u-boot-brain/arch/arm/mach-imx/imx8m/Kconfig
Ilko Iliev 7666cccf4f ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
Supported peripherals: Ethernet, eMMC, Serial.

U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14
+0200)
Normal Boot
Trying to boot from MMC2

U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200)

CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
Reset cause: POR
Model: Ronetix iMX8M-CM SoM
DRAM:  1 GiB
WDT:   Started with servicing (60s timeout)
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address -
42:0d:e7:78:da:53
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
u-boot=>

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00

159 lines
3.4 KiB
Plaintext

if ARCH_IMX8M
config IMX8M
bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
config IMX8MQ
bool
select IMX8M
config IMX8MM
bool
select IMX8M
config IMX8MN
bool
select IMX8M
config IMX8MP
bool
select IMX8M
config SYS_SOC
default "imx8m"
choice
prompt "NXP i.MX8M board select"
optional
config TARGET_IMX8MQ_CM
bool "Ronetix iMX8MQ-CM SoM"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MQ_PHANBELL
bool "imx8mq_phanbell"
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MM_EVK
bool "imx8mm LPDDR4 EVK board"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_ICORE_MX8MM
bool "Engicam i.Core MX8M Mini SOM"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
help
i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM.
i.Core MX8M Mini EDIMM2.2:
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
* i.Core MX8M Mini needs to mount on top of EDIMM2.2 for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
i.Core MX8M Mini C.TOUCH 2.0
* C.TOUCH 2.0 is a general purpose Carrier board.
* i.Core MX8M Mini needs to mount on top of this Carrier board
for creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
config TARGET_IMX8MM_VENICE
bool "Support Gateworks Venice iMX8M Mini module"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_EVK
bool "imx8mn LPDDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_DDR4_EVK
bool "imx8mn DDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
config TARGET_IMX8MP_EVK
bool "imx8mp LPDDR4 EVK board"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PICO_IMX8MQ
bool "Support Technexion Pico iMX8MQ"
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_VERDIN_IMX8MM
bool "Support Toradex Verdin iMX8M Mini module"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_BEACON
bool "imx8mm Beacon Embedded devkit"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_BEACON
bool "imx8mn Beacon Embedded devkit"
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MM
bool "PHYTEC PHYCORE i.MX8MM"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MP
bool "PHYTEC PHYCORE i.MX8MP"
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_CL_IOT_GATE
bool "CompuLab iot-gate-imx8"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
endchoice
source "board/beacon/imx8mm/Kconfig"
source "board/beacon/imx8mn/Kconfig"
source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
source "board/engicam/imx8mm/Kconfig"
source "board/freescale/imx8mq_evk/Kconfig"
source "board/freescale/imx8mm_evk/Kconfig"
source "board/freescale/imx8mn_evk/Kconfig"
source "board/freescale/imx8mp_evk/Kconfig"
source "board/gateworks/venice/Kconfig"
source "board/google/imx8mq_phanbell/Kconfig"
source "board/phytec/phycore_imx8mm/Kconfig"
source "board/phytec/phycore_imx8mp/Kconfig"
source "board/ronetix/imx8mq-cm/Kconfig"
source "board/technexion/pico-imx8mq/Kconfig"
source "board/toradex/verdin-imx8mm/Kconfig"
endif