mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 07:58:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
1837 lines
55 KiB
C
1837 lines
55 KiB
C
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "ddr3_init.h"
|
|
|
|
#define WL_ITERATION_NUM 10
|
|
#define ONE_CLOCK_ERROR_SHIFT 2
|
|
#define ALIGN_ERROR_SHIFT -2
|
|
|
|
static u32 pup_mask_table[] = {
|
|
0x000000ff,
|
|
0x0000ff00,
|
|
0x00ff0000,
|
|
0xff000000
|
|
};
|
|
|
|
static struct write_supp_result wr_supp_res[MAX_INTERFACE_NUM][MAX_BUS_NUM];
|
|
|
|
static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num);
|
|
static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num);
|
|
static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num);
|
|
static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id, u32 bus_id,
|
|
u32 bus_id_delta);
|
|
static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id,
|
|
u32 bus_id, u32 offset,
|
|
u32 bus_id_delta);
|
|
static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id,
|
|
u32 edge_offset, u32 bus_id_delta);
|
|
static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id,
|
|
u32 bus_id, u32 bus_id_delta);
|
|
|
|
u32 hws_ddr3_tip_max_cs_get(void)
|
|
{
|
|
u32 c_cs;
|
|
static u32 max_cs;
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
if (!max_cs) {
|
|
for (c_cs = 0; c_cs < NUM_OF_CS; c_cs++) {
|
|
VALIDATE_ACTIVE(tm->
|
|
interface_params[0].as_bus_params[0].
|
|
cs_bitmask, c_cs);
|
|
max_cs++;
|
|
}
|
|
}
|
|
|
|
return max_cs;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
Dynamic read leveling
|
|
******************************************************************************/
|
|
int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq)
|
|
{
|
|
u32 data, mask;
|
|
u32 max_cs = hws_ddr3_tip_max_cs_get();
|
|
u32 bus_num, if_id, cl_val;
|
|
enum hws_speed_bin speed_bin_index;
|
|
/* save current CS value */
|
|
u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 };
|
|
int is_any_pup_fail = 0;
|
|
u32 data_read[MAX_INTERFACE_NUM + 1] = { 0 };
|
|
u8 rl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM];
|
|
struct pattern_info *pattern_table = ddr3_tip_get_pattern_table();
|
|
u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
if (rl_version == 0) {
|
|
/* OLD RL machine */
|
|
data = 0x40;
|
|
data |= (1 << 20);
|
|
|
|
/* TBD multi CS */
|
|
CHECK_STATUS(ddr3_tip_if_write(
|
|
dev_num, ACCESS_TYPE_MULTICAST,
|
|
PARAM_NOT_CARE, TRAINING_REG,
|
|
data, 0x11ffff));
|
|
CHECK_STATUS(ddr3_tip_if_write(
|
|
dev_num, ACCESS_TYPE_MULTICAST,
|
|
PARAM_NOT_CARE,
|
|
TRAINING_PATTERN_BASE_ADDRESS_REG,
|
|
0, 0xfffffff8));
|
|
CHECK_STATUS(ddr3_tip_if_write(
|
|
dev_num, ACCESS_TYPE_MULTICAST,
|
|
PARAM_NOT_CARE, TRAINING_REG,
|
|
(u32)(1 << 31), (u32)(1 << 31)));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
training_result[training_stage][if_id] = TEST_SUCCESS;
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, 0,
|
|
(u32)(1 << 31), TRAINING_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("RL: DDR3 poll failed(1) IF %d\n",
|
|
if_id));
|
|
training_result[training_stage][if_id] =
|
|
TEST_FAILED;
|
|
|
|
if (debug_mode == 0)
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
/* read read-leveling result */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, data_read, 1 << 30));
|
|
/* exit read leveling mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x8, 0x9));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_1_REG, 1 << 16, 1 << 16));
|
|
|
|
/* disable RL machine all Trn_CS[3:0] , [16:0] */
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, 0, 0xf1ffff));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if ((data_read[if_id] & (1 << 30)) == 0) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("\n_read Leveling failed for IF %d\n",
|
|
if_id));
|
|
training_result[training_stage][if_id] =
|
|
TEST_FAILED;
|
|
if (debug_mode == 0)
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
return MV_OK;
|
|
}
|
|
|
|
/* NEW RL machine */
|
|
for (effective_cs = 0; effective_cs < NUM_OF_CS; effective_cs++)
|
|
for (bus_num = 0; bus_num < MAX_BUS_NUM; bus_num++)
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++)
|
|
rl_values[effective_cs][bus_num][if_id] = 0;
|
|
|
|
for (effective_cs = 0; effective_cs < max_cs; effective_cs++) {
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
training_result[training_stage][if_id] = TEST_SUCCESS;
|
|
|
|
/* save current cs enable reg val */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, cs_enable_reg_val,
|
|
MASK_ALL_BITS));
|
|
/* enable single cs */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, (1 << 3), (1 << 3)));
|
|
}
|
|
|
|
ddr3_tip_reset_fifo_ptr(dev_num);
|
|
|
|
/*
|
|
* Phase 1: Load pattern (using ODPG)
|
|
*
|
|
* enter Read Leveling mode
|
|
* only 27 bits are masked
|
|
* assuming non multi-CS configuration
|
|
* write to CS = 0 for the non multi CS configuration, note
|
|
* that the results shall be read back to the required CS !!!
|
|
*/
|
|
|
|
/* BUS count is 0 shifted 26 */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x3, 0x3));
|
|
CHECK_STATUS(ddr3_tip_configure_odpg
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0,
|
|
pattern_table[PATTERN_RL].num_of_phases_tx, 0,
|
|
pattern_table[PATTERN_RL].num_of_phases_rx, 0, 0,
|
|
effective_cs, STRESS_NONE, DURATION_SINGLE));
|
|
|
|
/* load pattern to ODPG */
|
|
ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST,
|
|
PARAM_NOT_CARE, PATTERN_RL,
|
|
pattern_table[PATTERN_RL].
