mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-10 20:23:54 +09:00
62cdfdcc81
Functions spl_dram_init() and power_init_board() are used only in the scope of this file, so make them static to fix the following sparse warnings: board/freescale/imx8mm_evk/spl.c:40:6: warning: no previous prototype for ‘spl_dram_init’ [-Wmissing-prototypes] board/freescale/imx8mm_evk/spl.c:85:5: warning: no previous prototype for ‘power_init_board’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> |
||
---|---|---|
.. | ||
imx8mm_evk.c | ||
Kconfig | ||
lpddr4_timing.c | ||
MAINTAINERS | ||
Makefile | ||
README | ||
spl.c |
U-Boot for the NXP i.MX8MM EVK board Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr fimware - Build U-Boot - Boot Get and Build the ARM Trusted firmware ====================================== Note: builddir is U-Boot build directory (source directory for in-tree builds) Get ATF from: https://source.codeaurora.org/external/imx/imx-atf branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mm bl31 $ cp build/imx8mm/release/bl31.bin $(builddir) Get the ddr firmware ============================= $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin $ chmod +x firmware-imx-8.0.bin $ ./firmware-imx-8.0 $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir) Build U-Boot ============ $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig $ export ATF_LOAD_ADDR=0x920000 $ make flash.bin Burn the flash.bin to MicroSD card offset 33KB $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 Boot ==== Set Boot switch to SD boot