mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Rasmus Villemoes](/assets/img/avatar_default.png)
The reference manuals for MPC8308 and MPC8309 both say that the esdhcctl aka DMA Control Register "is implemented as SDHCCR" in the System configuration registers. Unfortunately, that doesn't mean that the registers are just mirrors of each other - any write to esdhcctl is simply ignored. So to actually enable cache snooping, we unfortunately have to add a little ifdeffery. There is, naturally, no description of the bit fields of esdhcctl in the MPC8309 manual, but comparing the description of esdhcctl from the LS1021A reference manual to the description of the sdhccr in MPC8309, one also finds that the fields are bit-reversed, so the bit to set is 0x02000000 rather than 0x00000040 - this is also what board_mmc_init() uses in the two gdsys/mpc8308/ boards. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
945 lines
23 KiB
C
945 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
|
|
* Copyright 2019 NXP Semiconductors
|
|
* Andy Fleming
|
|
*
|
|
* Based vaguely on the pxa mmc code:
|
|
* (C) Copyright 2003
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <cpu_func.h>
|
|
#include <errno.h>
|
|
#include <hwconfig.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <malloc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct fsl_esdhc {
|
|
uint dsaddr; /* SDMA system address register */
|
|
uint blkattr; /* Block attributes register */
|
|
uint cmdarg; /* Command argument register */
|
|
uint xfertyp; /* Transfer type register */
|
|
uint cmdrsp0; /* Command response 0 register */
|
|
uint cmdrsp1; /* Command response 1 register */
|
|
uint cmdrsp2; /* Command response 2 register */
|
|
uint cmdrsp3; /* Command response 3 register */
|
|
uint datport; /* Buffer data port register */
|
|
uint prsstat; /* Present state register */
|
|
uint proctl; /* Protocol control register */
|
|
uint sysctl; /* System Control Register */
|
|
uint irqstat; /* Interrupt status register */
|
|
uint irqstaten; /* Interrupt status enable register */
|
|
uint irqsigen; /* Interrupt signal enable register */
|
|
uint autoc12err; /* Auto CMD error status register */
|
|
uint hostcapblt; /* Host controller capabilities register */
|
|
uint wml; /* Watermark level register */
|
|
char reserved1[8]; /* reserved */
|
|
uint fevt; /* Force event register */
|
|
uint admaes; /* ADMA error status register */
|
|
uint adsaddr; /* ADMA system address register */
|
|
char reserved2[160];
|
|
uint hostver; /* Host controller version register */
|
|
char reserved3[4]; /* reserved */
|
|
uint dmaerraddr; /* DMA error address register */
|
|
char reserved4[4]; /* reserved */
|
|
uint dmaerrattr; /* DMA error attribute register */
|
|
char reserved5[4]; /* reserved */
|
|
uint hostcapblt2; /* Host controller capabilities register 2 */
|
|
char reserved6[756]; /* reserved */
|
|
uint esdhcctl; /* eSDHC control register */
|
|
};
|
|
|
|
struct fsl_esdhc_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
/**
|
|
* struct fsl_esdhc_priv
|
|
*
|
|
* @esdhc_regs: registers of the sdhc controller
|
|
* @sdhc_clk: Current clk of the sdhc controller
|
|
* @bus_width: bus width, 1bit, 4bit or 8bit
|
|
* @cfg: mmc config