|
|
start_addr);
|
|
|
|
/*
|
|
* Phase 2: ODPG to Read Leveling mode
|
|
*/
|
|
|
|
/* General Training Opcode register */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_WRITE_READ_MODE_ENABLE_REG, 0,
|
|
MASK_ALL_BITS));
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_CONTROL_REG,
|
|
(0x301b01 | effective_cs << 2), 0x3c3fef));
|
|
|
|
/* Object1 opcode register 0 & 1 */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
speed_bin_index =
|
|
tm->interface_params[if_id].speed_bin_index;
|
|
cl_val =
|
|
cas_latency_table[speed_bin_index].cl_val[freq];
|
|
data = (cl_val << 17) | (0x3 << 25);
|
|
mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
ODPG_OBJ1_OPCODE_REG, data, mask));
|
|
}
|
|
|
|
/* Set iteration count to max value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_OPCODE_1_REG, 0xd00, 0xd00));
|
|
|
|
/*
|
|
* Phase 2: Mask config
|
|
*/
|
|
|
|
ddr3_tip_dynamic_read_leveling_seq(dev_num);
|
|
|
|
/*
|
|
* Phase 3: Read Leveling execution
|
|
*/
|
|
|
|
/* temporary jira dunit=14751 */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_DBG_1_REG, 0, (u32)(1 << 31)));
|
|
/* configure phy reset value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_DBG_3_REG, (0x7f << 24),
|
|
(u32)(0xff << 24)));
|
|
/* data pup rd reset enable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
SDRAM_CONFIGURATION_REG, 0, (1 << 30)));
|
|
/* data pup rd reset disable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30)));
|
|
/* training SW override & training RL mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x1, 0x9));
|
|
/* training enable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, (1 << 24) | (1 << 20),
|
|
(1 << 24) | (1 << 20)));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31)));
|
|
|
|
/********* trigger training *******************/
|
|
/* Trigger, poll on status and disable ODPG */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_STATUS_REG, 0x1, 0x1));
|
|
|
|
/* check for training done + results pass */
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2,
|
|
ODPG_TRAINING_STATUS_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("Training Done Failed\n"));
|
|
return MV_FAIL;
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ODPG_TRAINING_TRIGGER_REG, data_read,
|
|
0x4));
|
|
data = data_read[if_id];
|
|
if (data != 0x0) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("Training Result Failed\n"));
|
|
}
|
|
}
|
|
|
|
/*disable ODPG - Back to functional mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS,
|
|
(0x1 << ODPG_DISABLE_OFFS)));
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1,
|
|
ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("ODPG disable failed "));
|
|
return MV_FAIL;
|
|
}
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS));
|
|
|
|
/* double loop on bus, pup */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* check training done */
|
|
is_any_pup_fail = 0;
|
|
for (bus_num = 0;
|
|
bus_num < tm->num_of_bus_per_interface;
|
|
bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_num);
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id, (1 << 25), (1 << 25),
|
|
mask_results_pup_reg_map[bus_num],
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("\n_r_l: DDR3 poll failed(2) for bus %d",
|
|
bus_num));
|
|
is_any_pup_fail = 1;
|
|
} else {
|
|
/* read result per pup */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
mask_results_pup_reg_map
|
|
[bus_num], data_read,
|
|
0xff));
|
|
rl_values[effective_cs][bus_num]
|
|
[if_id] = (u8)data_read[if_id];
|
|
}
|
|
}
|
|
|
|
if (is_any_pup_fail == 1) {
|
|
training_result[training_stage][if_id] =
|
|
TEST_FAILED;
|
|
if (debug_mode == 0)
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n"));
|
|
|
|
/*
|
|
* Phase 3: Exit Read Leveling
|
|
*/
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, (1 << 3), (1 << 3)));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_1_REG, (1 << 16), (1 << 16)));
|
|
/* set ODPG to functional */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS));
|
|
|
|
/*
|
|
* Copy the result from the effective CS search to the
|
|
* real Functional CS
|
|
*/
|
|
/*ddr3_tip_write_cs_result(dev_num, RL_PHY_REG); */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS));
|
|
}
|
|
|
|
for (effective_cs = 0; effective_cs < max_cs; effective_cs++) {
|
|
/* double loop on bus, pup */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_num = 0;
|
|
bus_num < tm->num_of_bus_per_interface;
|
|
bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_num);
|
|
/* read result per pup from arry */
|
|
data = rl_values[effective_cs][bus_num][if_id];
|
|
data = (data & 0x1f) |
|
|
(((data & 0xe0) >> 5) << 6);
|
|
ddr3_tip_bus_write(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ACCESS_TYPE_UNICAST,
|
|
bus_num, DDR_PHY_DATA,
|
|
RL_PHY_REG +
|
|
((effective_cs ==
|
|
0) ? 0x0 : 0x4), data);
|
|
}
|
|
}
|
|
}
|
|
/* Set to 0 after each loop to avoid illegal value may be used */
|
|
effective_cs = 0;
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* restore cs enable value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, cs_enable_reg_val[if_id],
|
|
MASK_ALL_BITS));
|
|
if (odt_config != 0) {
|
|
CHECK_STATUS(ddr3_tip_write_additional_odt_setting
|
|
(dev_num, if_id));
|
|
}
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (training_result[training_stage][if_id] == TEST_FAILED)
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Legacy Dynamic write leveling
|
|
*/
|
|
int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num)
|
|
{
|
|
u32 c_cs, if_id, cs_mask = 0;
|
|
u32 max_cs = hws_ddr3_tip_max_cs_get();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
/*
|
|
* In TRAINIUNG reg (0x15b0) write 0x80000008 | cs_mask:
|
|
* Trn_start
|
|
* cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training
|
|
* Trn_auto_seq = write leveling
|
|
*/
|
|
for (c_cs = 0; c_cs < max_cs; c_cs++)
|
|
cs_mask = cs_mask | 1 << (20 + c_cs);
|
|
|
|
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, 0,
