mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-14 22:23:56 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
251 lines
5.5 KiB
C
251 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <tps6586x.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
|
|
static struct udevice *tps6586x_dev;
|
|
|
|
enum {
|
|
/* Registers that we access */
|
|
SUPPLY_CONTROL1 = 0x20,
|
|
SUPPLY_CONTROL2,
|
|
SM1_VOLTAGE_V1 = 0x23,
|
|
SM1_VOLTAGE_V2,
|
|
SM0_VOLTAGE_V1 = 0x26,
|
|
SM0_VOLTAGE_V2,
|
|
PFM_MODE = 0x47,
|
|
|
|
/* Bits in the supply control registers */
|
|
CTRL_SM1_RAMP = 0x01,
|
|
CTRL_SM1_SUPPLY2 = 0x02,
|
|
CTRL_SM0_RAMP = 0x04,
|
|
CTRL_SM0_SUPPLY2 = 0x08,
|
|
};
|
|
|
|
#define MAX_I2C_RETRY 3
|
|
static int tps6586x_read(int reg)
|
|
{
|
|
int i;
|
|
uchar data;
|
|
int retval = -1;
|
|
|
|
for (i = 0; i < MAX_I2C_RETRY; ++i) {
|
|
if (!dm_i2c_read(tps6586x_dev, reg, &data, 1)) {
|
|
retval = (int)data;
|
|
goto exit;
|
|
}
|
|
|
|
/* i2c access failed, retry */
|
|
udelay(100);
|
|
}
|
|
|
|
exit:
|
|
debug("pmu_read %x=%x\n", reg, retval);
|
|
if (retval < 0)
|
|
debug("%s: failed to read register %#x: %d\n", __func__, reg,
|
|
retval);
|
|
return retval;
|
|
}
|
|
|
|
static int tps6586x_write(int reg, uchar *data, uint len)
|
|
{
|
|
int i;
|
|
int retval = -1;
|
|
|
|
for (i = 0; i < MAX_I2C_RETRY; ++i) {
|
|
if (!dm_i2c_write(tps6586x_dev, reg, data, len)) {
|
|
retval = 0;
|
|
goto exit;
|
|
}
|
|
|
|
/* i2c access failed, retry */
|
|
udelay(100);
|
|
}
|
|
|
|
exit:
|
|
debug("pmu_write %x=%x: ", reg, retval);
|
|
for (i = 0; i < len; i++)
|
|
debug("%x ", data[i]);
|
|
if (retval)
|
|
debug("%s: failed to write register %#x\n", __func__, reg);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Get current voltage of SM0 and SM1
|
|
*
|
|
* @param sm0 Place to put SM0 voltage
|
|
* @param sm1 Place to put SM1 voltage
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
static int read_voltages(int *sm0, int *sm1)
|
|
{
|
|
int ctrl1, ctrl2;
|
|
int is_v2;
|
|
|
|
/*
|
|
* Each vdd has two supply sources, ie, v1 and v2.
|
|
* The supply control reg1 and reg2 determine the current selection.
|
|
*/
|
|
ctrl1 = tps6586x_read(SUPPLY_CONTROL1);
|
|
ctrl2 = tps6586x_read(SUPPLY_CONTROL2);
|
|
if (ctrl1 == -1 || ctrl2 == -1)
|
|
return -ENOTSUPP;
|
|
|
|
/* Figure out whether V1 or V2 is selected */
|
|
is_v2 = (ctrl1 | ctrl2) & CTRL_SM0_SUPPLY2;
|
|
*sm0 = tps6586x_read(is_v2 ? SM0_VOLTAGE_V2 : SM0_VOLTAGE_V1);
|
|
*sm1 = tps6586x_read(is_v2 ? SM1_VOLTAGE_V2 : SM1_VOLTAGE_V1);
|
|
if (*sm0 == -1 || *sm1 == -1)
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_voltage(int reg, int data, int rate)
|
|
{
|
|
uchar control_bit;
|
|
uchar buff[3];
|
|
|
|
control_bit = (reg == SM0_VOLTAGE_V1 ? CTRL_SM0_RAMP : CTRL_SM1_RAMP);
|
|
|
|
/*
|
|
* Only one supply is needed in u-boot. set both v1 and v2 to
|
|
* same value.
|
|
*
|
|
* When both v1 and v2 are set to same value, we just need to set
|
|
* control1 reg to trigger the supply selection.
