brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity
4139b17037
u-boot-brain/board/freescale/ls1043ardb
History
Sumit Garg 4139b17037 armv8: ls1043ardb: SPL size reduction 
Using changes in this patch we were able to reduce approx 10k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1043ardb/Makefile to remove
   compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1043ardb/ls1043ardb.c to keep
   only ddr_init and board_early_init_f funcations in case of SPL
   build.
3. Changes in ls1043a_common.h & ls1043ardb.h to remove driver
   specific macros due to which static data was being compiled in
   case of SPL build.
4. Disable MMC driver from bieng compiled in case of SPL NAND
   build and NAND driver from bieng compiled in case of SPL MMC build.
5. Remove I2C driver support from SPL in case of LS1043ARDB.

Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17 09:03:30 -07:00
..
cpld.c armv8/ls1043ardb: fix the limitation of using 'cpld reset' 2016-05-18 08:51:44 -07:00
cpld.h armv8/ls1043ardb: fix the limitation of using 'cpld reset' 2016-05-18 08:51:44 -07:00
ddr.c arm: freescale: Rename initdram() to fsl_initdram() 2017-04-12 13:28:32 -04:00
ddr.h board/freescale: Update ddr clk_adjust 2016-06-03 14:06:57 -07:00
eth.c armv8/ls1043a: Add Fman support 2015-10-29 10:34:01 -07:00
Kconfig NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUST 2017-01-24 10:33:59 -05:00
ls1043ardb_pbi.cfg armv8/ls1043ardb: Add nand boot support 2015-10-29 10:34:01 -07:00
ls1043ardb_rcw_nand.cfg armv8/ls1043ardb/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
ls1043ardb_rcw_sd.cfg armv8/ls1043ardb/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
ls1043ardb.c armv8: ls1043ardb: SPL size reduction 2017-04-17 09:03:30 -07:00
MAINTAINERS board/freescale: Update MAINTAINERS files 2016-08-02 09:47:34 -07:00
Makefile armv8: ls1043ardb: SPL size reduction 2017-04-17 09:03:30 -07:00
README armv8: fsl-layerscape: Organize SoC overview at common location 2016-06-03 14:12:50 -07:00

README 

Overview
--------
The LS1043A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043ARDB provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.

LS1043A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
SoC overview.

 LS1043ARDB board Overview
 -----------------------
 - SERDES Connections, 4 lanes supporting:
      - PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and
        standard PCIe card
      - QSGMII with x4 RJ45 connector
      - XFI with x1 RJ45 connector
 - DDR Controller
     - 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s
 -IFC/Local Bus
    - One 128MB NOR flash 16-bit data bus
    - One 512 MB NAND flash with ECC support
    - CPLD connection
 - USB 3.0
    - Two super speed USB 3.0 Type A ports
 - SDHC: connects directly to a full SD/MMC slot
 - DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
 - 4 I2C controllers
 - UART
   - Two 4-pin serial ports at up to 115.2 Kbit/s
   - Two DB9 D-Type connectors supporting one Serial port each
 - ARM JTAG support

Memory map from core's view
----------------------------
Start Address	End Address	Description		Size
0x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
0x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
0x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
0x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
0x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
0x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
0x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
0x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
0x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB

Booting Options
---------------
a) NOR boot
b) NAND boot
c) SD boot