|
|
TRAINING_REG, (0x80000008 | cs_mask),
|
|
0xffffffff));
|
|
mdelay(20);
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, 0,
|
|
(u32)0x80000000, TRAINING_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("polling failed for Old WL result\n"));
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Legacy Dynamic read leveling
|
|
*/
|
|
int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num)
|
|
{
|
|
u32 c_cs, if_id, cs_mask = 0;
|
|
u32 max_cs = hws_ddr3_tip_max_cs_get();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
/*
|
|
* In TRAINIUNG reg (0x15b0) write 0x80000040 | cs_mask:
|
|
* Trn_start
|
|
* cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training
|
|
* cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training
|
|
* Trn_auto_seq = Read Leveling using training pattern
|
|
*/
|
|
for (c_cs = 0; c_cs < max_cs; c_cs++)
|
|
cs_mask = cs_mask | 1 << (20 + c_cs);
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, 0, TRAINING_REG,
|
|
(0x80000040 | cs_mask), 0xffffffff));
|
|
mdelay(100);
|
|
|
|
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, 0,
|
|
(u32)0x80000000, TRAINING_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("polling failed for Old RL result\n"));
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic per bit read leveling
|
|
*/
|
|
int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 freq)
|
|
{
|
|
u32 data, mask;
|
|
u32 bus_num, if_id, cl_val, bit_num;
|
|
u32 curr_numb, curr_min_delay;
|
|
int adll_array[3] = { 0, -0xa, 0x14 };
|
|
u32 phyreg3_arr[MAX_INTERFACE_NUM][MAX_BUS_NUM];
|
|
enum hws_speed_bin speed_bin_index;
|
|
int is_any_pup_fail = 0;
|
|
int break_loop = 0;
|
|
u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; /* save current CS value */
|
|
u32 data_read[MAX_INTERFACE_NUM];
|
|
int per_bit_rl_pup_status[MAX_INTERFACE_NUM][MAX_BUS_NUM];
|
|
u32 data2_write[MAX_INTERFACE_NUM][MAX_BUS_NUM];
|
|
struct pattern_info *pattern_table = ddr3_tip_get_pattern_table();
|
|
u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_num = 0;
|
|
bus_num <= tm->num_of_bus_per_interface; bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_num);
|
|
per_bit_rl_pup_status[if_id][bus_num] = 0;
|
|
data2_write[if_id][bus_num] = 0;
|
|
/* read current value of phy register 0x3 */
|
|
CHECK_STATUS(ddr3_tip_bus_read
|
|
(dev_num, if_id, ACCESS_TYPE_UNICAST,
|
|
bus_num, DDR_PHY_DATA,
|
|
READ_CENTRALIZATION_PHY_REG,
|
|
&phyreg3_arr[if_id][bus_num]));
|
|
}
|
|
}
|
|
|
|
/* NEW RL machine */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
training_result[training_stage][if_id] = TEST_SUCCESS;
|
|
|
|
/* save current cs enable reg val */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, &cs_enable_reg_val[if_id],
|
|
MASK_ALL_BITS));
|
|
/* enable single cs */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, (1 << 3), (1 << 3)));
|
|
}
|
|
|
|
ddr3_tip_reset_fifo_ptr(dev_num);
|
|
for (curr_numb = 0; curr_numb < 3; curr_numb++) {
|
|
/*
|
|
* Phase 1: Load pattern (using ODPG)
|
|
*
|
|
* enter Read Leveling mode
|
|
* only 27 bits are masked
|
|
* assuming non multi-CS configuration
|
|
* write to CS = 0 for the non multi CS configuration, note that
|
|
* the results shall be read back to the required CS !!!
|
|
*/
|
|
|
|
/* BUS count is 0 shifted 26 */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x3, 0x3));
|
|
CHECK_STATUS(ddr3_tip_configure_odpg
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0,
|
|
pattern_table[PATTERN_TEST].num_of_phases_tx, 0,
|
|
pattern_table[PATTERN_TEST].num_of_phases_rx, 0,
|
|
0, 0, STRESS_NONE, DURATION_SINGLE));
|
|
|
|
/* load pattern to ODPG */
|
|
ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST,
|
|
PARAM_NOT_CARE, PATTERN_TEST,
|
|
pattern_table[PATTERN_TEST].
|
|
start_addr);
|
|
|
|
/*
|
|
* Phase 2: ODPG to Read Leveling mode
|
|
*/
|
|
|
|
/* General Training Opcode register */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_WRITE_READ_MODE_ENABLE_REG, 0,
|
|
MASK_ALL_BITS));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_CONTROL_REG, 0x301b01, 0x3c3fef));
|
|
|
|
/* Object1 opcode register 0 & 1 */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
speed_bin_index =
|
|
tm->interface_params[if_id].speed_bin_index;
|
|
cl_val =
|
|
cas_latency_table[speed_bin_index].cl_val[freq];
|
|
data = (cl_val << 17) | (0x3 << 25);
|
|
mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
ODPG_OBJ1_OPCODE_REG, data, mask));
|
|
}
|
|
|
|
/* Set iteration count to max value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_OPCODE_1_REG, 0xd00, 0xd00));
|
|
|
|
/*
|
|
* Phase 2: Mask config
|
|
*/
|
|
|
|
ddr3_tip_dynamic_per_bit_read_leveling_seq(dev_num);
|
|
|
|
/*
|
|
* Phase 3: Read Leveling execution
|
|
*/
|
|
|
|
/* temporary jira dunit=14751 */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_DBG_1_REG, 0, (u32)(1 << 31)));
|
|
/* configure phy reset value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_DBG_3_REG, (0x7f << 24),
|
|
(u32)(0xff << 24)));
|
|
/* data pup rd reset enable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
SDRAM_CONFIGURATION_REG, 0, (1 << 30)));
|
|
/* data pup rd reset disable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30)));
|
|
/* training SW override & training RL mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x1, 0x9));
|
|
/* training enable */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, (1 << 24) | (1 << 20),
|
|
(1 << 24) | (1 << 20)));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31)));
|
|
|
|
/********* trigger training *******************/
|
|
/* Trigger, poll on status and disable ODPG */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_STATUS_REG, 0x1, 0x1));
|
|
|
|
/*check for training done + results pass */
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2,
|
|
ODPG_TRAINING_STATUS_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("Training Done Failed\n"));
|
|
return MV_FAIL;
