mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-26 20:09:02 +09:00
621 lines
15 KiB
C
621 lines
15 KiB
C
/*
|
|
dm9000.c: Version 1.2 12/15/2003
|
|
|
|
A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
|
|
Copyright (C) 1997 Sten Wang
|
|
|
|
This program is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU General Public License
|
|
as published by the Free Software Foundation; either version 2
|
|
of the License, or (at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
(C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
|
|
|
|
V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
|
|
06/22/2001 Support DM9801 progrmming
|
|
E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
|
|
E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
|
|
R17 = (R17 & 0xfff0) | NF + 3
|
|
E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
|
|
R17 = (R17 & 0xfff0) | NF
|
|
|
|
v1.00 modify by simon 2001.9.5
|
|
change for kernel 2.4.x
|
|
|
|
v1.1 11/09/2001 fix force mode bug
|
|
|
|
v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
|
|
Fixed phy reset.
|
|
Added tx/rx 32 bit mode.
|
|
Cleaned up for kernel merge.
|
|
|
|
--------------------------------------
|
|
|
|
12/15/2003 Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
|
|
|
|
TODO: Homerun NIC and longrun NIC are not functional, only internal at the
|
|
moment.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_DRIVER_DM9000
|
|
|
|
#include "dm9000x.h"
|
|
|
|
/* Board/System/Debug information/definition ---------------- */
|
|
|
|
#define DM9801_NOISE_FLOOR 0x08
|
|
#define DM9802_NOISE_FLOOR 0x05
|
|
|
|
/* #define CONFIG_DM9000_DEBUG */
|
|
|
|
#ifdef CONFIG_DM9000_DEBUG
|
|
#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
|
|
#else /* */
|
|
#define DM9000_DBG(fmt,args...)
|
|
#endif /* */
|
|
enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
|
|
1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
|
|
8, DM9000_1M_HPNA = 0x10
|
|
};
|
|
enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
|
|
};
|
|
|
|
/* Structure/enum declaration ------------------------------- */
|
|
typedef struct board_info {
|
|
u32 runt_length_counter; /* counter: RX length < 64byte */
|
|
u32 long_length_counter; /* counter: RX length > 1514byte */
|
|
u32 reset_counter; /* counter: RESET */
|
|
u32 reset_tx_timeout; /* RESET caused by TX Timeout */
|
|
u32 reset_rx_status; /* RESET caused by RX Statsus wrong */
|
|
u16 tx_pkt_cnt;
|
|
u16 queue_start_addr;
|
|
u16 dbug_cnt;
|
|
u8 phy_addr;
|
|
u8 device_wait_reset; /* device state */
|
|
u8 nic_type; /* NIC type */
|
|
unsigned char srom[128];
|
|
} board_info_t;
|
|
board_info_t dmfe_info;
|
|
|
|
/* For module input parameter */
|
|
static int media_mode = DM9000_AUTO;
|
|
static u8 nfloor = 0;
|
|
|
|
/* function declaration ------------------------------------- */
|
|
int eth_init(bd_t * bd);
|
|
int eth_send(volatile void *, int);
|
|
int eth_rx(void);
|
|
void eth_halt(void);
|
|
static int dm9000_probe(void);
|
|
static u16 phy_read(int);
|
|
static void phy_write(int, u16);
|
|
u16 read_srom_word(int);
|
|
static u8 DM9000_ior(int);
|
|
static void DM9000_iow(int reg, u8 value);
|
|
|
|
/* DM9000 network board routine ---------------------------- */
|
|
|
|
#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
|
|
#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
|
|
#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
|
|
#define DM9000_inb(r) (*(volatile u8 *)r)
