u-boot-brain/arch/arm/mach-tegra/cboot.c
Simon Glass db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00

622 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016-2018, NVIDIA CORPORATION.
*/
#include <common.h>
#include <env.h>
#include <fdt_support.h>
#include <fdtdec.h>
#include <hang.h>
#include <stdlib.h>
#include <string.h>
#include <linux/ctype.h>
#include <linux/sizes.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/cboot.h>
#include <asm/armv8/mmu.h>
/*
* Size of a region that's large enough to hold the relocated U-Boot and all
* other allocations made around it (stack, heap, page tables, etc.)
* In practice, running "bdinfo" at the shell prompt, the stack reaches about
* 5MB from the address selected for ram_top as of the time of writing,
* so a 16MB region should be plenty.
*/
#define MIN_USABLE_RAM_SIZE SZ_16M
/*
* The amount of space we expect to require for stack usage. Used to validate
* that all reservations fit into the region selected for the relocation target
*/
#define MIN_USABLE_STACK_SIZE SZ_1M
DECLARE_GLOBAL_DATA_PTR;
extern struct mm_region tegra_mem_map[];
/*
* These variables are written to before relocation, and hence cannot be
* in.bss, since .bss overlaps the DTB that's appended to the U-Boot binary.
* The section attribute forces this into .data and avoids this issue. This
* also has the nice side-effect of the content being valid after relocation.
*/
/* The number of valid entries in ram_banks[] */
static int ram_bank_count __attribute__((section(".data")));
/*
* The usable top-of-RAM for U-Boot. This is both:
* a) Below 4GB to avoid issues with peripherals that use 32-bit addressing.
* b) At the end of a region that has enough space to hold the relocated U-Boot
* and all other allocations made around it (stack, heap, page tables, etc.)
*/
static u64 ram_top __attribute__((section(".data")));
/* The base address of the region of RAM that ends at ram_top */
static u64 region_base __attribute__((section(".data")));
/*
* Explicitly put this in the .data section because it is written before the
* .bss section is zeroed out but it needs to persist.
*/
unsigned long cboot_boot_x0 __attribute__((section(".data")));
void cboot_save_boot_params(unsigned long x0, unsigned long x1,
unsigned long x2, unsigned long x3)
{
cboot_boot_x0 = x0;
}
int cboot_dram_init(void)
{
unsigned int na, ns;
const void *cboot_blob = (void *)cboot_boot_x0;
int node, len, i;
const u32 *prop;
if (!cboot_blob)
return -EINVAL;
na = fdtdec_get_uint(cboot_blob, 0, "#address-cells", 2);
ns = fdtdec_get_uint(cboot_blob, 0, "#size-cells", 2);
node = fdt_path_offset(cboot_blob, "/memory");
if (node < 0) {
pr_err("Can't find /memory node in cboot DTB");
hang();
}
prop = fdt_getprop(cboot_blob, node, "reg", &len);
if (!prop) {
pr_err("Can't find /memory/reg property in cboot DTB");
hang();
}
/* Calculate the true # of base/size pairs to read */
len /= 4; /* Convert bytes to number of cells */
len /= (na + ns); /* Convert cells to number of banks */
if (len > CONFIG_NR_DRAM_BANKS)
len = CONFIG_NR_DRAM_BANKS;
/* Parse the /memory node, and save useful entries */
gd->ram_size = 0;
ram_bank_count = 0;
for (i = 0; i < len; i++) {
u64 bank_start, bank_end, bank_size, usable_bank_size;
/* Extract raw memory region data from DTB */
bank_start = fdt_read_number(prop, na);
prop += na;
bank_size = fdt_read_number(prop, ns);
prop += ns;
gd->ram_size += bank_size;
bank_end = bank_start + bank_size;
debug("Bank %d: %llx..%llx (+%llx)\n", i,
bank_start, bank_end, bank_size);
/*
* Align the bank to MMU section size. This is not strictly
* necessary, since the translation table construction code
* handles page granularity without issue. However, aligning
* the MMU entries reduces the size and number of levels in the
* page table, so is worth it.