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ODPG_TRAINING_TRIGGER_REG, data_read,
|
|
0x4));
|
|
data = data_read[if_id];
|
|
if (data != 0x0) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("Training Result Failed\n"));
|
|
}
|
|
}
|
|
|
|
/*disable ODPG - Back to functional mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS,
|
|
(0x1 << ODPG_DISABLE_OFFS)));
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1,
|
|
ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("ODPG disable failed "));
|
|
return MV_FAIL;
|
|
}
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS));
|
|
|
|
/* double loop on bus, pup */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* check training done */
|
|
for (bus_num = 0;
|
|
bus_num < tm->num_of_bus_per_interface;
|
|
bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_num);
|
|
|
|
if (per_bit_rl_pup_status[if_id][bus_num]
|
|
== 0) {
|
|
curr_min_delay = 0;
|
|
for (bit_num = 0; bit_num < 8;
|
|
bit_num++) {
|
|
if (ddr3_tip_if_polling
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id, (1 << 25),
|
|
(1 << 25),
|
|
mask_results_dq_reg_map
|
|
[bus_num * 8 + bit_num],
|
|
MAX_POLLING_ITERATIONS) !=
|
|
MV_OK) {
|
|
DEBUG_LEVELING
|
|
(DEBUG_LEVEL_ERROR,
|
|
("\n_r_l: DDR3 poll failed(2) for bus %d bit %d\n",
|
|
bus_num,
|
|
bit_num));
|
|
} else {
|
|
/* read result per pup */
|
|
CHECK_STATUS
|
|
(ddr3_tip_if_read
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
mask_results_dq_reg_map
|
|
[bus_num * 8 +
|
|
bit_num],
|
|
data_read,
|
|
MASK_ALL_BITS));
|
|
data =
|
|
(data_read
|
|
[if_id] &
|
|
0x1f) |
|
|
((data_read
|
|
[if_id] &
|
|
0xe0) << 1);
|
|
if (curr_min_delay == 0)
|
|
curr_min_delay =
|
|
data;
|
|
else if (data <
|
|
curr_min_delay)
|
|
curr_min_delay =
|
|
data;
|
|
if (data > data2_write[if_id][bus_num])
|
|
data2_write
|
|
[if_id]
|
|
[bus_num] =
|
|
data;
|
|
}
|
|
}
|
|
|
|
if (data2_write[if_id][bus_num] <=
|
|
(curr_min_delay +
|
|
MAX_DQ_READ_LEVELING_DELAY)) {
|
|
per_bit_rl_pup_status[if_id]
|
|
[bus_num] = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* check if there is need to search new phyreg3 value */
|
|
if (curr_numb < 2) {
|
|
/* if there is DLL that is not checked yet */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1;
|
|
if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_num = 0;
|
|
bus_num < tm->num_of_bus_per_interface;
|
|
bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask,
|
|
bus_num);
|
|
if (per_bit_rl_pup_status[if_id]
|
|
[bus_num] != 1) {
|
|
/* go to next ADLL value */
|
|
CHECK_STATUS
|
|
(ddr3_tip_bus_write
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ACCESS_TYPE_UNICAST,
|
|
bus_num, DDR_PHY_DATA,
|
|
READ_CENTRALIZATION_PHY_REG,
|
|
(phyreg3_arr[if_id]
|
|
[bus_num] +
|
|
adll_array[curr_numb])));
|
|
break_loop = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (break_loop)
|
|
break;
|
|
}
|
|
} /* if (curr_numb < 2) */
|
|
if (!break_loop)
|
|
break;
|
|
} /* for ( curr_numb = 0; curr_numb <3; curr_numb++) */
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_num = 0; bus_num < tm->num_of_bus_per_interface;
|
|
bus_num++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_num);
|
|
if (per_bit_rl_pup_status[if_id][bus_num] == 1)
|
|
ddr3_tip_bus_write(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ACCESS_TYPE_UNICAST,
|
|
bus_num, DDR_PHY_DATA,
|
|
RL_PHY_REG +
|
|
CS_REG_VALUE(effective_cs),
|
|
data2_write[if_id]
|
|
[bus_num]);
|
|
else
|
|
is_any_pup_fail = 1;
|
|
}
|
|
|
|
/* TBD flow does not support multi CS */
|
|
/*
|
|
* cs_bitmask = tm->interface_params[if_id].
|
|
* as_bus_params[bus_num].cs_bitmask;
|
|
*/
|
|
/* divide by 4 is used for retrieving the CS number */
|
|
/*
|
|
* TBD BC2 - what is the PHY address for other
|
|
* CS ddr3_tip_write_cs_result() ???
|
|
*/
|
|
/*
|
|
* find what should be written to PHY
|
|
* - max delay that is less than threshold
|
|
*/
|
|
if (is_any_pup_fail == 1) {
|
|
training_result[training_stage][if_id] = TEST_FAILED;
|
|
if (debug_mode == 0)
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n"));
|
|
|
|
/*
|
|
* Phase 3: Exit Read Leveling
|
|
*/
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, (1 << 3), (1 << 3)));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_1_REG, (1 << 16), (1 << 16)));
|
|
/* set ODPG to functional */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS));
|
|
/*
|
|
* Copy the result from the effective CS search to the real
|
|
* Functional CS
|
|
*/
|
|
ddr3_tip_write_cs_result(dev_num, RL_PHY_REG);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* restore cs enable value */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, cs_enable_reg_val[if_id],
|
|
MASK_ALL_BITS));
|
|
if (odt_config != 0) {
|
|
CHECK_STATUS(ddr3_tip_write_additional_odt_setting
|
|
(dev_num, if_id));
|
|
}
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (training_result[training_stage][if_id] == TEST_FAILED)
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
int ddr3_tip_calc_cs_mask(u32 dev_num, u32 if_id, u32 effective_cs,
|
|
u32 *cs_mask)
|
|
{
|
|
u32 all_bus_cs = 0, same_bus_cs;
|
|
u32 bus_cnt;
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
*cs_mask = same_bus_cs = CS_BIT_MASK;
|
|
|
|
/*
|
|
* In some of the devices (such as BC2), the CS is per pup and there
|
|
* for mixed mode is valid on like other devices where CS configuration
|
|
* is per interface.
|
|
* In order to know that, we do 'Or' and 'And' operation between all
|
|
* CS (of the pups).
|
|
* If they are they are not the same then it's mixed mode so all CS
|
|
* should be configured (when configuring the MRS)
|
|
*/
|
|
for (bus_cnt = 0; bus_cnt < tm->num_of_bus_per_interface; bus_cnt++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt);
|
|
|
|
all_bus_cs |= tm->interface_params[if_id].
|
|
as_bus_params[bus_cnt].cs_bitmask;
|
|
same_bus_cs &= tm->interface_params[if_id].
|
|
as_bus_params[bus_cnt].cs_bitmask;
|
|
|
|
/* cs enable is active low */
|
|
*cs_mask &= ~tm->interface_params[if_id].
