mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Vivek Gautam](/assets/img/avatar_default.png)
Macros defining bmRequestType field of USB device request, given in table 9.2 USB 2.0 spec, are rather generic macros which can be further used by other Host controller stacks. So moving them to usb_defs header. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Dan Murphy <dmurphy@ti.com> Cc: Marek Vasut <marex@denx.de>
290 lines
8.8 KiB
C
290 lines
8.8 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Denis Peter, MPL AG Switzerland
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Note: Part of this code has been derived from linux
|
|
*/
|
|
#ifndef _USB_DEFS_H_
|
|
#define _USB_DEFS_H_
|
|
|
|
/* USB constants */
|
|
|
|
/* Device and/or Interface Class codes */
|
|
#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
|
|
#define USB_CLASS_AUDIO 1
|
|
#define USB_CLASS_COMM 2
|
|
#define USB_CLASS_HID 3
|
|
#define USB_CLASS_PRINTER 7
|
|
#define USB_CLASS_MASS_STORAGE 8
|
|
#define USB_CLASS_HUB 9
|
|
#define USB_CLASS_DATA 10
|
|
#define USB_CLASS_VENDOR_SPEC 0xff
|
|
|
|
/* some HID sub classes */
|
|
#define USB_SUB_HID_NONE 0
|
|
#define USB_SUB_HID_BOOT 1
|
|
|
|
/* some UID Protocols */
|
|
#define USB_PROT_HID_NONE 0
|
|
#define USB_PROT_HID_KEYBOARD 1
|
|
#define USB_PROT_HID_MOUSE 2
|
|
|
|
|
|
/* Sub STORAGE Classes */
|
|
#define US_SC_RBC 1 /* Typically, flash devices */
|
|
#define US_SC_8020 2 /* CD-ROM */
|
|
#define US_SC_QIC 3 /* QIC-157 Tapes */
|
|
#define US_SC_UFI 4 /* Floppy */
|
|
#define US_SC_8070 5 /* Removable media */
|
|
#define US_SC_SCSI 6 /* Transparent */
|
|
#define US_SC_MIN US_SC_RBC
|
|
#define US_SC_MAX US_SC_SCSI
|
|
|
|
/* STORAGE Protocols */
|
|
#define US_PR_CB 1 /* Control/Bulk w/o interrupt */
|
|
#define US_PR_CBI 0 /* Control/Bulk/Interrupt */
|
|
#define US_PR_BULK 0x50 /* bulk only */
|
|
|
|
/* USB types */
|
|
#define USB_TYPE_STANDARD (0x00 << 5)
|
|
#define USB_TYPE_CLASS (0x01 << 5)
|
|
#define USB_TYPE_VENDOR (0x02 << 5)
|
|
#define USB_TYPE_RESERVED (0x03 << 5)
|
|
|
|
/* USB recipients */
|
|
#define USB_RECIP_DEVICE 0x00
|
|
#define USB_RECIP_INTERFACE 0x01
|
|
#define USB_RECIP_ENDPOINT 0x02
|
|
#define USB_RECIP_OTHER 0x03
|
|
|
|
/* USB directions */
|
|
#define USB_DIR_OUT 0
|
|
#define USB_DIR_IN 0x80
|
|
|
|
/*
|
|
* bmRequestType: USB Device Requests, table 9.2 USB 2.0 spec.
|
|
* (shifted) direction/type/recipient.