*/
bank_start = ROUND(bank_start, SZ_2M);
bank_end = bank_end & ~(SZ_2M - 1);
bank_size = bank_end - bank_start;
debug(" aligned: %llx..%llx (+%llx)\n",
bank_start, bank_end, bank_size);
if (bank_end <= bank_start)
continue;
/* Record data used to create MMU translation tables */
ram_bank_count++;
/* Index below is deliberately 1-based to skip MMIO entry */
tegra_mem_map[ram_bank_count].virt = bank_start;
tegra_mem_map[ram_bank_count].phys = bank_start;
tegra_mem_map[ram_bank_count].size = bank_size;
tegra_mem_map[ram_bank_count].attrs =
PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE;
/* Determine best bank to relocate U-Boot into */
if (bank_end > SZ_4G)
bank_end = SZ_4G;
debug(" end %llx (usable)\n", bank_end);
usable_bank_size = bank_end - bank_start;
debug(" size %llx (usable)\n", usable_bank_size);
if ((usable_bank_size >= MIN_USABLE_RAM_SIZE) &&
(bank_end > ram_top)) {
ram_top = bank_end;
region_base = bank_start;
debug("ram top now %llx\n", ram_top);
}
}
/* Ensure memory map contains the desired sentinel entry */
tegra_mem_map[ram_bank_count + 1].virt = 0;
tegra_mem_map[ram_bank_count + 1].phys = 0;
tegra_mem_map[ram_bank_count + 1].size = 0;
tegra_mem_map[ram_bank_count + 1].attrs = 0;
/* Error out if a relocation target couldn't be found */
if (!ram_top) {
pr_err("Can't find a usable RAM top");
hang();
}
return 0;
}
int cboot_dram_init_banksize(void)
{
int i;
if (ram_bank_count == 0)
return -EINVAL;
if ((gd->start_addr_sp - region_base) < MIN_USABLE_STACK_SIZE) {
pr_err("Reservations exceed chosen region size");
hang();
}
for (i = 0; i < ram_bank_count; i++) {
gd->bd->bi_dram[i].start = tegra_mem_map[1 + i].virt;
gd->bd->bi_dram[i].size = tegra_mem_map[1 + i].size;
}
#ifdef CONFIG_PCI
gd->pci_ram_top = ram_top;
#endif
return 0;
}
ulong cboot_get_usable_ram_top(ulong total_size)
{
return ram_top;
}
/*
* The following few functions run late during the boot process and dynamically
* calculate the load address of various binaries. To keep track of multiple
* allocations, some writable list of RAM banks must be used. tegra_mem_map[]
* is used for this purpose to avoid making yet another copy of the list of RAM
* banks. This is safe because tegra_mem_map[] is only used once during very
* early boot to create U-Boot's page tables, long before this code runs. If
* this assumption becomes invalid later, we can just fix the code to copy the
* list of RAM banks into some private data structure before running.
*/
static char *gen_varname(const char *var, const char *ext)
{
size_t len_var = strlen(var);
size_t len_ext = strlen(ext);
size_t len = len_var + len_ext + 1;
char *varext = malloc(len);
if (!varext)
return 0;
strcpy(varext, var);
strcpy(varext + len_var, ext);
return varext;
}
static void mark_ram_allocated(int bank, u64 allocated_start, u64 allocated_end)
{
u64 bank_start = tegra_mem_map[bank].virt;
u64 bank_size = tegra_mem_map[bank].size;
u64 bank_end = bank_start + bank_size;
bool keep_front = allocated_start != bank_start;
bool keep_tail = allocated_end != bank_end;
if (keep_front && keep_tail) {
/*
* There are CONFIG_NR_DRAM_BANKS DRAM entries in the array,
* starting at index 1 (index 0 is MMIO). So, we are at DRAM
* entry "bank" not "bank - 1" as for a typical 0-base array.
* The number of remaining DRAM entries is therefore
* "CONFIG_NR_DRAM_BANKS - bank". We want to duplicate the
* current entry and shift up the remaining entries, dropping
* the last one. Thus, we must copy one fewer entry than the
* number remaining.
*/
memmove(&tegra_mem_map[bank + 1], &tegra_mem_map[bank],
CONFIG_NR_DRAM_BANKS - bank - 1);
tegra_mem_map[bank].size = allocated_start - bank_start;
bank++;
tegra_mem_map[bank].virt = allocated_end;
tegra_mem_map[bank].phys = allocated_end;
tegra_mem_map[bank].size = bank_end - allocated_end;
} else if (keep_front) {
tegra_mem_map[bank].size = allocated_start - bank_start;
} else if (keep_tail) {
tegra_mem_map[bank].virt = allocated_end;
tegra_mem_map[bank].phys = allocated_end;
tegra_mem_map[bank].size = bank_end - allocated_end;
} else {
/*
* We could move all subsequent banks down in the array but
* that's not necessary for subsequent allocations to work, so
* we skip doing so.
