mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
Pull the PL310 clearing code into common code, so it can be reused by Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
205 lines
4.4 KiB
C
205 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <linux/libfdt.h>
|
|
#include <altera.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <watchdog.h>
|
|
#include <asm/arch/misc.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/arch/scan_manager.h>
|
|
#include <asm/arch/system_manager.h>
|
|
#include <asm/arch/nic301.h>
|
|
#include <asm/arch/scu.h>
|
|
#include <asm/pl310.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_SYS_L2_PL310
|
|
static const struct pl310_regs *const pl310 =
|
|
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
|
|
#endif
|
|
|
|
struct bsel bsel_str[] = {
|
|
{ "rsvd", "Reserved", },
|
|
{ "fpga", "FPGA (HPS2FPGA Bridge)", },
|
|
{ "nand", "NAND Flash (1.8V)", },
|
|
{ "nand", "NAND Flash (3.0V)", },
|
|
{ "sd", "SD/MMC External Transceiver (1.8V)", },
|
|
{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
|
|
{ "qspi", "QSPI Flash (1.8V)", },
|
|
{ "qspi", "QSPI Flash (3.0V)", },
|
|
};
|
|
|
|
int dram_init(void)
|
|
{
|
|
if (fdtdec_setup_mem_size_base() != 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void enable_caches(void)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
|
|
icache_enable();
|
|
#endif
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
dcache_enable();
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_L2_PL310
|
|
void v7_outer_cache_enable(void)
|
|
{
|
|
struct udevice *dev;
|
|
|
|
if (uclass_get_device(UCLASS_CACHE, 0, &dev))
|
|
pr_err("cache controller driver NOT found!\n");
|
|
}
|
|
|
|
void v7_outer_cache_disable(void)
|
|
{
|
|
/* Disable the L2 cache */
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
|
|
void socfpga_pl310_clear(void)
|
|
{
|
|
u32 mask = 0xff, ena = 0;
|
|
|
|
icache_enable();
|
|
|
|
/* Disable the L2 cache */
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
|
|
writel(0x0, &pl310->pl310_tag_latency_ctrl);
|
|
writel(0x10, &pl310->pl310_data_latency_ctrl);
|
|
|
|
/* enable BRESP, instruction and data prefetch, full line of zeroes */
|
|
setbits_le32(&pl310->pl310_aux_ctrl,
|
|
L310_AUX_CTRL_DATA_PREFETCH_MASK |
|
|
L310_AUX_CTRL_INST_PREFETCH_MASK |
|
|
L310_SHARED_ATT_OVERRIDE_ENABLE);
|
|
|
|
/* Enable the L2 cache */
|
|
ena = readl(&pl310->pl310_ctrl);
|
|
ena |= L2X0_CTRL_EN;
|
|
|
|
/*
|
|
* Invalidate the PL310 L2 cache. Keep the invalidation code
|
|
* entirely in L1 I-cache to avoid any bus traffic through
|
|
* the L2.
|
|
*/
|
|
asm volatile(
|
|
".align 5 \n"
|
|
" b 3f \n"
|
|
"1: str %1, [%4] \n"
|
|
" dsb \n"
|
|
" isb \n"
|
|
" str %0, [%2] \n"
|
|
" dsb \n"
|
|
" isb \n"
|
|
"2: ldr %0, [%2] \n"
|
|
" cmp %0, #0 \n"
|
|
" bne 2b \n"
|
|
" str %0, [%3] \n"
|
|
" dsb \n"
|
|
" isb \n"
|
|
" b 4f \n"
|
|
"3: b 1b \n"
|
|
"4: nop \n"
|
|
: "+r"(mask), "+r"(ena)
|
|
: "r"(&pl310->pl310_inv_way),
|
|
"r"(&pl310->pl310_cache_sync), "r"(&pl310->pl310_ctrl)
|
|
: "memory", "cc");
|
|
|
|
/* Disable the L2 cache */
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
|
|
defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
|
|
int overwrite_console(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FPGA
|
|
/* add device descriptor to FPGA device table */
|
|
void socfpga_fpga_add(void *fpga_desc)
|
|
{
|
|
fpga_init();
|
|
fpga_add(fpga_altera, fpga_desc);
|
|
}
|
|
#endif
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
/*
|
|
* In case the watchdog is enabled, make sure to (re-)configure it
|
|
* so that the defined timeout is valid. Otherwise the SPL (Perloader)
|
|
* timeout value is still active which might too short for Linux
|
|
* booting.
|
|
*/
|
|
hw_watchdog_init();
|
|
#else
|
|
/*
|
|
* If the HW watchdog is NOT enabled, make sure it is not running,
|
|
* for example because it was enabled in the preloader. This might
|
|
* trigger a watchdog-triggered reboot of Linux kernel later.
|
|
* Toggle watchdog reset, so watchdog in not running state.
|
|
*/
|
|
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
|
|
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
static int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned int mask = ~0;
|
|
|
|
if (argc < 2 || argc > 3)
|
|
return CMD_RET_USAGE;
|
|
|
|
argv++;
|
|
|
|
if (argc == 3)
|
|
mask = simple_strtoul(argv[1], NULL, 16);
|
|
|
|
switch (*argv[0]) {
|
|
case 'e': /* Enable */
|
|
do_bridge_reset(1, mask);
|
|
break;
|
|
case 'd': /* Disable */
|
|
do_bridge_reset(0, mask);
|
|
break;
|
|
default:
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(bridge, 3, 1, do_bridge,
|
|
"SoCFPGA HPS FPGA bridge control",
|
|
"enable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
|
|
"bridge disable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
|
|
""
|
|
);
|
|
|
|
#endif
|