mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
on at91sam9x5 PRES offset is 4 in the PMC master clock register. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Andreas Bießmann <andreas@biessmann.org>
289 lines
6.8 KiB
C
289 lines
6.8 KiB
C
/*
|
|
* [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
#if !defined(CONFIG_AT91FAMILY)
|
|
# error You need to define CONFIG_AT91FAMILY in your board config!
|
|
#endif
|
|
|
|
#define EN_PLLB_TIMEOUT 500
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static unsigned long at91_css_to_rate(unsigned long css)
|
|
{
|
|
switch (css) {
|
|
case AT91_PMC_MCKR_CSS_SLOW:
|
|
return CONFIG_SYS_AT91_SLOW_CLOCK;
|
|
case AT91_PMC_MCKR_CSS_MAIN:
|
|
return gd->arch.main_clk_rate_hz;
|
|
case AT91_PMC_MCKR_CSS_PLLA:
|
|
return gd->arch.plla_rate_hz;
|
|
case AT91_PMC_MCKR_CSS_PLLB:
|
|
return gd->arch.pllb_rate_hz;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_ATMEL
|
|
static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
|
|
{
|
|
unsigned i, div = 0, mul = 0, diff = 1 << 30;
|
|
unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
|
|
|
|
/* PLL output max 240 MHz (or 180 MHz per errata) */
|
|
if (out_freq > 240000000)
|
|
goto fail;
|
|
|
|
for (i = 1; i < 256; i++) {
|
|
int diff1;
|
|
unsigned input, mul1;
|
|
|
|
/*
|
|
* PLL input between 1MHz and 32MHz per spec, but lower
|
|
* frequences seem necessary in some cases so allow 100K.
|
|
* Warning: some newer products need 2MHz min.
|
|
*/
|
|
input = main_freq / i;
|
|
#if defined(CONFIG_AT91SAM9G20)
|
|
if (input < 2000000)
|
|
continue;
|
|
#endif
|
|
if (input < 100000)
|
|
continue;
|
|
if (input > 32000000)
|
|
continue;
|
|
|
|
mul1 = out_freq / input;
|
|
#if defined(CONFIG_AT91SAM9G20)
|
|
if (mul > 63)
|
|
continue;
|
|
#endif
|
|
if (mul1 > 2048)
|
|
continue;
|
|
if (mul1 < 2)
|
|
goto fail;
|
|
|
|
diff1 = out_freq - input * mul1;
|
|
if (diff1 < 0)
|
|
diff1 = -diff1;
|
|
if (diff > diff1) {
|
|
diff = diff1;
|
|
div = i;
|
|
mul = mul1;
|
|
if (diff == 0)
|
|
break;
|
|
}
|
|
}
|
|
if (i == 256 && diff > (out_freq >> 5))
|
|
goto fail;
|
|
return ret | ((mul - 1) << 16) | div;
|
|
fail:
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static u32 at91_pll_rate(u32 freq, u32 reg)
|
|
{
|
|
unsigned mul, div;
|
|
|
|
div = reg & 0xff;
|
|
mul = (reg >> 16) & 0x7ff;
|
|
if (div && mul) {
|
|
freq /= div;
|
|
freq *= mul + 1;
|
|
} else
|
|
freq = 0;
|
|
|
|
return freq;
|
|
}
|
|
|
|
int at91_clock_init(unsigned long main_clock)
|
|
{
|
|
unsigned freq, mckr;
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
|
|
unsigned tmp;
|
|
/*
|
|
* When the bootloader initialized the main oscillator correctly,
|
|
* there's no problem using the cycle counter. But if it didn't,
|
|
* or when using oscillator bypass mode, we must be told the speed
|
|
* of the main clock.
|
|
*/
|
|
if (!main_clock) {
|
|
do {
|
|
tmp = readl(&pmc->mcfr);
|
|
} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
|
|
tmp &= AT91_PMC_MCFR_MAINF_MASK;
|
|
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
|
|
}
|
|
#endif
|
|
gd->arch.main_clk_rate_hz = main_clock;
|
|
|
|
/* report if PLLA is more than mildly overclocked */
|
|
gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
|
|
|
|
#ifdef CONFIG_USB_ATMEL
|
|
/*
|
|
* USB clock init: choose 48 MHz PLLB value,
|
|
* disable 48MHz clock during usb peripheral suspend.
