mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![]() u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
||
---|---|---|
.. | ||
imx6ul.c | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit: ------------------------------------------------------------------- $ make mrproper - Configure U-Boot for Engicam GEAM6UL: $ make imx6ul_geam_mmc_defconfig - Configure U-Boot for Engicam Is.IoT MX6UL: $ make imx6ul_isiot_mmc_defconfig - Build U-Boot $ make This will generate the SPL image called SPL and the u-boot-dtb.img. - Flash the SPL image into the micro SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot-dtb.img image into the micro SD card: sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync - Jumper settings: MMC Boot: JM3 Closed - Connect the Serial cable between the Starter Kit and the PC for the console. (J28 is the Linux Serial console connector) - Insert the micro SD card in the board, power it up and U-Boot messages should come up.