|
|
* @mmc: mmc
|
|
* Following is used when Driver Model is enabled for MMC
|
|
* @dev: pointer for the device
|
|
* @cd_gpio: gpio for card detection
|
|
* @wp_gpio: gpio for write protection
|
|
*/
|
|
struct fsl_esdhc_priv {
|
|
struct fsl_esdhc *esdhc_regs;
|
|
unsigned int sdhc_clk;
|
|
bool is_sdhc_per_clk;
|
|
unsigned int clock;
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
struct mmc *mmc;
|
|
#endif
|
|
struct udevice *dev;
|
|
};
|
|
|
|
/* Return the XFERTYP flags for a given command and data packet */
|
|
static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
uint xfertyp = 0;
|
|
|
|
if (data) {
|
|
xfertyp |= XFERTYP_DPSEL;
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
xfertyp |= XFERTYP_DMAEN;
|
|
#endif
|
|
if (data->blocks > 1) {
|
|
xfertyp |= XFERTYP_MSBSEL;
|
|
xfertyp |= XFERTYP_BCEN;
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
xfertyp |= XFERTYP_AC12EN;
|
|
#endif
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
xfertyp |= XFERTYP_DTDSEL;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
xfertyp |= XFERTYP_CCCEN;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
xfertyp |= XFERTYP_CICEN;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
xfertyp |= XFERTYP_RSPTYP_136;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
xfertyp |= XFERTYP_RSPTYP_48_BUSY;
|
|
else if (cmd->resp_type & MMC_RSP_PRESENT)
|
|
xfertyp |= XFERTYP_RSPTYP_48;
|
|
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
xfertyp |= XFERTYP_CMDTYP_ABORT;
|
|
|
|
return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
/*
|
|
* PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
|
|
*/
|
|
static void esdhc_pio_read_write(struct fsl_esdhc_priv *priv,
|
|
struct mmc_data *data)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
uint blocks;
|
|
char *buffer;
|
|
uint databuf;
|
|
uint size;
|
|
uint irqstat;
|
|
ulong start;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
blocks = data->blocks;
|
|
buffer = data->dest;
|
|
while (blocks) {
|
|
start = get_timer(0);
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN)) {
|
|
if (get_timer(start) > PIO_TIMEOUT) {
|
|
printf("\nData Read Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
databuf = in_le32(®s->datport);
|
|
*((uint *)buffer) = databuf;
|
|
buffer += 4;
|
|
size -= 4;
|
|
}
|
|
blocks--;
|
|
}
|
|
} else {
|
|
blocks = data->blocks;
|
|
buffer = (char *)data->src;
|
|
while (blocks) {
|
|
start = get_timer(0);
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN)) {
|
|
if (get_timer(start) > PIO_TIMEOUT) {
|
|
printf("\nData Write Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
databuf = *((uint *)buffer);
|
|
buffer += 4;
|
|
size -= 4;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
out_le32(®s->datport, databuf);
|
|
}
|
|
blocks--;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
|
|
struct mmc_data *data)
|
|
{
|
|
int timeout;
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
#if defined(CONFIG_FSL_LAYERSCAPE)
|
|
dma_addr_t addr;
|
|
#endif
|
|
uint wml_value;
|
|
|
|
wml_value = data->blocksize/4;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
if (wml_value > WML_RD_WML_MAX)
|
|
wml_value = WML_RD_WML_MAX_VAL;