|
|
as_bus_params[bus_cnt].cs_bitmask;
|
|
}
|
|
|
|
if (all_bus_cs == same_bus_cs)
|
|
*cs_mask = (*cs_mask | (~(1 << effective_cs))) & CS_BIT_MASK;
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic write leveling
|
|
*/
|
|
int ddr3_tip_dynamic_write_leveling(u32 dev_num)
|
|
{
|
|
u32 reg_data = 0, iter, if_id, bus_cnt;
|
|
u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 };
|
|
u32 cs_mask[MAX_INTERFACE_NUM];
|
|
u32 read_data_sample_delay_vals[MAX_INTERFACE_NUM] = { 0 };
|
|
u32 read_data_ready_delay_vals[MAX_INTERFACE_NUM] = { 0 };
|
|
/* 0 for failure */
|
|
u32 res_values[MAX_INTERFACE_NUM * MAX_BUS_NUM] = { 0 };
|
|
u32 test_res = 0; /* 0 - success for all pup */
|
|
u32 data_read[MAX_INTERFACE_NUM];
|
|
u8 wl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM];
|
|
u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map();
|
|
u32 cs_mask0[MAX_INTERFACE_NUM] = { 0 };
|
|
u32 max_cs = hws_ddr3_tip_max_cs_get();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
|
|
training_result[training_stage][if_id] = TEST_SUCCESS;
|
|
|
|
/* save Read Data Sample Delay */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
READ_DATA_SAMPLE_DELAY,
|
|
read_data_sample_delay_vals, MASK_ALL_BITS));
|
|
/* save Read Data Ready Delay */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
READ_DATA_READY_DELAY, read_data_ready_delay_vals,
|
|
MASK_ALL_BITS));
|
|
/* save current cs reg val */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, cs_enable_reg_val, MASK_ALL_BITS));
|
|
}
|
|
|
|
/*
|
|
* Phase 1: DRAM 2 Write Leveling mode
|
|
*/
|
|
|
|
/*Assert 10 refresh commands to DRAM to all CS */
|
|
for (iter = 0; iter < WL_ITERATION_NUM; iter++) {
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id, SDRAM_OPERATION_REG,
|
|
(u32)((~(0xf) << 8) | 0x2), 0xf1f));
|
|
}
|
|
}
|
|
/* check controller back to normal */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f,
|
|
SDRAM_OPERATION_REG, MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("WL: DDR3 poll failed(3)"));
|
|
}
|
|
}
|
|
|
|
for (effective_cs = 0; effective_cs < max_cs; effective_cs++) {
|
|
/*enable write leveling to all cs - Q off , WL n */
|
|
/* calculate interface cs mask */
|
|
CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD,
|
|
0x1000, 0x1080));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* cs enable is active low */
|
|
ddr3_tip_calc_cs_mask(dev_num, if_id, effective_cs,
|
|
&cs_mask[if_id]);
|
|
}
|
|
|
|
/* Enable Output buffer to relevant CS - Q on , WL on */
|
|
CHECK_STATUS(ddr3_tip_write_mrs_cmd
|
|
(dev_num, cs_mask, MRS1_CMD, 0x80, 0x1080));
|
|
|
|
/*enable odt for relevant CS */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
0x1498, (0x3 << (effective_cs * 2)), 0xf));
|
|
|
|
/*
|
|
* Phase 2: Set training IP to write leveling mode
|
|
*/
|
|
|
|
CHECK_STATUS(ddr3_tip_dynamic_write_leveling_seq(dev_num));
|
|
|
|
/*
|
|
* Phase 3: Trigger training
|
|
*/
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1));
|
|
|
|
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
|
|
/* training done */
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
(1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL: DDR3 poll (4) failed (Data: 0x%x)\n",
|
|
reg_data));
|
|
}
|
|
#if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */
|
|
else {
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ODPG_TRAINING_TRIGGER_REG,
|
|
®_data, (1 << 2)));
|
|
if (reg_data != 0) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL: WL failed IF %d reg_data=0x%x\n",
|
|
if_id, reg_data));
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* training done */
|
|
if (ddr3_tip_if_polling
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
(1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG,
|
|
MAX_POLLING_ITERATIONS) != MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL: DDR3 poll (4) failed (Data: 0x%x)\n",
|
|
reg_data));
|
|
} else {
|
|
#if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ODPG_TRAINING_STATUS_REG,
|
|
data_read, (1 << 2)));
|
|
reg_data = data_read[if_id];
|
|
if (reg_data != 0) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL: WL failed IF %d reg_data=0x%x\n",
|
|
if_id, reg_data));
|
|
}
|
|
#endif
|
|
|
|
/* check for training completion per bus */
|
|
for (bus_cnt = 0;
|
|
bus_cnt < tm->num_of_bus_per_interface;
|
|
bus_cnt++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask,
|
|
bus_cnt);
|
|
/* training status */
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
mask_results_pup_reg_map
|
|
[bus_cnt], data_read,
|
|
(1 << 25)));
|
|
reg_data = data_read[if_id];
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL: IF %d BUS %d reg 0x%x\n",
|
|
if_id, bus_cnt, reg_data));
|
|
if (reg_data == 0) {
|
|
res_values[
|
|
(if_id *
|
|
tm->num_of_bus_per_interface)
|
|
+ bus_cnt] = 1;
|
|
}
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
mask_results_pup_reg_map
|
|
[bus_cnt], data_read,
|
|
0xff));
|
|
/*
|
|
* Save the read value that should be
|
|
* write to PHY register
|
|
*/
|
|
wl_values[effective_cs]
|
|
[bus_cnt][if_id] =
|
|
(u8)data_read[if_id];
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Phase 4: Exit write leveling mode
|
|
*/
|
|
|
|
/* disable DQs toggling */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
WR_LEVELING_DQS_PATTERN_REG, 0x0, 0x1));
|
|
|
|
/* Update MRS 1 (WL off) */
|
|
CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD,
|
|
0x1000, 0x1080));
|
|
|
|
/* Update MRS 1 (return to functional mode - Q on , WL off) */
|
|
CHECK_STATUS(ddr3_tip_write_mrs_cmd
|
|
(dev_num, cs_mask0, MRS1_CMD, 0x0, 0x1080));
|
|
|
|
/* set phy to normal mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x5, 0x7));
|
|
|
|
