u-boot-brain/include/power
Matti Vaittinen 21b02414f1 regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs
BD71837 and BD71847 is PMIC intended for powering single-core,
dual-core, and quad-core SoC’s such as NXP-i.MX 8M. BD71847
is used for example on NXP imx8mm EVK.

Add regulator driver for ROHM BD71837 and BD71847 PMICs.
BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced
version containing 6 bucks and 6 LDOs. Voltages for DVS
bucks (1-4 on BD71837, 1 and 2 on BD71847) can be adjusted
when regulators are enabled. For other bucks and LDOs we may
have over- or undershooting if voltage is adjusted when
regulator is enabled. Thus this is prevented by default.

BD718x7 has a quirk which may leave power output disabled
after reset if enable/disable state was controlled by SW.
Thus the SW control is only allowed for BD71837  bucks
3 and 4 by default. The impact of this limitation must be
evaluated board-by board and restrictions may need to be
modified. (Linux driver get's these limitations from DT and we
may want to implement same on u-Boot driver).

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-19 15:18:47 +02:00
..
act8846_pmic.h
as3722.h
battery.h
bd71837.h regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs 2019-07-19 15:18:47 +02:00
fg_battery_cell_params.h
hi6553_pmic.h
lp873x.h
lp87565.h
ltc3676_pmic.h
max8997_muic.h
max8997_pmic.h
max8998_pmic.h
max17042_fg.h
max77686_pmic.h
max77693_fg.h
max77693_muic.h
max77693_pmic.h
max77696_pmic.h
mc34vr500_pmic.h
palmas.h
pfuze100_pmic.h
pfuze3000_pmic.h
pmic.h
power_chrg.h
regulator.h
rk8xx_pmic.h
rn5t567_pmic.h
s2mps11.h
s5m8767.h
sandbox_pmic.h
stpmic1.h stpmic1: add NVM update support in fuse command 2019-04-12 16:09:13 +02:00
tps62362.h
tps65090.h
tps65217.h
tps65218.h
tps65910_pmic.h
tps65910.h