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
#if defined(CONFIG_FSL_LAYERSCAPE)
|
|
addr = virt_to_phys((void *)(data->dest));
|
|
if (upper_32_bits(addr))
|
|
printf("Error found for upper 32 bits\n");
|
|
else
|
|
esdhc_write32(®s->dsaddr, lower_32_bits(addr));
|
|
#else
|
|
esdhc_write32(®s->dsaddr, (u32)data->dest);
|
|
#endif
|
|
#endif
|
|
} else {
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
flush_dcache_range((ulong)data->src,
|
|
(ulong)data->src+data->blocks
|
|
*data->blocksize);
|
|
#endif
|
|
if (wml_value > WML_WR_WML_MAX)
|
|
wml_value = WML_WR_WML_MAX_VAL;
|
|
|
|
if (!(esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL)) {
|
|
printf("Can not write to locked SD card.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
|
|
wml_value << 16);
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
#if defined(CONFIG_FSL_LAYERSCAPE)
|
|
addr = virt_to_phys((void *)(data->src));
|
|
if (upper_32_bits(addr))
|
|
printf("Error found for upper 32 bits\n");
|
|
else
|
|
esdhc_write32(®s->dsaddr, lower_32_bits(addr));
|
|
#else
|
|
esdhc_write32(®s->dsaddr, (u32)data->src);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
|
|
|
|
/* Calculate the timeout period for data transactions */
|
|
/*
|
|
* 1)Timeout period = (2^(timeout+13)) SD Clock cycles
|
|
* 2)Timeout period should be minimum 0.250sec as per SD Card spec
|
|
* So, Number of SD Clock cycles for 0.25sec should be minimum
|
|
* (SD Clock/sec * 0.25 sec) SD Clock cycles
|
|
* = (mmc->clock * 1/4) SD Clock cycles
|
|
* As 1) >= 2)
|
|
* => (2^(timeout+13)) >= mmc->clock * 1/4
|
|
* Taking log2 both the sides
|
|
* => timeout + 13 >= log2(mmc->clock/4)
|
|
* Rounding up to next power of 2
|
|
* => timeout + 13 = log2(mmc->clock/4) + 1
|
|
* => timeout + 13 = fls(mmc->clock/4)
|
|
*
|
|
* However, the MMC spec "It is strongly recommended for hosts to
|
|
* implement more than 500ms timeout value even if the card
|
|
* indicates the 250ms maximum busy length." Even the previous
|
|
* value of 300ms is known to be insufficient for some cards.
|
|
* So, we use
|
|
* => timeout + 13 = fls(mmc->clock/2)
|
|
*/
|
|
timeout = fls(mmc->clock/2);
|
|
timeout -= 13;
|
|
|
|
if (timeout > 14)
|
|
timeout = 14;
|
|
|
|
if (timeout < 0)
|
|
timeout = 0;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
|
|
if ((timeout == 4) || (timeout == 8) || (timeout == 12))
|
|
timeout++;
|
|
#endif
|
|
|
|
#ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
|
|
timeout = 0xE;
|
|
#endif
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void check_and_invalidate_dcache_range
|
|
(struct mmc_cmd *cmd,
|
|
struct mmc_data *data) {
|
|
unsigned start = 0;
|
|
unsigned end = 0;
|
|
unsigned size = roundup(ARCH_DMA_MINALIGN,
|
|
data->blocks*data->blocksize);
|
|
#if defined(CONFIG_FSL_LAYERSCAPE)
|
|
dma_addr_t addr;
|
|
|
|
addr = virt_to_phys((void *)(data->dest));
|
|
if (upper_32_bits(addr))
|
|
printf("Error found for upper 32 bits\n");
|
|
else
|
|
start = lower_32_bits(addr);
|
|
#else
|
|
start = (unsigned)data->dest;
|
|
#endif
|
|
end = start + size;
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
|
|
/*
|
|
* Sends a command out on the bus. Takes the mmc pointer,
|
|
* a command pointer, and an optional data pointer.