/* exit sw override mode */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x4, 0x7));
|
|
}
|
|
|
|
/*
|
|
* Phase 5: Load WL values to each PHY
|
|
*/
|
|
|
|
for (effective_cs = 0; effective_cs < max_cs; effective_cs++) {
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
test_res = 0;
|
|
for (bus_cnt = 0;
|
|
bus_cnt < tm->num_of_bus_per_interface;
|
|
bus_cnt++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt);
|
|
/* check if result == pass */
|
|
if (res_values
|
|
[(if_id *
|
|
tm->num_of_bus_per_interface) +
|
|
bus_cnt] == 0) {
|
|
/*
|
|
* read result control register
|
|
* according to pup
|
|
*/
|
|
reg_data =
|
|
wl_values[effective_cs][bus_cnt]
|
|
[if_id];
|
|
/*
|
|
* Write into write leveling register
|
|
* ([4:0] ADLL, [8:6] Phase, [15:10]
|
|
* (centralization) ADLL + 0x10)
|
|
*/
|
|
reg_data =
|
|
(reg_data & 0x1f) |
|
|
(((reg_data & 0xe0) >> 5) << 6) |
|
|
(((reg_data & 0x1f) +
|
|
phy_reg1_val) << 10);
|
|
ddr3_tip_bus_write(
|
|
dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
ACCESS_TYPE_UNICAST,
|
|
bus_cnt,
|
|
DDR_PHY_DATA,
|
|
WL_PHY_REG +
|
|
effective_cs *
|
|
CS_REGISTER_ADDR_OFFSET,
|
|
reg_data);
|
|
} else {
|
|
test_res = 1;
|
|
/*
|
|
* read result control register
|
|
* according to pup
|
|
*/
|
|
CHECK_STATUS(ddr3_tip_if_read
|
|
(dev_num,
|
|
ACCESS_TYPE_UNICAST,
|
|
if_id,
|
|
mask_results_pup_reg_map
|
|
[bus_cnt], data_read,
|
|
0xff));
|
|
reg_data = data_read[if_id];
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL: IF %d BUS %d failed, reg 0x%x\n",
|
|
if_id, bus_cnt, reg_data));
|
|
}
|
|
}
|
|
|
|
if (test_res != 0) {
|
|
training_result[training_stage][if_id] =
|
|
TEST_FAILED;
|
|
}
|
|
}
|
|
}
|
|
/* Set to 0 after each loop to avoid illegal value may be used */
|
|
effective_cs = 0;
|
|
|
|
/*
|
|
* Copy the result from the effective CS search to the real
|
|
* Functional CS
|
|
*/
|
|
/* ddr3_tip_write_cs_result(dev_num, WL_PHY_REG); */
|
|
/* restore saved values */
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
/* restore Read Data Sample Delay */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
READ_DATA_SAMPLE_DELAY,
|
|
read_data_sample_delay_vals[if_id],
|
|
MASK_ALL_BITS));
|
|
|
|
/* restore Read Data Ready Delay */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
READ_DATA_READY_DELAY,
|
|
read_data_ready_delay_vals[if_id],
|
|
MASK_ALL_BITS));
|
|
|
|
/* enable multi cs */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
CS_ENABLE_REG, cs_enable_reg_val[if_id],
|
|
MASK_ALL_BITS));
|
|
}
|
|
|
|
/* Disable modt0 for CS0 training - need to adjust for multy CS */
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x1498,
|
|
0x0, 0xf));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (training_result[training_stage][if_id] == TEST_FAILED)
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic write leveling supplementary
|
|
*/
|
|
int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num)
|
|
{
|
|
int adll_offset;
|
|
u32 if_id, bus_id, data, data_tmp;
|
|
int is_if_fail = 0;
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
is_if_fail = 0;
|
|
|
|
for (bus_id = 0; bus_id < GET_TOPOLOGY_NUM_OF_BUSES();
|
|
bus_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_id);
|
|
wr_supp_res[if_id][bus_id].is_pup_fail = 1;
|
|
CHECK_STATUS(ddr3_tip_bus_read
|
|
(dev_num, if_id, ACCESS_TYPE_UNICAST,
|
|
bus_id, DDR_PHY_DATA,
|
|
WRITE_CENTRALIZATION_PHY_REG +
|
|
effective_cs * CS_REGISTER_ADDR_OFFSET,
|
|
&data));
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: adll_offset=0 data delay = %d\n",
|
|
data));
|
|
if (ddr3_tip_wl_supp_align_phase_shift
|
|
(dev_num, if_id, bus_id, 0, 0) == MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: IF %d bus_id %d adll_offset=0 Success !\n",
|
|
if_id, bus_id));
|
|
continue;
|
|
}
|
|
|
|
/* change adll */
|
|
adll_offset = 5;
|
|
CHECK_STATUS(ddr3_tip_bus_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA,
|
|
WRITE_CENTRALIZATION_PHY_REG +
|
|
effective_cs * CS_REGISTER_ADDR_OFFSET,
|
|
data + adll_offset));
|
|
CHECK_STATUS(ddr3_tip_bus_read
|
|
(dev_num, if_id, ACCESS_TYPE_UNICAST,
|
|
bus_id, DDR_PHY_DATA,
|
|
WRITE_CENTRALIZATION_PHY_REG +
|
|
effective_cs * CS_REGISTER_ADDR_OFFSET,
|
|
&data_tmp));
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: adll_offset= %d data delay = %d\n",
|
|
adll_offset, data_tmp));
|
|
|
|
if (ddr3_tip_wl_supp_align_phase_shift
|
|
(dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n",
|
|
if_id, bus_id, adll_offset));
|
|
continue;
|
|
}
|
|
|
|
/* change adll */
|
|
adll_offset = -5;
|
|
CHECK_STATUS(ddr3_tip_bus_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA,
|
|
WRITE_CENTRALIZATION_PHY_REG +
|
|
effective_cs * CS_REGISTER_ADDR_OFFSET,
|
|
data + adll_offset));
|
|
CHECK_STATUS(ddr3_tip_bus_read
|
|
(dev_num, if_id, ACCESS_TYPE_UNICAST,
|
|
bus_id, DDR_PHY_DATA,
|
|
WRITE_CENTRALIZATION_PHY_REG +
|
|
effective_cs * CS_REGISTER_ADDR_OFFSET,
|
|
&data_tmp));
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: adll_offset= %d data delay = %d\n",
|
|
adll_offset, data_tmp));
|
|
if (ddr3_tip_wl_supp_align_phase_shift
|
|
(dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n",
|
|
if_id, bus_id, adll_offset));
|
|
continue;
|
|
} else {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_ERROR,
|
|
("WL Supp: IF %d bus_id %d Failed !\n",
|
|
if_id, bus_id));
|
|
is_if_fail = 1;
|
|
}
|
|
}
|
|
DEBUG_LEVELING(DEBUG_LEVEL_TRACE,
|
|
("WL Supp: IF %d bus_id %d is_pup_fail %d\n",
|
|
if_id, bus_id, is_if_fail));
|
|
|
|
if (is_if_fail == 1) {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("WL Supp: IF %d failed\n", if_id));
|
|
training_result[training_stage][if_id] = TEST_FAILED;
|
|
} else {
|
|
training_result[training_stage][if_id] = TEST_SUCCESS;
|
|
}
|
|
