Marek Behún 3dc2f4549c arm: mvebu: dts: Fix Turris Mox device tree ... DTC issues a warning because #address-cells and #size-cells properties are not set in the mdio node. Also add ethernet1 alias. Also add RTC node. Also fix USB3 regulator startup delay time. Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the speed value is not used byt the comphy driver for PCI Express, but should be 5 GHz nonetheless). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>		2019-01-21 11:39:49 +01:00
..
cpu	armv8: ls1043a: correct the PCIe INTx fixup	2019-01-17 13:16:44 -08:00
dts	arm: mvebu: dts: Fix Turris Mox device tree	2019-01-21 11:39:49 +01:00
include	Add TFA boot flow for more boards	2019-01-18 23:11:51 -05:00
lib	arm: bootm: fix sp detection at end of address range	2019-01-16 23:16:25 -05:00
mach-aspeed
mach-at91	ARM: at91: lds: add test for SPL binary size and bss size	2018-12-07 08:13:44 -05:00
mach-bcm283x	arm: Kconfig: spelling fixes	2019-01-18 09:16:15 -05:00
mach-bcmstb	board: arm: Add support for Broadcom BCM7260	2018-09-10 21:19:31 -04:00
mach-davinci	driver: net: consolidate ti's code in separate folder	2018-11-05 10:41:59 -06:00
mach-exynos	exynos: Leave the compiler to choose the register to avoid possible r0 corruption	2019-01-04 17:28:50 +09:00
mach-highbank
mach-imx	Merge branch 'master' of git://git.denx.de/u-boot-usb	2019-01-11 10:47:41 -05:00
mach-integrator
mach-k3	arm: K3: Fix usage of CONFIG_SYS_K3_KEY	2018-12-26 21:35:52 -05:00
mach-keystone	ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL	2018-12-10 07:15:21 +01:00
mach-kirkwood	Convert CONFIG_MII et al to Kconfig	2018-08-17 13:03:54 -04:00
mach-mediatek	mt7629: use linux kernel compatible SMP initialization	2018-12-26 21:35:53 -05:00
mach-meson	ARM: meson: Add boot device discovery	2018-11-26 14:40:52 +01:00
mach-mvebu	ARM: mvebu: remove out of date comment	2018-12-21 08:59:05 +01:00
mach-omap2	ARM: mach-omap2: omap3: Fix GPIO clocking in SPL	2018-12-26 21:20:48 -05:00
mach-orion5x	arm: remove prototype for get_timer_masked	2018-10-10 13:35:09 -04:00
mach-owl	board: Add uCRobotics Bubblegum-96 board support	2018-07-09 15:25:23 -04:00
mach-qemu	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-rmobile	ARM: rmobile: Fix to enable icache early in Gen3	2018-12-07 16:31:15 +01:00
mach-rockchip	rockchip: rk3036: ram: update license	2019-01-02 22:36:46 +01:00
mach-s5pc1xx
mach-snapdragon	mach-snapdragon: db410: pinctrl: fix pin count	2019-01-18 09:16:15 -05:00
mach-socfpga	arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration	2018-12-20 17:12:25 +01:00
mach-sti
mach-stm32	mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7	2018-10-06 14:09:41 -04:00
mach-stm32mp	gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h	2018-12-07 08:13:47 -05:00
mach-sunxi	sunxi: pmic_bus: Decrease boot time by not writing duplicate data	2018-12-07 22:24:33 +05:30
mach-tegra	linux/sizes.h: sync from kernel	2018-11-20 13:08:15 +01:00
mach-uniphier	ARM: uniphier: do not modify bootcmd environment variable at run-time	2018-12-29 11:38:33 +09:00
mach-versal	arm64: versal: Add Xilinx Versal Virtual QEMU board	2018-10-16 16:53:24 +02:00
mach-versatile
mach-zynq	Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq	2018-08-06 08:44:35 +02:00
mach-zynqmp-r5	arm: zynqmp: Add ZynqMP minimal R5 support	2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv	SPDX: Convert a few files that were missed before	2018-05-10 20:38:35 -04:00
config.mk	efi_loader: Rename sections to allow for implicit data	2018-07-25 14:57:44 +02:00
Kconfig	sunxi: drop default SPL_LIBDISK_SUPPORT enablement	2019-01-09 07:13:30 -05:00
Kconfig.debug
Makefile	imx: rename mx8m,MX8M to imx8m,IMX8M	2019-01-01 14:12:18 +01:00