|
|
*/
|
|
buff[0] = buff[1] = (uchar)data;
|
|
buff[2] = rate;
|
|
|
|
/* write v1, v2 and rate, then trigger */
|
|
if (tps6586x_write(reg, buff, 3) ||
|
|
tps6586x_write(SUPPLY_CONTROL1, &control_bit, 1))
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int calculate_next_voltage(int voltage, int target, int step)
|
|
{
|
|
int diff = voltage < target ? step : -step;
|
|
|
|
if (abs(target - voltage) > step)
|
|
voltage += diff;
|
|
else
|
|
voltage = target;
|
|
|
|
return voltage;
|
|
}
|
|
|
|
int tps6586x_set_pwm_mode(int mask)
|
|
{
|
|
uchar val;
|
|
int ret;
|
|
|
|
assert(tps6586x_dev);
|
|
ret = tps6586x_read(PFM_MODE);
|
|
if (ret != -1) {
|
|
val = (uchar)ret;
|
|
val |= mask;
|
|
|
|
ret = tps6586x_write(PFM_MODE, &val, 1);
|
|
}
|
|
|
|
if (ret == -1)
|
|
debug("%s: Failed to read/write PWM mode reg\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
|
|
int min_sm0_over_sm1)
|
|
{
|
|
int sm0, sm1;
|
|
int bad;
|
|
|
|
assert(tps6586x_dev);
|
|
|
|
/* get current voltage settings */
|
|
if (read_voltages(&sm0, &sm1)) {
|
|
debug("%s: Cannot read voltage settings\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* if vdd_core < vdd_cpu + rel
|
|
* skip
|
|
*
|
|
* This condition may happen when system reboots due to kernel crash.
|
|
*/
|
|
if (min_sm0_over_sm1 != -1 && sm0 < sm1 + min_sm0_over_sm1) {
|
|
debug("%s: SM0 is %d, SM1 is %d, but min_sm0_over_sm1 is %d\n",
|
|
__func__, sm0, sm1, min_sm0_over_sm1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Since vdd_core and vdd_cpu may both stand at either greater or less
|
|
* than their nominal voltage, the adjustment may go either directions.
|
|
*
|
|
* Make sure vdd_core is always higher than vdd_cpu with certain margin.
|
|
* So, find out which vdd to adjust first in each step.
|
|
*
|
|
* case 1: both sm0 and sm1 need to move up
|
|
* adjust sm0 before sm1
|
|
*
|
|
* case 2: both sm0 and sm1 need to move down
|
|
* adjust sm1 before sm0
|
|
*
|
|
* case 3: sm0 moves down and sm1 moves up
|
|
* adjusting either one first is fine.
|
|
*
|
|
* Adjust vdd_core and vdd_cpu one step at a time until they reach
|
|
* their nominal values.
|
|
*/
|
|
bad = 0;
|
|
while (!bad && (sm0 != sm0_target || sm1 != sm1_target)) {
|
|
int adjust_sm0_late = 0; /* flag to adjust vdd_core later */
|
|
|
|
debug("%d-%d %d-%d ", sm0, sm0_target, sm1, sm1_target);
|
|
|
|
if (sm0 != sm0_target) {
|
|
/*
|
|
* if case 1 and case 3, set new sm0 first.
|
|
* otherwise, hold down until new sm1 is set.
|
|
*/
|
|
sm0 = calculate_next_voltage(sm0, sm0_target, step);
|
|
if (sm1 < sm1_target)
|
|
bad |= set_voltage(SM0_VOLTAGE_V1, sm0, rate);
|
|
else
|
|
adjust_sm0_late = 1;
|
|
}
|
|
|
|
if (sm1 != sm1_target) {
|
|
sm1 = calculate_next_voltage(sm1, sm1_target, step);
|
|
bad |= set_voltage(SM1_VOLTAGE_V1, sm1, rate);
|
|
}
|
|
|
|
if (adjust_sm0_late)
|
|
bad |= set_voltage(SM0_VOLTAGE_V1, sm0, rate);
|
|
debug("%d\n", adjust_sm0_late);
|
|
}
|
|
debug("%d-%d %d-%d done\n", sm0, sm0_target, sm1, sm1_target);
|
|
|
|
return bad ? -EINVAL : 0;
|
|
}
|
|
|
|
int tps6586x_init(struct udevice *dev)
|
|
{
|
|
tps6586x_dev = dev;
|
|
|
|
return 0;
|
|
}
|