|
|
#define DM9000_inw(r) (*(volatile u16 *)r)
|
|
#define DM9000_inl(r) (*(volatile u32 *)r)
|
|
|
|
#ifdef CONFIG_DM9000_DEBUG
|
|
static void
|
|
dump_regs(void)
|
|
{
|
|
DM9000_DBG("\n");
|
|
DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(0));
|
|
DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(1));
|
|
DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(2));
|
|
DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(3));
|
|
DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
|
|
DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
|
|
DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
|
|
DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(ISR));
|
|
DM9000_DBG("\n");
|
|
}
|
|
#endif /* */
|
|
|
|
/*
|
|
Search DM9000 board, allocate space and register it
|
|
*/
|
|
int
|
|
dm9000_probe(void)
|
|
{
|
|
u32 id_val;
|
|
id_val = DM9000_ior(DM9000_VIDL);
|
|
id_val |= DM9000_ior(DM9000_VIDH) << 8;
|
|
id_val |= DM9000_ior(DM9000_PIDL) << 16;
|
|
id_val |= DM9000_ior(DM9000_PIDH) << 24;
|
|
if (id_val == DM9000_ID) {
|
|
printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
|
|
id_val);
|
|
return 0;
|
|
} else {
|
|
printf("dm9000 not found at 0x%08x id: 0x%08x\n",
|
|
CONFIG_DM9000_BASE, id_val);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Set PHY operationg mode
|
|
*/
|
|
static void
|
|
set_PHY_mode(void)
|
|
{
|
|
u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
|
|
if (!(media_mode & DM9000_AUTO)) {
|
|
switch (media_mode) {
|
|
case DM9000_10MHD:
|
|
phy_reg4 = 0x21;
|
|
phy_reg0 = 0x0000;
|
|
break;
|
|
case DM9000_10MFD:
|
|
phy_reg4 = 0x41;
|
|
phy_reg0 = 0x1100;
|
|
break;
|
|
case DM9000_100MHD:
|
|
phy_reg4 = 0x81;
|
|
phy_reg0 = 0x2000;
|
|
break;
|
|
case DM9000_100MFD:
|
|
phy_reg4 = 0x101;
|
|
phy_reg0 = 0x3100;
|
|
break;
|
|
}
|
|
phy_write(4, phy_reg4); /* Set PHY media mode */
|
|
phy_write(0, phy_reg0); /* Tmp */
|
|
}
|
|
DM9000_iow(DM9000_GPCR, 0x01); /* Let GPIO0 output */
|
|
DM9000_iow(DM9000_GPR, 0x00); /* Enable PHY */
|
|
}
|
|
|
|
/*
|
|
Init HomeRun DM9801
|
|
*/
|
|
static void
|
|
program_dm9801(u16 HPNA_rev)
|
|
{
|
|
__u16 reg16, reg17, reg24, reg25;
|
|
if (!nfloor)
|
|
nfloor = DM9801_NOISE_FLOOR;
|
|
reg16 = phy_read(16);
|
|
reg17 = phy_read(17);
|
|
reg24 = phy_read(24);
|
|
reg25 = phy_read(25);
|
|
switch (HPNA_rev) {
|
|
case 0xb900: /* DM9801 E3 */
|
|
reg16 |= 0x1000;
|
|
reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
|
|
break;
|
|
case 0xb901: /* DM9801 E4 */
|
|
reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
|
|
reg17 = (reg17 & 0xfff0) + nfloor + 3;
|
|
break;
|
|
case 0xb902: /* DM9801 E5 */
|
|
case 0xb903: /* DM9801 E6 */
|
|
default:
|
|
reg16 |= 0x1000;
|
|
reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
|
|
reg17 = (reg17 & 0xfff0) + nfloor;
|
|
}
|
|
phy_write(16, reg16);
|
|
phy_write(17, reg17);
|
|
phy_write(25, reg25);
|
|
}
|
|
|
|
/*
|
|
Init LongRun DM9802
|
|
*/
|
|
static void
|
|
program_dm9802(void)
|
|
{
|
|
__u16 reg25;
|
|
if (!nfloor)
|
|
nfloor = DM9802_NOISE_FLOOR;
|
|
reg25 = phy_read(25);
|
|
reg25 = (reg25 & 0xff00) + nfloor;
|
|
phy_write(25, reg25);
|
|
}
|
|
|
|
/* Identify NIC type
|
|
*/
|
|
static void
|
|
identify_nic(void)
|
|
{
|
|
struct board_info *db = &dmfe_info; /* Point a board information structure */
|
|
u16 phy_reg3;
|
|
DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
|
|
phy_reg3 = phy_read(3);
|
|
switch (phy_reg3 & 0xfff0) {