|
|
*/
|
|
#define DeviceRequest \
|
|
((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
|
|
|
|
#define DeviceOutRequest \
|
|
((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
|
|
|
|
#define InterfaceRequest \
|
|
((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
|
|
|
|
#define EndpointRequest \
|
|
((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
|
|
|
|
#define EndpointOutRequest \
|
|
((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
|
|
|
|
/* Descriptor types */
|
|
#define USB_DT_DEVICE 0x01
|
|
#define USB_DT_CONFIG 0x02
|
|
#define USB_DT_STRING 0x03
|
|
#define USB_DT_INTERFACE 0x04
|
|
#define USB_DT_ENDPOINT 0x05
|
|
|
|
#define USB_DT_HID (USB_TYPE_CLASS | 0x01)
|
|
#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02)
|
|
#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
|
|
#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
|
|
|
|
/* Descriptor sizes per descriptor type */
|
|
#define USB_DT_DEVICE_SIZE 18
|
|
#define USB_DT_CONFIG_SIZE 9
|
|
#define USB_DT_INTERFACE_SIZE 9
|
|
#define USB_DT_ENDPOINT_SIZE 7
|
|
#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
|
|
#define USB_DT_HUB_NONVAR_SIZE 7
|
|
#define USB_DT_HID_SIZE 9
|
|
|
|
/* Endpoints */
|
|
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
|
|
#define USB_ENDPOINT_DIR_MASK 0x80
|
|
|
|
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
|
|
#define USB_ENDPOINT_XFER_CONTROL 0
|
|
#define USB_ENDPOINT_XFER_ISOC 1
|
|
#define USB_ENDPOINT_XFER_BULK 2
|
|
#define USB_ENDPOINT_XFER_INT 3
|
|
|
|
/* USB Packet IDs (PIDs) */
|
|
#define USB_PID_UNDEF_0 0xf0
|
|
#define USB_PID_OUT 0xe1
|
|
#define USB_PID_ACK 0xd2
|
|
#define USB_PID_DATA0 0xc3
|
|
#define USB_PID_UNDEF_4 0xb4
|
|
#define USB_PID_SOF 0xa5
|
|
#define USB_PID_UNDEF_6 0x96
|
|
#define USB_PID_UNDEF_7 0x87
|
|
#define USB_PID_UNDEF_8 0x78
|
|
#define USB_PID_IN 0x69
|
|
#define USB_PID_NAK 0x5a
|
|
#define USB_PID_DATA1 0x4b
|
|
#define USB_PID_PREAMBLE 0x3c
|
|
#define USB_PID_SETUP 0x2d
|
|
#define USB_PID_STALL 0x1e
|
|
#define USB_PID_UNDEF_F 0x0f
|
|
|
|
/* Standard requests */
|
|
#define USB_REQ_GET_STATUS 0x00
|
|
#define USB_REQ_CLEAR_FEATURE 0x01
|
|
#define USB_REQ_SET_FEATURE 0x03
|
|
#define USB_REQ_SET_ADDRESS 0x05
|
|
#define USB_REQ_GET_DESCRIPTOR 0x06
|
|
#define USB_REQ_SET_DESCRIPTOR 0x07
|
|
#define USB_REQ_GET_CONFIGURATION 0x08
|
|
#define USB_REQ_SET_CONFIGURATION 0x09
|
|
#define USB_REQ_GET_INTERFACE 0x0A
|
|
#define USB_REQ_SET_INTERFACE 0x0B
|
|
#define USB_REQ_SYNCH_FRAME 0x0C
|
|
|
|
/* HID requests */
|
|
#define USB_REQ_GET_REPORT 0x01
|
|
#define USB_REQ_GET_IDLE 0x02
|
|
#define USB_REQ_GET_PROTOCOL 0x03
|
|
#define USB_REQ_SET_REPORT 0x09
|
|
#define USB_REQ_SET_IDLE 0x0A
|
|
#define USB_REQ_SET_PROTOCOL 0x0B
|
|
|
|
/* Device features */
|
|
#define USB_FEAT_HALT 0x00
|
|
#define USB_FEAT_WAKEUP 0x01
|
|
#define USB_FEAT_TEST 0x02
|
|
|
|
/* Test modes */
|
|
#define USB_TEST_MODE_J 0x01
|
|
#define USB_TEST_MODE_K 0x02
|
|
#define USB_TEST_MODE_SE0_NAK 0x03
|
|
#define USB_TEST_MODE_PACKET 0x04
|
|
#define USB_TEST_MODE_FORCE_ENABLE 0x05
|
|
|
|
|
|
/* "pipe" definitions */
|
|
|
|
#define PIPE_ISOCHRONOUS 0
|
|
#define PIPE_INTERRUPT 1
|
|
#define PIPE_CONTROL 2
|
|
#define PIPE_BULK 3
|
|
#define PIPE_DEVEP_MASK 0x0007ff00
|
|
|
|
#define USB_ISOCHRONOUS 0
|
|
#define USB_INTERRUPT 1
|
|
#define USB_CONTROL 2
|
|
#define USB_BULK 3
|
|
|
|
/* USB-status codes: */
|
|
#define USB_ST_ACTIVE 0x1 /* TD is active */