|
|
*
|
|
* REVISIT: assumes MCK doesn't derive from PLLB!
|
|
*/
|
|
gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
|
|
AT91_PMC_PLLBR_USBDIV_2;
|
|
gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
|
|
gd->arch.at91_pllb_usb_init);
|
|
#endif
|
|
|
|
/*
|
|
* MCK and CPU derive from one of those primary clocks.
|
|
* For now, assume this parentage won't change.
|
|
*/
|
|
mckr = readl(&pmc->mckr);
|
|
#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
|
|
|| defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
|
|
/* plla divisor by 2 */
|
|
gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
|
|
#endif
|
|
gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
freq = gd->arch.mck_rate_hz;
|
|
|
|
#if defined(CONFIG_AT91SAM9X5)
|
|
/* different in prescale on at91sam9x5 */
|
|
freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 4));
|
|
#else
|
|
freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
|
|
#endif
|
|
|
|
#if defined(CONFIG_AT91SAM9G20)
|
|
/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
|
|
gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
|
|
freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
|
|
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
|
|
freq /= 2; /* processor clock division */
|
|
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
|
|
|| defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
|
|
/* mdiv <==> divisor
|
|
* 0 <==> 1
|
|
* 1 <==> 2
|
|
* 2 <==> 4
|
|
* 3 <==> 3
|
|
*/
|
|
gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
|
|
(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
|
|
? freq / 3
|
|
: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
|
|
#else
|
|
gd->arch.mck_rate_hz = freq /
|
|
(1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
|
|
#endif
|
|
gd->arch.cpu_clk_rate_hz = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(AT91_PLL_LOCK_TIMEOUT)
|
|
#define AT91_PLL_LOCK_TIMEOUT 1000000
|
|
#endif
|
|
|
|
void at91_plla_init(u32 pllar)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
writel(pllar, &pmc->pllar);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_LOCKA))
|
|
;
|
|
}
|
|
void at91_pllb_init(u32 pllbr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
writel(pllbr, &pmc->pllbr);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_LOCKB))
|
|
;
|
|
}
|
|
|
|
void at91_mck_init(u32 mckr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 tmp;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~AT91_PMC_MCKR_PRES_MASK;
|
|
tmp |= mckr & AT91_PMC_MCKR_PRES_MASK;
|
|
writel(tmp, &pmc->mckr);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~AT91_PMC_MCKR_MDIV_MASK;
|
|
tmp |= mckr & AT91_PMC_MCKR_MDIV_MASK;
|
|
writel(tmp, &pmc->mckr);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~AT91_PMC_MCKR_PLLADIV_MASK;
|
|
tmp |= mckr & AT91_PMC_MCKR_PLLADIV_MASK;
|
|
writel(tmp, &pmc->mckr);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~AT91_PMC_MCKR_CSS_MASK;
|
|
tmp |= mckr & AT91_PMC_MCKR_CSS_MASK;
|
|
writel(tmp, &pmc->mckr);
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
}
|
|
|
|
int at91_pllb_clk_enable(u32 pllbr)
|
|
{
|
|
struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
|
|
ulong start_time, tmp_time;
|
|
|
|
start_time = get_timer(0);
|
|
writel(pllbr, &pmc->pllbr);
|
|
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
|
|
tmp_time = get_timer(0);
|
|
if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
|
|
printf("ERROR: failed to enable PLLB\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int at91_pllb_clk_disable(void)
|
|
{
|
|
struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
|
|
ulong start_time, tmp_time;
|
|
|
|
start_time = get_timer(0);
|
|
writel(0, &pmc->pllbr);
|
|
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
|
|
tmp_time = get_timer(0);
|
|
if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {
|
|
printf("ERROR: failed to disable PLLB\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|