*/
tegra_mem_map[bank].size = 0;
}
}
static void reserve_ram(u64 start, u64 size)
{
int bank;
u64 end = start + size;
for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
u64 bank_start = tegra_mem_map[bank].virt;
u64 bank_size = tegra_mem_map[bank].size;
u64 bank_end = bank_start + bank_size;
if (end <= bank_start || start > bank_end)
continue;
mark_ram_allocated(bank, start, end);
break;
}
}
static u64 alloc_ram(u64 size, u64 align, u64 offset)
{
int bank;
for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
u64 bank_start = tegra_mem_map[bank].virt;
u64 bank_size = tegra_mem_map[bank].size;
u64 bank_end = bank_start + bank_size;
u64 allocated = ROUND(bank_start, align) + offset;
u64 allocated_end = allocated + size;
if (allocated_end > bank_end)
continue;
mark_ram_allocated(bank, allocated, allocated_end);
return allocated;
}
return 0;
}
static void set_calculated_aliases(char *aliases, u64 address)
{
char *tmp, *alias;
int err;
aliases = strdup(aliases);
if (!aliases) {
pr_err("strdup(aliases) failed");
return;
}
tmp = aliases;
while (true) {
alias = strsep(&tmp, " ");
if (!alias)
break;
debug("%s: alias: %s\n", __func__, alias);
err = env_set_hex(alias, address);
if (err)
pr_err("Could not set %s\n", alias);
}
free(aliases);
}
static void set_calculated_env_var(const char *var)
{
char *var_size;
char *var_align;
char *var_offset;
char *var_aliases;
u64 size;
u64 align;
u64 offset;
char *aliases;
u64 address;
int err;
var_size = gen_varname(var, "_size");
if (!var_size)
return;
var_align = gen_varname(var, "_align");
if (!var_align)
goto out_free_var_size;
var_offset = gen_varname(var, "_offset");
if (!var_offset)
goto out_free_var_align;
var_aliases = gen_varname(var, "_aliases");
if (!var_aliases)
goto out_free_var_offset;
size = env_get_hex(var_size, 0);
if (!size) {
pr_err("%s not set or zero\n", var_size);
goto out_free_var_aliases;
}
align = env_get_hex(var_align, 1);
/* Handle extant variables, but with a value of 0 */
if (!align)
align = 1;
offset = env_get_hex(var_offset, 0);
aliases = env_get(var_aliases);
debug("%s: Calc var %s; size=%llx, align=%llx, offset=%llx\n",
__func__, var, size, align, offset);
if (aliases)
debug("%s: Aliases: %s\n", __func__, aliases);
address = alloc_ram(size, align, offset);
if (!address) {
pr_err("Could not allocate %s\n", var);
goto out_free_var_aliases;
}
debug("%s: Address %llx\n", __func__, address);
err = env_set_hex(var, address);
if (err)
pr_err("Could not set %s\n", var);
if (aliases)
set_calculated_aliases(aliases, address);
out_free_var_aliases:
free(var_aliases);
out_free_var_offset:
free(var_offset);
out_free_var_align:
free(var_align);
out_free_var_size:
free(var_size);
}
#ifdef DEBUG
static void dump_ram_banks(void)
{
int bank;
for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) {
u64 bank_start = tegra_mem_map[bank].virt;
u64 bank_size = tegra_mem_map[bank].size;
u64 bank_end = bank_start + bank_size;
if (!bank_size)
continue;
printf("%d: %010llx..%010llx (+%010llx)\n", bank - 1,
bank_start, bank_end, bank_size);
}
}
#endif
static void set_calculated_env_vars(void)
{
char *vars, *tmp, *var;
#ifdef DEBUG
printf("RAM banks before any calculated env. var.s:\n");
dump_ram_banks();
#endif
reserve_ram(cboot_boot_x0, fdt_totalsize(cboot_boot_x0));
#ifdef DEBUG
printf("RAM after reserving cboot DTB:\n");
dump_ram_banks();
#endif
vars = env_get("calculated_vars");
if (!vars) {
debug("%s: No env var calculated_vars\n", __func__);
return;
}
vars = strdup(vars);
if (!vars) {
pr_err("strdup(calculated_vars) failed");
return;
}
tmp = vars;
while (true) {
var = strsep(&tmp, " ");
if (!var)
break;
debug("%s: var: %s\n", __func__, var);
set_calculated_env_var(var);
#ifdef DEBUG
printf("RAM banks after allocating %s:\n", var);
dump_ram_banks();
#endif
}
free(vars);
}
static int set_fdt_addr(void)
{
int ret;
ret = env_set_hex("fdt_addr", cboot_boot_x0);
if (ret) {
printf("Failed to set fdt_addr to point at DTB: %d\n", ret);
return ret;
}
return 0;
}
/*
* Attempt to use /chosen/nvidia,ether-mac in the cboot DTB to U-Boot's
* ethaddr environment variable if possible.
