u-boot-brain/arch/x86/cpu/intel_common/itss.c

248 lines
6.0 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Interrupt Timer Subsystem
*
* Copyright (C) 2017 Intel Corporation.
* Copyright (C) 2017 Siemens AG
* Copyright 2019 Google LLC
*
* Taken from coreboot itss.c
*/
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
#include <irq.h>
#include <log.h>
#include <malloc.h>
#include <p2sb.h>
#include <spl.h>
#include <asm/itss.h>
struct itss_platdata {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
/* Put this first since driver model will copy the data here */
struct dtd_intel_itss dtplat;
#endif
};
/* struct pmc_route - Routing for PMC to GPIO */
struct pmc_route {
u32 pmc;
u32 gpio;
};
struct itss_priv {
struct pmc_route *route;
uint route_count;
u32 irq_snapshot[NUM_IPC_REGS];
};
static int set_polarity(struct udevice *dev, uint irq, bool active_low)
{
u32 mask;
uint reg;
if (irq > ITSS_MAX_IRQ)
return -EINVAL;
reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * (irq / IRQS_PER_IPC);
mask = 1 << (irq % IRQS_PER_IPC);
pcr_clrsetbits32(dev, reg, mask, active_low ? mask : 0);
return 0;
}
#ifndef CONFIG_TPL_BUILD
static int snapshot_polarities(struct udevice *dev)
{
struct itss_priv *priv = dev_get_priv(dev);
const int start = GPIO_IRQ_START;
const int end = GPIO_IRQ_END;
int reg_start;
int reg_end;
int i;
reg_start = start / IRQS_PER_IPC;
reg_end = DIV_ROUND_UP(end, IRQS_PER_IPC);
log_debug("ITSS IRQ Polarities snapshot %p\n", priv->irq_snapshot);
for (i = reg_start; i < reg_end; i++) {
uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
priv->irq_snapshot[i] = pcr_read32(dev, reg);
log_debug(" - %d, reg %x: irq_snapshot[i] %x\n", i, reg,
priv->irq_snapshot[i]);
}
/* Save the snapshot for use after relocation */
gd->start_addr_sp -= sizeof(*priv);
gd->start_addr_sp &= ~0xf;
gd->arch.itss_priv = (void *)gd->start_addr_sp;
memcpy(gd->arch.itss_priv, priv, sizeof(*priv));
return 0;
}
static void show_polarities(struct udevice *dev, const char *msg)
{
int i;
log_debug("ITSS IRQ Polarities %s:\n", msg);
for (i = 0; i < NUM_IPC_REGS; i++) {
uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
log_debug("IPC%d: 0x%08x\n", i, pcr_read32(dev, reg));
}
}
static int restore_polarities(struct udevice *dev)
{
struct itss_priv *priv = dev_get_priv(dev);
struct itss_priv *old_priv;
const int start = GPIO_IRQ_START;
const int end = GPIO_IRQ_END;
int reg_start;
int reg_end;
int i;
/* Get the snapshot which was stored by the pre-reloc device */
old_priv = gd->arch.itss_priv;
if (!old_priv)
return log_msg_ret("priv", -EFAULT);
memcpy(priv->irq_snapshot, old_priv->irq_snapshot,
sizeof(priv->irq_snapshot));
show_polarities(dev, "Before");
log_debug("priv->irq_snapshot %p\n", priv->irq_snapshot);
reg_start = start / IRQS_PER_IPC;
reg_end = DIV_ROUND_UP(end, IRQS_PER_IPC);
for (i = reg_start; i < reg_end; i++) {
u32 mask;
u16 reg;
int irq_start;
int irq_end;
irq_start = i * IRQS_PER_IPC;
irq_end = min(irq_start + IRQS_PER_IPC - 1, ITSS_MAX_IRQ);
if (start > irq_end)
continue;
if (end < irq_start)
break;
/* Track bits within the bounds of of the register */
irq_start = max(start, irq_start) % IRQS_PER_IPC;
irq_end = min(end, irq_end) % IRQS_PER_IPC;
/* Create bitmask of the inclusive range of start and end */
mask = (((1U << irq_end) - 1) | (1U << irq_end));
mask &= ~((1U << irq_start) - 1);
reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
log_debug(" - %d, reg %x: mask %x, irq_snapshot[i] %x\n",
i, reg, mask, priv->irq_snapshot[i]);
pcr_clrsetbits32(dev, reg, mask, mask & priv->irq_snapshot[i]);
}
show_polarities(dev, "After");
return 0;
}
#endif
static int route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num)
{
struct itss_priv *priv = dev_get_priv(dev);
struct pmc_route *route;
int i;
for (i = 0, route = priv->route; i < priv->route_count; i++, route++) {
if (pmc_gpe_num == route->pmc)
return route->gpio;
}
return -ENOENT;
}
static int itss_bind(struct udevice *dev)
{
/* This is not set with of-platdata, so set it manually */
if (CONFIG_IS_ENABLED(OF_PLATDATA))
dev->driver_data = X86_IRQT_ITSS;
return 0;
}
static int itss_ofdata_to_platdata(struct udevice *dev)
{
struct itss_priv *priv = dev_get_priv(dev);
int ret;
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct itss_platdata *plat = dev_get_platdata(dev);
struct dtd_intel_itss *dtplat = &plat->dtplat;
/*
* It would be nice to do this in the bind() method, but with
* of-platdata binding happens in the order that DM finds things in the
* linker list (i.e. alphabetical order by driver name). So the GPIO
* device may well be bound before its parent (p2sb), and this call
* will fail if p2sb is not bound yet.
*
* TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc
*/
ret = p2sb_set_port_id(dev, dtplat->intel_p2sb_port_id);
if (ret)
return log_msg_ret("Could not set port id", ret);
priv->route = (struct pmc_route *)dtplat->intel_pmc_routes;
priv->route_count = ARRAY_SIZE(dtplat->intel_pmc_routes) /
sizeof(struct pmc_route);
#else
int size;
size = dev_read_size(dev, "intel,pmc-routes");
if (size < 0)
return size;
priv->route = malloc(size);
if (!priv->route)
return -ENOMEM;
ret = dev_read_u32_array(dev, "intel,pmc-routes", (u32 *)priv->route,
size / sizeof(fdt32_t));
if (ret)
return log_msg_ret("Cannot read pmc-routes", ret);
priv->route_count = size / sizeof(struct pmc_route);
#endif
return 0;
}
static const struct irq_ops itss_ops = {
.route_pmc_gpio_gpe = route_pmc_gpio_gpe,
.set_polarity = set_polarity,
#ifndef CONFIG_TPL_BUILD
.snapshot_polarities = snapshot_polarities,
.restore_polarities = restore_polarities,
#endif
};
static const struct udevice_id itss_ids[] = {
{ .compatible = "intel,itss", .data = X86_IRQT_ITSS },
{ }
};
U_BOOT_DRIVER(intel_itss) = {
.name = "intel_itss",
.id = UCLASS_IRQ,
.of_match = itss_ids,
.ops = &itss_ops,
.bind = itss_bind,
.ofdata_to_platdata = itss_ofdata_to_platdata,
.platdata_auto = sizeof(struct itss_platdata),
.priv_auto = sizeof(struct itss_priv),
};