brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-06 11:16:15 +09:00
Code Issues Projects Releases Wiki Activity
3ceb5118c6
u-boot-brain/board/udoo
History
Breno Lima 3aa4b703b4 imx: imx6: Move gpr_init() function to soc.c 
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-28 09:48:53 +02:00
..
neo env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
Kconfig mx6: remove SYS_SOC from board Kconfig 2015-09-13 10:37:29 +02:00
MAINTAINERS MAINTAINERS/mailmap: Update my email address 2016-01-11 11:22:43 -05:00
Makefile udoo: Switch to SPL support 2015-09-02 15:25:28 +02:00
README udoo: Add a README file 2016-10-06 09:40:34 +02:00
udoo_spl.c imx: imx6: Move gpr_init() function to soc.c 2017-08-28 09:48:53 +02:00
udoo.c env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00

README 

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.