}
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
if (training_result[training_stage][if_id] == TEST_FAILED)
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Phase Shift
|
|
*/
|
|
static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id,
|
|
u32 bus_id, u32 offset,
|
|
u32 bus_id_delta)
|
|
{
|
|
wr_supp_res[if_id][bus_id].stage = PHASE_SHIFT;
|
|
if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id,
|
|
0, bus_id_delta) == MV_OK) {
|
|
wr_supp_res[if_id][bus_id].is_pup_fail = 0;
|
|
return MV_OK;
|
|
} else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id,
|
|
ONE_CLOCK_ERROR_SHIFT,
|
|
bus_id_delta) == MV_OK) {
|
|
/* 1 clock error */
|
|
wr_supp_res[if_id][bus_id].stage = CLOCK_SHIFT;
|
|
DEBUG_LEVELING(DEBUG_LEVEL_TRACE,
|
|
("Supp: 1 error clock for if %d pup %d with ofsset %d success\n",
|
|
if_id, bus_id, offset));
|
|
ddr3_tip_wl_supp_one_clk_err_shift(dev_num, if_id, bus_id, 0);
|
|
wr_supp_res[if_id][bus_id].is_pup_fail = 0;
|
|
return MV_OK;
|
|
} else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id,
|
|
ALIGN_ERROR_SHIFT,
|
|
bus_id_delta) == MV_OK) {
|
|
/* align error */
|
|
DEBUG_LEVELING(DEBUG_LEVEL_TRACE,
|
|
("Supp: align error for if %d pup %d with ofsset %d success\n",
|
|
if_id, bus_id, offset));
|
|
wr_supp_res[if_id][bus_id].stage = ALIGN_SHIFT;
|
|
ddr3_tip_wl_supp_align_err_shift(dev_num, if_id, bus_id, 0);
|
|
wr_supp_res[if_id][bus_id].is_pup_fail = 0;
|
|
return MV_OK;
|
|
} else {
|
|
wr_supp_res[if_id][bus_id].is_pup_fail = 1;
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Compare Test
|
|
*/
|
|
static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id,
|
|
u32 edge_offset, u32 bus_id_delta)
|
|
{
|
|
u32 num_of_succ_byte_compare, word_in_pattern, abs_offset;
|
|
u32 word_offset, i;
|
|
u32 read_pattern[TEST_PATTERN_LENGTH * 2];
|
|
struct pattern_info *pattern_table = ddr3_tip_get_pattern_table();
|
|
u32 pattern_test_pattern_table[8];
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
pattern_test_pattern_table[i] =
|
|
pattern_table_get_word(dev_num, PATTERN_TEST, (u8)i);
|
|
}
|
|
|
|
/* extern write, than read and compare */
|
|
CHECK_STATUS(ddr3_tip_ext_write
|
|
(dev_num, if_id,
|
|
(pattern_table[PATTERN_TEST].start_addr +
|
|
((SDRAM_CS_SIZE + 1) * effective_cs)), 1,
|
|
pattern_test_pattern_table));
|
|
|
|
CHECK_STATUS(ddr3_tip_reset_fifo_ptr(dev_num));
|
|
|
|
CHECK_STATUS(ddr3_tip_ext_read
|
|
(dev_num, if_id,
|
|
(pattern_table[PATTERN_TEST].start_addr +
|
|
((SDRAM_CS_SIZE + 1) * effective_cs)), 1, read_pattern));
|
|
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: IF %d bus_id %d 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
if_id, bus_id, read_pattern[0], read_pattern[1],
|
|
read_pattern[2], read_pattern[3], read_pattern[4],
|
|
read_pattern[5], read_pattern[6], read_pattern[7]));
|
|
|
|
/* compare byte per pup */
|
|
num_of_succ_byte_compare = 0;
|
|
for (word_in_pattern = start_xsb_offset;
|
|
word_in_pattern < (TEST_PATTERN_LENGTH * 2); word_in_pattern++) {
|
|
word_offset = word_in_pattern + edge_offset;
|
|
if ((word_offset > (TEST_PATTERN_LENGTH * 2 - 1)) ||
|
|
(word_offset < 0))
|
|
continue;
|
|
|
|
if ((read_pattern[word_in_pattern] & pup_mask_table[bus_id]) ==
|
|
(pattern_test_pattern_table[word_offset] &
|
|
pup_mask_table[bus_id]))
|
|
num_of_succ_byte_compare++;
|
|
}
|
|
|
|
abs_offset = (edge_offset > 0) ? edge_offset : -edge_offset;
|
|
if (num_of_succ_byte_compare == ((TEST_PATTERN_LENGTH * 2) -
|
|
abs_offset - start_xsb_offset)) {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Success\n",
|
|
if_id, bus_id, num_of_succ_byte_compare));
|
|
return MV_OK;
|
|
} else {
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n",
|
|
if_id, bus_id, num_of_succ_byte_compare));
|
|
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: expected 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
pattern_test_pattern_table[0],
|
|
pattern_test_pattern_table[1],
|
|
pattern_test_pattern_table[2],
|
|
pattern_test_pattern_table[3],
|
|
pattern_test_pattern_table[4],
|
|
pattern_test_pattern_table[5],
|
|
pattern_test_pattern_table[6],
|
|
pattern_test_pattern_table[7]));
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: recieved 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
read_pattern[0], read_pattern[1],
|
|
read_pattern[2], read_pattern[3],
|
|
read_pattern[4], read_pattern[5],
|
|
read_pattern[6], read_pattern[7]));
|
|
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n",
|
|
if_id, bus_id, num_of_succ_byte_compare));
|
|
|
|
return MV_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clock error shift - function moves the write leveling delay 1cc forward
|
|
*/
|
|
static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id,
|
|
u32 bus_id, u32 bus_id_delta)
|
|
{
|
|
int phase, adll;
|
|
u32 data;
|
|
DEBUG_LEVELING(DEBUG_LEVEL_TRACE, ("One_clk_err_shift\n"));
|
|
|
|
CHECK_STATUS(ddr3_tip_bus_read
|
|
(dev_num, if_id, ACCESS_TYPE_UNICAST, bus_id,
|
|
DDR_PHY_DATA, WL_PHY_REG, &data));
|
|
phase = ((data >> 6) & 0x7);
|
|
adll = data & 0x1f;
|
|
DEBUG_LEVELING(DEBUG_LEVEL_TRACE,
|
|
("One_clk_err_shift: IF %d bus_id %d phase %d adll %d\n",
|
|
if_id, bus_id, phase, adll));
|
|
|
|
if ((phase == 0) || (phase == 1)) {
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id,
|
|
DDR_PHY_DATA, 0, (phase + 2), 0x1f));
|
|
} else if (phase == 2) {
|
|
if (adll < 6) {
|
|
data = (3 << 6) + (0x1f);
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
bus_id, DDR_PHY_DATA, 0, data,
|
|
(0x7 << 6 | 0x1f)));
|
|
data = 0x2f;
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id,
|
|
bus_id, DDR_PHY_DATA, 1, data, 0x3f));
|
|
}
|
|
} else {
|
|
/* phase 3 */
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Align error shift