|
|
#define USB_ST_STALLED 0x2 /* TD is stalled */
|
|
#define USB_ST_BUF_ERR 0x4 /* buffer error */
|
|
#define USB_ST_BABBLE_DET 0x8 /* Babble detected */
|
|
#define USB_ST_NAK_REC 0x10 /* NAK Received*/
|
|
#define USB_ST_CRC_ERR 0x20 /* CRC/timeout Error */
|
|
#define USB_ST_BIT_ERR 0x40 /* Bitstuff error */
|
|
#define USB_ST_NOT_PROC 0x80000000L /* Not yet processed */
|
|
|
|
|
|
/*************************************************************************
|
|
* Hub defines
|
|
*/
|
|
|
|
/*
|
|
* Hub request types
|
|
*/
|
|
|
|
#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
|
|
#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
|
|
|
|
/*
|
|
* Hub Class feature numbers
|
|
*/
|
|
#define C_HUB_LOCAL_POWER 0
|
|
#define C_HUB_OVER_CURRENT 1
|
|
|
|
/*
|
|
* Port feature numbers
|
|
*/
|
|
#define USB_PORT_FEAT_CONNECTION 0
|
|
#define USB_PORT_FEAT_ENABLE 1
|
|
#define USB_PORT_FEAT_SUSPEND 2
|
|
#define USB_PORT_FEAT_OVER_CURRENT 3
|
|
#define USB_PORT_FEAT_RESET 4
|
|
#define USB_PORT_FEAT_POWER 8
|
|
#define USB_PORT_FEAT_LOWSPEED 9
|
|
#define USB_PORT_FEAT_HIGHSPEED 10
|
|
#define USB_PORT_FEAT_C_CONNECTION 16
|
|
#define USB_PORT_FEAT_C_ENABLE 17
|
|
#define USB_PORT_FEAT_C_SUSPEND 18
|
|
#define USB_PORT_FEAT_C_OVER_CURRENT 19
|
|
#define USB_PORT_FEAT_C_RESET 20
|
|
#define USB_PORT_FEAT_TEST 21
|
|
|
|
/*
|
|
* Changes to Port feature numbers for Super speed,
|
|
* from USB 3.0 spec Table 10-8
|
|
*/
|
|
#define USB_SS_PORT_FEAT_U1_TIMEOUT 23
|
|
#define USB_SS_PORT_FEAT_U2_TIMEOUT 24
|
|
#define USB_SS_PORT_FEAT_C_LINK_STATE 25
|
|
#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26
|
|
#define USB_SS_PORT_FEAT_BH_RESET 28
|
|
#define USB_SS_PORT_FEAT_C_BH_RESET 29
|
|
|
|
/* wPortStatus bits */
|
|
#define USB_PORT_STAT_CONNECTION 0x0001
|
|
#define USB_PORT_STAT_ENABLE 0x0002
|
|
#define USB_PORT_STAT_SUSPEND 0x0004
|
|
#define USB_PORT_STAT_OVERCURRENT 0x0008
|
|
#define USB_PORT_STAT_RESET 0x0010
|
|
#define USB_PORT_STAT_POWER 0x0100
|
|
#define USB_PORT_STAT_LOW_SPEED 0x0200
|
|
#define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */
|
|
#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */
|
|
#define USB_PORT_STAT_SPEED_MASK \
|
|
(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
|
|
|
|
/*
|
|
* Changes to wPortStatus bit field in USB 3.0
|
|
* See USB 3.0 spec Table 10-11
|
|
*/
|
|
#define USB_SS_PORT_STAT_LINK_STATE 0x01e0
|
|
#define USB_SS_PORT_STAT_POWER 0x0200
|
|
#define USB_SS_PORT_STAT_SPEED 0x1c00
|
|
#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000
|
|
|
|
/* wPortChange bits */
|
|
#define USB_PORT_STAT_C_CONNECTION 0x0001
|
|
#define USB_PORT_STAT_C_ENABLE 0x0002
|
|
#define USB_PORT_STAT_C_SUSPEND 0x0004
|
|
#define USB_PORT_STAT_C_OVERCURRENT 0x0008
|
|
#define USB_PORT_STAT_C_RESET 0x0010
|
|
|
|
/*
|
|
* Changes to wPortChange bit fields in USB 3.0
|
|
* See USB 3.0 spec Table 10-12
|
|
*/
|
|
#define USB_SS_PORT_STAT_C_BH_RESET 0x0020
|
|
#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040
|
|
#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080
|
|
|
|
/* wHubCharacteristics (masks) */
|
|
#define HUB_CHAR_LPSM 0x0003
|
|
#define HUB_CHAR_COMPOUND 0x0004
|
|
#define HUB_CHAR_OCPM 0x0018
|
|
|
|
/*
|
|
* Hub Status & Hub Change bit masks
|
|
*/
|
|
#define HUB_STATUS_LOCAL_POWER 0x0001
|
|
#define HUB_STATUS_OVERCURRENT 0x0002
|
|
|
|
#define HUB_CHANGE_LOCAL_POWER 0x0001
|
|
#define HUB_CHANGE_OVERCURRENT 0x0002
|
|
|
|
#endif /*_USB_DEFS_H_ */
|