Icenowy Zheng 3cfecee49c sunxi: set the default CPUx frequency of H5 to 816MHz ... Some H5 boards are designed to start at 1.1V CPUx voltage (e.g. Nano Pi NEO2), which may not work properly at 1008MHz if the chip's quality is not so good. Lower the default CPUx frequency of H5 to 816MHz. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@openedev.com>		2017-12-02 21:55:25 +05:30
..
cpu	arm64: support running at addr other than linked to	2017-11-17 07:44:13 -05:00
dts	sun50i: h5: Add NanoPi Neo Plus2 DT initial support	2017-11-21 19:11:57 +05:30
include	Add UART base addresses for additional UARTs	2017-11-17 10:53:45 -05:00
lib	armv8: update gd after relocate	2017-11-17 07:44:13 -05:00
mach-aspeed
mach-at91	Drop CONFIG_HAS_DATAFLASH	2017-10-16 09:42:51 -04:00
mach-bcm283x
mach-davinci
mach-exynos
mach-highbank
mach-imx	imx:display5: Add support for LWN's DISPLAY5 board	2017-11-09 11:32:49 +01:00
mach-integrator
mach-keystone
mach-kirkwood
mach-meson	arm: add initial support for Amlogic P212 based on Meson GXL family	2017-11-17 07:43:32 -05:00
mach-mvebu	arm: mvebu: Add board_setup for xhci hardware	2017-11-16 11:45:20 +01:00
mach-omap2	am33xx: Add a function to query MPU voltage in uV	2017-11-17 07:43:32 -05:00
mach-orion5x
mach-qemu	ARM: Add a new arch + board for QEMU's 'virt' machine	2017-10-06 11:28:16 -04:00
mach-rmobile	cosmetic: rmobile: renesas spelled wrong	2017-11-06 09:59:03 -05:00
mach-rockchip	rockchip: rk3328: fix rockchip_get_cru api	2017-11-01 11:21:32 +01:00
mach-s5pc1xx
mach-snapdragon
mach-socfpga	treewide: replace with error() with pr_err()	2017-10-04 11:59:44 -04:00
mach-sti
mach-stm32	stm32: fix STMicroelectronics copyright	2017-11-06 09:51:01 -05:00
mach-sunxi	sunxi: set the default CPUx frequency of H5 to 816MHz	2017-12-02 21:55:25 +05:30
mach-tegra	treewide: replace with error() with pr_err()	2017-10-04 11:59:44 -04:00
mach-uniphier	ARM: uniphier: use pr_*() more where appropriate	2017-10-23 01:09:22 +09:00
mach-versatile
mach-zynq
thumb1/include/asm/proc-armv
config.mk
Kconfig	arm64: support running at addr other than linked to	2017-11-17 07:44:13 -05:00
Kconfig.debug
Makefile