|
|
*/
|
|
static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
|
|
struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
int err = 0;
|
|
uint xfertyp;
|
|
uint irqstat;
|
|
u32 flags = IRQSTAT_CC | IRQSTAT_CTOE;
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
unsigned long start;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
return 0;
|
|
#endif
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
sync();
|
|
|
|
/* Wait for the bus to be idle */
|
|
while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) ||
|
|
(esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB))
|
|
;
|
|
|
|
while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)
|
|
;
|
|
|
|
/* Wait at least 8 SD clock cycles before the next command */
|
|
/*
|
|
* Note: This is way more than 8 cycles, but 1ms seems to
|
|
* resolve timing issues with some cards
|
|
*/
|
|
udelay(1000);
|
|
|
|
/* Set up for a data transfer if we have one */
|
|
if (data) {
|
|
err = esdhc_setup_data(priv, mmc, data);
|
|
if(err)
|
|
return err;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
check_and_invalidate_dcache_range(cmd, data);
|
|
}
|
|
|
|
/* Figure out the transfer arguments */
|
|
xfertyp = esdhc_xfertyp(cmd, data);
|
|
|
|
/* Mask all irqs */
|
|
esdhc_write32(®s->irqsigen, 0);
|
|
|
|
/* Send the command */
|
|
esdhc_write32(®s->cmdarg, cmd->cmdarg);
|
|
esdhc_write32(®s->xfertyp, xfertyp);
|
|
|
|
/* Wait for the command to complete */
|
|
start = get_timer(0);
|
|
while (!(esdhc_read32(®s->irqstat) & flags)) {
|
|
if (get_timer(start) > 1000) {
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
|
|
if (irqstat & CMD_ERR) {
|
|
err = -ECOMM;
|
|
goto out;
|
|
}
|
|
|
|
if (irqstat & IRQSTAT_CTOE) {
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
/* Workaround for ESDHC errata ENGcm03648 */
|
|
if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
|
|
int timeout = 6000;
|
|
|
|
/* Poll on DATA0 line for cmd with busy signal for 600 ms */
|
|
while (timeout > 0 && !(esdhc_read32(®s->prsstat) &
|
|
PRSSTAT_DAT0)) {
|
|
udelay(100);
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
printf("Timeout waiting for DAT0 to go high!\n");
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Copy the response to the response buffer */
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
|
|
|
|
cmdrsp3 = esdhc_read32(®s->cmdrsp3);
|
|
cmdrsp2 = esdhc_read32(®s->cmdrsp2);
|
|
cmdrsp1 = esdhc_read32(®s->cmdrsp1);
|
|
cmdrsp0 = esdhc_read32(®s->cmdrsp0);
|
|
cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
|
|
cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
|
|
cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
|
|
cmd->response[3] = (cmdrsp0 << 8);
|
|
} else
|
|
cmd->response[0] = esdhc_read32(®s->cmdrsp0);
|
|
|
|
/* Wait until all of the blocks are transferred */
|
|
if (data) {
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
esdhc_pio_read_write(priv, data);
|
|
#else
|
|
do {
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
|
|
if (irqstat & IRQSTAT_DTOE) {
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
if (irqstat & DATA_ERR) {
|
|
err = -ECOMM;
|
|
goto out;
|
|
}
|
|
} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
|
|
|
|
/*
|
|
* Need invalidate the dcache here again to avoid any
|
|
* cache-fill during the DMA operations such as the
|
|
* speculative pre-fetching etc.
|
|
*/
|
|
if (data->flags & MMC_DATA_READ) {
|
|
check_and_invalidate_dcache_range(cmd, data);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
out:
|
|
/* Reset CMD and DATA portions on error */
|
|
if (err) {
|
|
esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTC);
|
|
while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC)
|
|
;
|
|
|
|
if (data) {
|
|
esdhc_write32(®s->sysctl,
|
|
esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTD);
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD))
|
|
;
|
|
}
|
|
}
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
int div = 1;
|
|
int pre_div = 2;
|
|
unsigned int sdhc_clk = priv->sdhc_clk;
|
|
u32 time_out;
|
|
u32 value;
|
|
uint clk;
|
|
|
|
if (clock < mmc->cfg->f_min)
|
|
clock = mmc->cfg->f_min;
|
|
|
|
while (sdhc_clk / (16 * pre_div) > clock && pre_div < 256)
|
|
pre_div *= 2;
|
|
|
|
while (sdhc_clk / (div * pre_div) > clock && div < 16)
|
|
div++;
|
|
|
|
pre_div >>= 1;
|
|
div -= 1;
|
|
|
|
clk = (pre_div << 8) | (div << 4);
|
|
|
|
esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
|
|
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
|
|
|
|
time_out = 20;
|
|
value = PRSSTAT_SDSTB;
|
|
while (!(esdhc_read32(®s->prsstat) & value)) {
|
|
if (time_out == 0) {
|
|
printf("fsl_esdhc: Internal clock never stabilised.\n");
|
|
break;
|
|
}
|
|
time_out--;
|
|
mdelay(1);
|
|
}
|
|
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
|
|
}
|
|
|
|
static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
u32 value;
|
|
u32 time_out;
|
|
|
|
value = esdhc_read32(®s->sysctl);
|
|
|
|
if (enable)
|
|
value |= SYSCTL_CKEN;
|
|
else
|
|
value &= ~SYSCTL_CKEN;
|
|
|
|
esdhc_write32(®s->sysctl, value);
|
|
|
|
time_out = 20;
|
|
value = PRSSTAT_SDSTB;
|
|
while (!(esdhc_read32(®s->prsstat) & value)) {
|
|
if (time_out == 0) {
|
|
printf("fsl_esdhc: Internal clock never stabilised.\n");
|
|
break;
|
|
}
|
|
time_out--;
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
|
|
if (priv->is_sdhc_per_clk) {
|
|
/* Select to use peripheral clock */
|
|
esdhc_clock_control(priv, false);
|
|
esdhc_setbits32(®s->esdhcctl, ESDHCCTL_PCS);
|
|
esdhc_clock_control(priv, true);
|
|
}
|
|
|
|
/* Set the clock speed */
|
|
if (priv->clock != mmc->clock)
|
|
set_sysctl(priv, mmc, mmc->clock);
|
|
|
|
/* Set the bus width */
|
|
esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
|
|
|
|
if (mmc->bus_width == 4)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_4);
|
|
else if (mmc->bus_width == 8)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void esdhc_enable_cache_snooping(struct fsl_esdhc *regs)
|
|
{
|
|
#ifdef CONFIG_ARCH_MPC830X
|
|
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
sysconf83xx_t *sysconf = &immr->sysconf;
|
|
|
|
setbits_be32(&sysconf->sdhccr, 0x02000000);
|
|
#else
|
|
esdhc_write32(®s->esdhcctl, 0x00000040);
|
|
#endif
|
|
}
|
|
|
|
static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
ulong start;
|
|
|
|
/* Reset the entire host controller */
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
|
|
|
|
/* Wait until the controller is available */
|
|
start = get_timer(0);
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA)) {
|
|
if (get_timer(start) > 1000)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
esdhc_enable_cache_snooping(regs);
|
|
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
|
|
|
|
/* Set the initial clock speed */
|
|
mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);
|
|
|
|
/* Disable the BRR and BWR bits in IRQSTAT */
|
|
esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
|
|
|
|
/* Put the PROCTL reg back to the default */
|
|
esdhc_write32(®s->proctl, PROCTL_INIT);
|
|
|
|
/* Set timout to the maximum value */
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
int timeout = 1000;
|
|
|
|
#ifdef CONFIG_ESDHC_DETECT_QUIRK
|
|
if (CONFIG_ESDHC_DETECT_QUIRK)
|
|
return 1;
|
|
#endif
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
|
|
udelay(1000);
|
|
|
|
return timeout > 0;
|
|
}
|
|
|
|
static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
|
|
struct mmc_config *cfg)
|
|
{
|
|
struct fsl_esdhc *regs = priv->esdhc_regs;
|
|
u32 caps;
|
|
|
|