|
|
case 0xb900:
|
|
if (phy_read(31) == 0x4404) {
|
|
db->nic_type = HOMERUN_NIC;
|
|
program_dm9801(phy_reg3);
|
|
DM9000_DBG("found homerun NIC\n");
|
|
} else {
|
|
db->nic_type = LONGRUN_NIC;
|
|
DM9000_DBG("found longrun NIC\n");
|
|
program_dm9802();
|
|
}
|
|
break;
|
|
default:
|
|
db->nic_type = FASTETHER_NIC;
|
|
break;
|
|
}
|
|
DM9000_iow(DM9000_NCR, 0);
|
|
}
|
|
|
|
/* General Purpose dm9000 reset routine */
|
|
static void
|
|
dm9000_reset(void)
|
|
{
|
|
DM9000_DBG("resetting\n");
|
|
DM9000_iow(DM9000_NCR, NCR_RST);
|
|
udelay(1000); /* delay 1ms */
|
|
}
|
|
|
|
/* Initilize dm9000 board
|
|
*/
|
|
int
|
|
eth_init(bd_t * bd)
|
|
{
|
|
int i, oft, lnk;
|
|
DM9000_DBG("eth_init()\n");
|
|
|
|
/* RESET device */
|
|
dm9000_reset();
|
|
dm9000_probe();
|
|
|
|
/* NIC Type: FASTETHER, HOMERUN, LONGRUN */
|
|
identify_nic();
|
|
|
|
/* GPIO0 on pre-activate PHY */
|
|
DM9000_iow(DM9000_GPR, 0x00); /*REG_1F bit0 activate phyxcer */
|
|
|
|
/* Set PHY */
|
|
set_PHY_mode();
|
|
|
|
/* Program operating register */
|
|
DM9000_iow(DM9000_NCR, 0x0); /* only intern phy supported by now */
|
|
DM9000_iow(DM9000_TCR, 0); /* TX Polling clear */
|
|
DM9000_iow(DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
|
|
DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8)); /* Flow Control : High/Low Water */
|
|
DM9000_iow(DM9000_FCR, 0x0); /* SH FIXME: This looks strange! Flow Control */
|
|
DM9000_iow(DM9000_SMCR, 0); /* Special Mode */
|
|
DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); /* clear TX status */
|
|
DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
|
|
|
|
/* Set Node address */
|
|
for (i = 0; i < 6; i++)
|
|
((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
|
|
|
|
if (is_zero_ether_addr(bd->bi_enetaddr) ||
|
|
is_multicast_ether_addr(bd->bi_enetaddr)) {
|
|
/* try reading from environment */
|
|
u8 i;
|
|
char *s, *e;
|
|
s = getenv ("ethaddr");
|
|
for (i = 0; i < 6; ++i) {
|
|
bd->bi_enetaddr[i] = s ?
|
|
simple_strtoul (s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e + 1 : e;
|
|
}
|
|
}
|
|
|
|
printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
|
|
bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
|
|
bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
|
|
for (i = 0, oft = 0x10; i < 6; i++, oft++)
|
|
DM9000_iow(oft, bd->bi_enetaddr[i]);
|
|
for (i = 0, oft = 0x16; i < 8; i++, oft++)
|
|
DM9000_iow(oft, 0xff);
|
|
|
|
/* read back mac, just to be sure */
|
|
for (i = 0, oft = 0x10; i < 6; i++, oft++)
|
|
DM9000_DBG("%02x:", DM9000_ior(oft));
|
|
DM9000_DBG("\n");
|
|
|
|
/* Activate DM9000 */
|
|
DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); /* RX enable */
|
|
DM9000_iow(DM9000_IMR, IMR_PAR); /* Enable TX/RX interrupt mask */
|
|
i = 0;
|
|
while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
|
|
udelay(1000);
|
|
i++;
|
|
if (i == 10000) {
|
|
printf("could not establish link\n");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* see what we've got */
|
|
lnk = phy_read(17) >> 12;
|
|
printf("operating at ");
|
|
switch (lnk) {
|
|
case 1:
|
|
printf("10M half duplex ");
|
|
break;
|
|
case 2:
|
|
printf("10M full duplex ");
|
|
break;
|
|
case 4:
|
|
printf("100M half duplex ");
|
|
break;
|
|
case 8:
|
|
printf("100M full duplex ");
|
|
break;
|
|
default:
|
|
printf("unknown: %d ", lnk);
|
|
break;
|
|
}
|
|
printf("mode\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
Hardware start transmission.