|
|
*/
|
|
static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id,
|
|
u32 bus_id, u32 bus_id_delta)
|
|
{
|
|
int phase, adll;
|
|
u32 data;
|
|
|
|
/* Shift WL result 1 phase back */
|
|
CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST,
|
|
bus_id, DDR_PHY_DATA, WL_PHY_REG,
|
|
&data));
|
|
phase = ((data >> 6) & 0x7);
|
|
adll = data & 0x1f;
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_TRACE,
|
|
("Wl_supp_align_err_shift: IF %d bus_id %d phase %d adll %d\n",
|
|
if_id, bus_id, phase, adll));
|
|
|
|
if (phase < 2) {
|
|
if (adll > 0x1a) {
|
|
if (phase == 0)
|
|
return MV_FAIL;
|
|
|
|
if (phase == 1) {
|
|
data = 0;
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id, bus_id, DDR_PHY_DATA,
|
|
0, data, (0x7 << 6 | 0x1f)));
|
|
data = 0xf;
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST,
|
|
if_id, bus_id, DDR_PHY_DATA,
|
|
1, data, 0x1f));
|
|
return MV_OK;
|
|
}
|
|
} else {
|
|
return MV_FAIL;
|
|
}
|
|
} else if ((phase == 2) || (phase == 3)) {
|
|
phase = phase - 2;
|
|
data = (phase << 6) + (adll & 0x1f);
|
|
CHECK_STATUS(ddr3_tip_bus_read_modify_write
|
|
(dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id,
|
|
DDR_PHY_DATA, 0, data, (0x7 << 6 | 0x1f)));
|
|
return MV_OK;
|
|
} else {
|
|
DEBUG_LEVELING(DEBUG_LEVEL_ERROR,
|
|
("Wl_supp_align_err_shift: unexpected phase\n"));
|
|
|
|
return MV_FAIL;
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic write leveling sequence
|
|
*/
|
|
static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num)
|
|
{
|
|
u32 bus_id, dq_id;
|
|
u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map();
|
|
u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_SW_2_REG, 0x1, 0x5));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_WRITE_LEVELING_REG, 0x50, 0xff));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_WRITE_LEVELING_REG, 0x5c, 0xff));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_TRAINING_CONTROL_REG, 0x381b82, 0x3c3faf));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_OBJ1_OPCODE_REG, (0x3 << 25), (0x3ffff << 9)));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_OBJ1_ITER_CNT_REG, 0x80, 0xffff));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
ODPG_WRITE_LEVELING_DONE_CNTR_REG, 0x14, 0xff));
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
TRAINING_WRITE_LEVELING_REG, 0xff5c, 0xffff));
|
|
|
|
/* mask PBS */
|
|
for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_dq_reg_map[dq_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Mask all results */
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_pup_reg_map[bus_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Unmask only wanted */
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_id);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_pup_reg_map[bus_id], 0, 0x1 << 24));
|
|
}
|
|
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
WR_LEVELING_DQS_PATTERN_REG, 0x1, 0x1));
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic read leveling sequence
|
|
*/
|
|
static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num)
|
|
{
|
|
u32 bus_id, dq_id;
|
|
u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map();
|
|
u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
/* mask PBS */
|
|
for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_dq_reg_map[dq_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Mask all results */
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_pup_reg_map[bus_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Unmask only wanted */
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_id);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_pup_reg_map[bus_id], 0, 0x1 << 24));
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Dynamic read leveling sequence
|
|
*/
|
|
static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num)
|
|
{
|
|
u32 bus_id, dq_id;
|
|
u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map();
|
|
u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg();
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
/* mask PBS */
|
|
for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_dq_reg_map[dq_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Mask all results */
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) {
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_pup_reg_map[bus_id], 0x1 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
/* Unmask only wanted */
|
|
for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, dq_id / 8);
|
|
CHECK_STATUS(ddr3_tip_if_write
|
|
(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE,
|
|
mask_results_dq_reg_map[dq_id], 0x0 << 24,
|
|
0x1 << 24));
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* Print write leveling supplementary results
|
|
*/
|
|
int ddr3_tip_print_wl_supp_result(u32 dev_num)
|
|
{
|
|
u32 bus_id = 0, if_id = 0;
|
|
struct hws_topology_map *tm = ddr3_get_topology_map();
|
|
|
|
DEBUG_LEVELING(DEBUG_LEVEL_INFO,
|
|
("I/F0 PUP0 Result[0 - success, 1-fail] ...\n"));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface;
|
|
bus_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_id);
|
|
DEBUG_LEVELING(DEBUG_LEVEL_INFO,
|
|
("%d ,", wr_supp_res[if_id]
|
|
[bus_id].is_pup_fail));
|
|
}
|
|
}
|
|
DEBUG_LEVELING(
|
|
DEBUG_LEVEL_INFO,
|
|
("I/F0 PUP0 Stage[0-phase_shift, 1-clock_shift, 2-align_shift] ...\n"));
|
|
|
|
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
|
|
VALIDATE_ACTIVE(tm->if_act_mask, if_id);
|
|
for (bus_id = 0; bus_id < tm->num_of_bus_per_interface;
|
|
bus_id++) {
|
|
VALIDATE_ACTIVE(tm->bus_act_mask, bus_id);
|
|
DEBUG_LEVELING(DEBUG_LEVEL_INFO,
|
|
("%d ,", wr_supp_res[if_id]
|
|
[bus_id].stage));
|
|
}
|
|
}
|
|
|
|
return MV_OK;
|
|
}
|