caps = esdhc_read32(®s->hostcapblt);
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
|
|
caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
|
|
caps |= HOSTCAPBLT_VS33;
|
|
#endif
|
|
if (caps & HOSTCAPBLT_VS18)
|
|
cfg->voltages |= MMC_VDD_165_195;
|
|
if (caps & HOSTCAPBLT_VS30)
|
|
cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
|
|
if (caps & HOSTCAPBLT_VS33)
|
|
cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
cfg->name = "FSL_SDHC";
|
|
|
|
if (caps & HOSTCAPBLT_HSS)
|
|
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
cfg->f_min = 400000;
|
|
cfg->f_max = min(priv->sdhc_clk, (u32)200000000);
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
|
|
void mmc_adapter_card_type_ident(void)
|
|
{
|
|
u8 card_id;
|
|
u8 value;
|
|
|
|
card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
|
|
gd->arch.sdhc_adapter = card_id;
|
|
|
|
switch (card_id) {
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
|
|
value = QIXIS_READ(brdcfg[5]);
|
|
value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7);
|
|
QIXIS_WRITE(brdcfg[5], value);
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
|
|
value = QIXIS_READ(pwr_ctl[1]);
|
|
value |= QIXIS_EVDD_BY_SDHC_VS;
|
|
QIXIS_WRITE(pwr_ctl[1], value);
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
|
|
value = QIXIS_READ(brdcfg[5]);
|
|
value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
|
|
QIXIS_WRITE(brdcfg[5], value);
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_RSV:
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_MMC:
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_SD:
|
|
break;
|
|
case QIXIS_ESDHC_NO_ADAPTER:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_LIBFDT
|
|
__weak int esdhc_status_fixup(void *blob, const char *compat)
|
|
{
|
|
#ifdef CONFIG_FSL_ESDHC_PIN_MUX
|
|
if (!hwconfig("esdhc")) {
|
|
do_fixup_by_compat(blob, compat, "status", "disabled",
|
|
sizeof("disabled"), 1);
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
void fdt_fixup_esdhc(void *blob, bd_t *bd)
|
|
{
|
|
const char *compat = "fsl,esdhc";
|
|
|
|
if (esdhc_status_fixup(blob, compat))
|
|
return;
|
|
|
|
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
|
|
gd->arch.sdhc_clk, 1);
|
|
}
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int esdhc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_priv *priv = mmc->priv;
|
|
|
|
return esdhc_getcd_common(priv);
|
|
}
|
|
|
|
static int esdhc_init(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_priv *priv = mmc->priv;
|
|
|
|
return esdhc_init_common(priv, mmc);
|
|
}
|
|
|
|
static int esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct fsl_esdhc_priv *priv = mmc->priv;
|
|
|
|
return esdhc_send_cmd_common(priv, mmc, cmd, data);
|
|
}
|
|
|
|
static int esdhc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_priv *priv = mmc->priv;
|
|
|
|
return esdhc_set_ios_common(priv, mmc);
|
|
}
|
|
|
|
static const struct mmc_ops esdhc_ops = {
|
|
.getcd = esdhc_getcd,
|
|
.init = esdhc_init,
|
|
.send_cmd = esdhc_send_cmd,
|
|
.set_ios = esdhc_set_ios,
|
|
};
|
|
|
|
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
|
|
{
|
|
struct fsl_esdhc_plat *plat;
|
|
struct fsl_esdhc_priv *priv;
|
|
struct mmc_config *mmc_cfg;
|
|
struct mmc *mmc;
|
|
|
|
if (!cfg)
|
|
return -EINVAL;
|
|
|
|
priv = calloc(sizeof(struct fsl_esdhc_priv), 1);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
plat = calloc(sizeof(struct fsl_esdhc_plat), 1);
|
|
if (!plat) {
|
|
free(priv);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base);
|
|
priv->sdhc_clk = cfg->sdhc_clk;
|
|
if (gd->arch.sdhc_per_clk)
|
|
priv->is_sdhc_per_clk = true;
|
|
|
|
mmc_cfg = &plat->cfg;
|
|
|
|
if (cfg->max_bus_width == 8) {
|
|
mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT |
|
|