*/
static int cboot_get_ethaddr_legacy(const void *fdt, uint8_t mac[ETH_ALEN])
{
const char *const properties[] = {
"nvidia,ethernet-mac",
"nvidia,ether-mac",
};
const char *prop;
unsigned int i;
int node, len;
node = fdt_path_offset(fdt, "/chosen");
if (node < 0) {
printf("Can't find /chosen node in cboot DTB\n");
return node;
}
for (i = 0; i < ARRAY_SIZE(properties); i++) {
prop = fdt_getprop(fdt, node, properties[i], &len);
if (prop)
break;
}
if (!prop) {
printf("Can't find Ethernet MAC address in cboot DTB\n");
return -ENOENT;
}
string_to_enetaddr(prop, mac);
if (!is_valid_ethaddr(mac)) {
printf("Invalid MAC address: %s\n", prop);
return -EINVAL;
}
debug("Legacy MAC address: %pM\n", mac);
return 0;
}
int cboot_get_ethaddr(const void *fdt, uint8_t mac[ETH_ALEN])
{
int node, len, err = 0;
const uchar *prop;
const char *path;
path = fdt_get_alias(fdt, "ethernet");
if (!path) {
err = -ENOENT;
goto out;
}
debug("ethernet alias found: %s\n", path);
node = fdt_path_offset(fdt, path);
if (node < 0) {
err = -ENOENT;
goto out;
}
prop = fdt_getprop(fdt, node, "local-mac-address", &len);
if (!prop) {
err = -ENOENT;
goto out;
}
if (len != ETH_ALEN) {
err = -EINVAL;
goto out;
}
debug("MAC address: %pM\n", prop);
memcpy(mac, prop, ETH_ALEN);
out:
if (err < 0)
err = cboot_get_ethaddr_legacy(fdt, mac);
return err;
}
static char *strip(const char *ptr)
{
const char *end;
while (*ptr && isblank(*ptr))
ptr++;
/* empty string */
if (*ptr == '\0')
return strdup(ptr);
end = ptr;
while (end[1])
end++;
while (isblank(*end))
end--;
return strndup(ptr, end - ptr + 1);
}
static char *cboot_get_bootargs(const void *fdt)
{
const char *args;
int offset, len;
offset = fdt_path_offset(fdt, "/chosen");
if (offset < 0)
return NULL;
args = fdt_getprop(fdt, offset, "bootargs", &len);
if (!args)
return NULL;
return strip(args);
}
int cboot_late_init(void)
{
const void *fdt = (const void *)cboot_boot_x0;
uint8_t mac[ETH_ALEN];
char *bootargs;
int err;
set_calculated_env_vars();
/*
* Ignore errors here; the value may not be used depending on
* extlinux.conf or boot script content.
*/
set_fdt_addr();
/* Ignore errors here; not all cases care about Ethernet addresses */
err = cboot_get_ethaddr(fdt, mac);
if (!err) {
void *blob = (void *)gd->fdt_blob;
err = fdtdec_set_ethernet_mac_address(blob, mac, sizeof(mac));
if (err < 0)
printf("failed to set MAC address %pM: %d\n", mac, err);
}
bootargs = cboot_get_bootargs(fdt);
if (bootargs) {
env_set("cbootargs", bootargs);
free(bootargs);
}
return 0;
}