|
|
Send a packet to media from the upper layer.
|
|
*/
|
|
int
|
|
eth_send(volatile void *packet, int length)
|
|
{
|
|
char *data_ptr;
|
|
u32 tmplen, i;
|
|
int tmo;
|
|
DM9000_DBG("eth_send: length: %d\n", length);
|
|
for (i = 0; i < length; i++) {
|
|
if (i % 8 == 0)
|
|
DM9000_DBG("\nSend: 02x: ", i);
|
|
DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
|
|
} DM9000_DBG("\n");
|
|
|
|
/* Move data to DM9000 TX RAM */
|
|
data_ptr = (char *) packet;
|
|
DM9000_outb(DM9000_MWCMD, DM9000_IO);
|
|
|
|
#ifdef CONFIG_DM9000_USE_8BIT
|
|
/* Byte mode */
|
|
for (i = 0; i < length; i++)
|
|
DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_16BIT
|
|
tmplen = (length + 1) / 2;
|
|
for (i = 0; i < tmplen; i++)
|
|
DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_32BIT
|
|
tmplen = (length + 3) / 4;
|
|
for (i = 0; i < tmplen; i++)
|
|
DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
|
|
|
|
#endif /* */
|
|
|
|
/* Set TX length to DM9000 */
|
|
DM9000_iow(DM9000_TXPLL, length & 0xff);
|
|
DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
|
|
|
|
/* Issue TX polling command */
|
|
DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
|
|
|
|
/* wait for end of transmission */
|
|
tmo = get_timer(0) + 5 * CFG_HZ;
|
|
while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
|
|
if (get_timer(0) >= tmo) {
|
|
printf("transmission timeout\n");
|
|
break;
|
|
}
|
|
}
|
|
DM9000_DBG("transmit done\n\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
Stop the interface.
|
|
The interface is stopped when it is brought.
|
|
*/
|
|
void
|
|
eth_halt(void)
|
|
{
|
|
DM9000_DBG("eth_halt\n");
|
|
|
|
/* RESET devie */
|
|
phy_write(0, 0x8000); /* PHY RESET */
|
|
DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
|
|
DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
|
|
DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
|
|
}
|
|
|
|
/*
|
|
Received a packet and pass to upper layer
|
|
*/
|
|
int
|
|
eth_rx(void)
|
|
{
|
|
u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
|
|
u16 RxStatus, RxLen = 0;
|
|
u32 tmplen, i;
|
|
#ifdef CONFIG_DM9000_USE_32BIT
|
|
u32 tmpdata;
|
|
#endif
|
|
|
|
/* Check packet ready or not */
|
|
DM9000_ior(DM9000_MRCMDX); /* Dummy read */
|
|
rxbyte = DM9000_inb(DM9000_DATA); /* Got most updated data */
|
|
if (rxbyte == 0)
|
|
return 0;
|
|
|
|
/* Status check: this byte must be 0 or 1 */
|
|
if (rxbyte > 1) {
|
|
DM9000_iow(DM9000_RCR, 0x00); /* Stop Device */
|
|
DM9000_iow(DM9000_ISR, 0x80); /* Stop INT request */
|
|
DM9000_DBG("rx status check: %d\n", rxbyte);
|
|
}
|
|
DM9000_DBG("receiving packet\n");
|
|
|
|
/* A packet ready now & Get status/length */
|
|
DM9000_outb(DM9000_MRCMD, DM9000_IO);
|
|
|
|
#ifdef CONFIG_DM9000_USE_8BIT
|
|
RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
|
|
RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_16BIT
|
|
RxStatus = DM9000_inw(DM9000_DATA);
|
|
RxLen = DM9000_inw(DM9000_DATA);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_32BIT
|
|
tmpdata = DM9000_inl(DM9000_DATA);
|
|
RxStatus = tmpdata;
|
|
RxLen = tmpdata >> 16;
|
|
|
|
#endif /* */
|
|
DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
|
|
|
|
/* Move data from DM9000 */
|
|