MMC_MODE_8BIT;
|
|
} else if (cfg->max_bus_width == 4) {
|
|
mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT;
|
|
} else if (cfg->max_bus_width == 1) {
|
|
mmc_cfg->host_caps |= MMC_MODE_1BIT;
|
|
} else {
|
|
mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT |
|
|
MMC_MODE_8BIT;
|
|
printf("No max bus width provided. Assume 8-bit supported.\n");
|
|
}
|
|
|
|
#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
|
|
if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
|
|
mmc_cfg->host_caps &= ~MMC_MODE_8BIT;
|
|
#endif
|
|
mmc_cfg->ops = &esdhc_ops;
|
|
|
|
fsl_esdhc_get_cfg_common(priv, mmc_cfg);
|
|
|
|
mmc = mmc_create(mmc_cfg, priv);
|
|
if (!mmc)
|
|
return -EIO;
|
|
|
|
priv->mmc = mmc;
|
|
return 0;
|
|
}
|
|
|
|
int fsl_esdhc_mmc_init(bd_t *bis)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg;
|
|
|
|
cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
|
|
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
|
|
/* Prefer peripheral clock which provides higher frequency. */
|
|
if (gd->arch.sdhc_per_clk)
|
|
cfg->sdhc_clk = gd->arch.sdhc_per_clk;
|
|
else
|
|
cfg->sdhc_clk = gd->arch.sdhc_clk;
|
|
return fsl_esdhc_initialize(bis, cfg);
|
|
}
|
|
#else /* DM_MMC */
|
|
static int fsl_esdhc_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
|
|
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
|
|
fdt_addr_t addr;
|
|
struct mmc *mmc;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
#ifdef CONFIG_PPC
|
|
priv->esdhc_regs = (struct fsl_esdhc *)lower_32_bits(addr);
|
|
#else
|
|
priv->esdhc_regs = (struct fsl_esdhc *)addr;
|
|
#endif
|
|
priv->dev = dev;
|
|
|
|
if (gd->arch.sdhc_per_clk) {
|
|
priv->sdhc_clk = gd->arch.sdhc_per_clk;
|
|
priv->is_sdhc_per_clk = true;
|
|
} else {
|
|
priv->sdhc_clk = gd->arch.sdhc_clk;
|
|
}
|
|
|
|
if (priv->sdhc_clk <= 0) {
|
|
dev_err(dev, "Unable to get clk for %s\n", dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fsl_esdhc_get_cfg_common(priv, &plat->cfg);
|
|
|
|
mmc_of_parse(dev, &plat->cfg);
|
|
|
|
mmc = &plat->mmc;
|
|
mmc->cfg = &plat->cfg;
|
|
mmc->dev = dev;
|
|
|
|
upriv->mmc = mmc;
|
|
|
|
return esdhc_init_common(priv, mmc);
|
|
}
|
|
|
|
static int fsl_esdhc_get_cd(struct udevice *dev)
|
|
{
|
|
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
|
|
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
|
|
|
|
if (plat->cfg.host_caps & MMC_CAP_NONREMOVABLE)
|
|
return 1;
|
|
|
|
return esdhc_getcd_common(priv);
|
|
}
|
|
|
|
static int fsl_esdhc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
|
|
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
|
|
|
|
return esdhc_send_cmd_common(priv, &plat->mmc, cmd, data);
|
|
}
|
|
|
|
static int fsl_esdhc_set_ios(struct udevice *dev)
|
|
{
|
|
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
|
|
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
|
|
|
|
return esdhc_set_ios_common(priv, &plat->mmc);
|
|
}
|
|
|
|
static const struct dm_mmc_ops fsl_esdhc_ops = {
|
|
.get_cd = fsl_esdhc_get_cd,
|
|
.send_cmd = fsl_esdhc_send_cmd,
|
|
.set_ios = fsl_esdhc_set_ios,
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
.execute_tuning = fsl_esdhc_execute_tuning,
|
|
#endif
|
|
};
|
|
|
|
static const struct udevice_id fsl_esdhc_ids[] = {
|
|
{ .compatible = "fsl,esdhc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int fsl_esdhc_bind(struct udevice *dev)
|
|
{
|
|
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
U_BOOT_DRIVER(fsl_esdhc) = {
|
|
.name = "fsl-esdhc-mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = fsl_esdhc_ids,
|
|
.ops = &fsl_esdhc_ops,
|
|
.bind = fsl_esdhc_bind,
|
|
.probe = fsl_esdhc_probe,
|
|
.platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat),
|
|
.priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),
|
|
};
|
|
#endif
|