/* Read received packet from RX SRAM */
|
|
#ifdef CONFIG_DM9000_USE_8BIT
|
|
for (i = 0; i < RxLen; i++)
|
|
rdptr[i] = DM9000_inb(DM9000_DATA);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_16BIT
|
|
tmplen = (RxLen + 1) / 2;
|
|
for (i = 0; i < tmplen; i++)
|
|
((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
|
|
|
|
#endif /* */
|
|
#ifdef CONFIG_DM9000_USE_32BIT
|
|
tmplen = (RxLen + 3) / 4;
|
|
for (i = 0; i < tmplen; i++)
|
|
((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
|
|
|
|
#endif /* */
|
|
if ((RxStatus & 0xbf00) || (RxLen < 0x40)
|
|
|| (RxLen > DM9000_PKT_MAX)) {
|
|
if (RxStatus & 0x100) {
|
|
printf("rx fifo error\n");
|
|
}
|
|
if (RxStatus & 0x200) {
|
|
printf("rx crc error\n");
|
|
}
|
|
if (RxStatus & 0x8000) {
|
|
printf("rx length error\n");
|
|
}
|
|
if (RxLen > DM9000_PKT_MAX) {
|
|
printf("rx length too big\n");
|
|
dm9000_reset();
|
|
}
|
|
} else {
|
|
|
|
/* Pass to upper layer */
|
|
DM9000_DBG("passing packet to upper layer\n");
|
|
NetReceive(NetRxPackets[0], RxLen);
|
|
return RxLen;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
Read a word data from SROM
|
|
*/
|
|
u16
|
|
read_srom_word(int offset)
|
|
{
|
|
DM9000_iow(DM9000_EPAR, offset);
|
|
DM9000_iow(DM9000_EPCR, 0x4);
|
|
udelay(8000);
|
|
DM9000_iow(DM9000_EPCR, 0x0);
|
|
return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
|
|
}
|
|
|
|
void
|
|
write_srom_word(int offset, u16 val)
|
|
{
|
|
DM9000_iow(DM9000_EPAR, offset);
|
|
DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
|
|
DM9000_iow(DM9000_EPDRL, (val & 0xff));
|
|
DM9000_iow(DM9000_EPCR, 0x12);
|
|
udelay(8000);
|
|
DM9000_iow(DM9000_EPCR, 0);
|
|
}
|
|
|
|
|
|
/*
|
|
Read a byte from I/O port
|
|
*/
|
|
static u8
|
|
DM9000_ior(int reg)
|
|
{
|
|
DM9000_outb(reg, DM9000_IO);
|
|
return DM9000_inb(DM9000_DATA);
|
|
}
|
|
|
|
/*
|
|
Write a byte to I/O port
|
|
*/
|
|
static void
|
|
DM9000_iow(int reg, u8 value)
|
|
{
|
|
DM9000_outb(reg, DM9000_IO);
|
|
DM9000_outb(value, DM9000_DATA);
|
|
}
|
|
|
|
/*
|
|
Read a word from phyxcer
|
|
*/
|
|
static u16
|
|
phy_read(int reg)
|
|
{
|
|
u16 val;
|
|
|
|
/* Fill the phyxcer register into REG_0C */
|
|
DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
|
|
DM9000_iow(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
|
|
udelay(100); /* Wait read complete */
|
|
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
|
|
val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
|
|
|
|
/* The read data keeps on REG_0D & REG_0E */
|
|
DM9000_DBG("phy_read(%d): %d\n", reg, val);
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
Write a word to phyxcer
|
|
*/
|
|
static void
|
|
phy_write(int reg, u16 value)
|
|
{
|
|
|
|
/* Fill the phyxcer register into REG_0C */
|
|
DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
|
|
|
|
/* Fill the written data into REG_0D & REG_0E */
|
|
DM9000_iow(DM9000_EPDRL, (value & 0xff));
|
|
DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
|
|
DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
|
|
udelay(500); /* Wait write complete */
|
|
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
|
|
DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
|
|
}
|
|
#endif /* CONFIG_DRIVER_DM9000 */
|