mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
01d142850e
On STi 96boards, configure by default the micro USB connector (managed by DWC3 hardware block) in peripheral mode. This will allow to use fastboot feature. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
979 lines
24 KiB
Plaintext
979 lines
24 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 STMicroelectronics Limited.
|
|
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
#include "stih407-pinctrl.dtsi"
|
|
#include <dt-bindings/mfd/st-lpc.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/reset/stih407-resets.h>
|
|
#include <dt-bindings/interrupt-controller/irq-st.h>
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dmu_reserved: rproc@44000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x44000000 0x01000000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
|
|
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
|
|
cpu-release-addr = <0x94100A4>;
|
|
|
|
/* kHz uV */
|
|
operating-points = <1500000 0
|
|
1200000 0
|
|
800000 0
|
|
500000 0>;
|
|
|
|
clocks = <&clk_m_a9>;
|
|
clock-names = "cpu";
|
|
clock-latency = <100000>;
|
|
st,syscfg = <&syscfg_core 0x8e0>;
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
|
|
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
|
|
cpu-release-addr = <0x94100A4>;
|
|
|
|
/* kHz uV */
|
|
operating-points = <1500000 0
|
|
1200000 0
|
|
800000 0
|
|
500000 0>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@08761000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
|
|
};
|
|
|
|
scu@08760000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x08760000 0x1000>;
|
|
};
|
|
|
|
timer@08760200 {
|
|
interrupt-parent = <&intc>;
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x08760200 0x100>;
|
|
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&arm_periph_clk>;
|
|
};
|
|
|
|
l2: cache-controller {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x08762000 0x1000>;
|
|
arm,data-latency = <3 3 3>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
arm-pmu {
|
|
interrupt-parent = <&intc>;
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pwm_regulator: pwm-regulator {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm1 3 8448>;
|
|
regulator-name = "CPU_1V0_AVS";
|
|
regulator-min-microvolt = <784000>;
|
|
regulator-max-microvolt = <1299000>;
|
|
regulator-always-on;
|
|
max-duty-cycle = <255>;
|
|
status = "okay";
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
restart {
|
|
compatible = "st,stih407-restart";
|
|
st,syscfg = <&syscfg_sbc_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
powerdown: powerdown-controller {
|
|
compatible = "st,stih407-powerdown";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
softreset: softreset-controller {
|
|
compatible = "st,stih407-softreset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
picophyreset: picophyreset-controller {
|
|
compatible = "st,stih407-picophyreset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
syscfg_sbc: sbc-syscfg@9620000 {
|
|
compatible = "st,stih407-sbc-syscfg", "syscon";
|
|
reg = <0x9620000 0x1000>;
|
|
};
|
|
|
|
syscfg_front: front-syscfg@9280000 {
|
|
compatible = "st,stih407-front-syscfg", "syscon";
|
|
reg = <0x9280000 0x1000>;
|
|
};
|
|
|
|
syscfg_rear: rear-syscfg@9290000 {
|
|
compatible = "st,stih407-rear-syscfg", "syscon";
|
|
reg = <0x9290000 0x1000>;
|
|
};
|
|
|
|
syscfg_flash: flash-syscfg@92a0000 {
|
|
compatible = "st,stih407-flash-syscfg", "syscon";
|
|
reg = <0x92a0000 0x1000>;
|
|
};
|
|
|
|
syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
|
|
compatible = "st,stih407-sbc-reg-syscfg", "syscon";
|
|
reg = <0x9600000 0x1000>;
|
|
};
|
|
|
|
syscfg_core: core-syscfg@92b0000 {
|
|
compatible = "st,stih407-core-syscfg", "syscon";
|
|
reg = <0x92b0000 0x1000>;
|
|
};
|
|
|
|
syscfg_lpm: lpm-syscfg@94b5100 {
|
|
compatible = "st,stih407-lpm-syscfg", "syscon";
|
|
reg = <0x94b5100 0x1000>;
|
|
};
|
|
|
|
irq-syscfg {
|
|
compatible = "st,stih407-irq-syscfg";
|
|
st,syscfg = <&syscfg_core>;
|
|
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
|
|
<ST_IRQ_SYSCFG_PMU_1>;
|
|
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
|
|
<ST_IRQ_SYSCFG_DISABLED>;
|
|
};
|
|
|
|
/* Display */
|
|
vtg_main: sti-vtg-main@8d02800 {
|
|
compatible = "st,vtg";
|
|
reg = <0x8d02800 0x200>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
vtg_aux: sti-vtg-aux@8d00200 {
|
|
compatible = "st,vtg";
|
|
reg = <0x8d00200 0x100>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
serial@9830000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9830000 0x2c>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial0>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9831000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9831000 0x2c>;
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial1>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9832000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9832000 0x2c>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial2>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SBC_ASC0 - UART10 */
|
|
sbc_serial0: serial@9530000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9530000 0x2c>;
|
|
interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_serial0>;
|
|
clocks = <&clk_sysin>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9531000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9531000 0x2c>;
|
|
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_serial1>;
|
|
clocks = <&clk_sysin>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9840000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x9840000 0x110>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9841000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9841000 0x110>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9842000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9842000 0x110>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9843000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9843000 0x110>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9844000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9844000 0x110>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9845000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9845000 0x110>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c5_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
/* SSCs on SBC */
|
|
i2c@9540000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9540000 0x110>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c10_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9541000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9541000 0x110>;
|
|
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c11_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2_picophy0: phy1 {
|
|
compatible = "st,stih407-usb2-phy";
|
|
#phy-cells = <0>;
|
|
st,syscfg = <&syscfg_core 0x100 0xf4>;
|
|
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
|
<&picophyreset STIH407_PICOPHY2_RESET>;
|
|
reset-names = "global", "port";
|
|
};
|
|
|
|
miphy28lp_phy: miphy28lp@9b22000 {
|
|
compatible = "st,miphy28lp-phy";
|
|
st,syscfg = <&syscfg_core>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
phy_port0: port@9b22000 {
|
|
reg = <0x9b22000 0xff>,
|
|
<0x9b09000 0xff>,
|
|
<0x9b04000 0xff>;
|
|
reg-names = "sata-up",
|
|
"pcie-up",
|
|
"pipew";
|
|
|
|
st,syscfg = <0x114 0x818 0xe0 0xec>;
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
|
|
};
|
|
|
|
phy_port1: port@9b2a000 {
|
|
reg = <0x9b2a000 0xff>,
|
|
<0x9b19000 0xff>,
|
|
<0x9b14000 0xff>;
|
|
reg-names = "sata-up",
|
|
"pcie-up",
|
|
"pipew";
|
|
|
|
st,syscfg = <0x118 0x81c 0xe4 0xf0>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
|
|
};
|
|
|
|
phy_port2: port@8f95000 {
|
|
reg = <0x8f95000 0xff>,
|
|
<0x8f90000 0xff>;
|
|
reg-names = "pipew",
|
|
"usb3-up";
|
|
|
|
st,syscfg = <0x11c 0x820>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
|
|
};
|
|
};
|
|
|
|
spi@9840000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9840000 0x110>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-0 = <&pinctrl_spi0_default>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9841000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9841000 0x110>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9842000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9842000 0x110>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi2_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9843000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9843000 0x110>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi3_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9844000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9844000 0x110>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi4_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SBC SSC */
|
|
spi@9540000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9540000 0x110>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi10_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9541000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9541000 0x110>;
|
|
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi11_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9542000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9542000 0x110>;
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi12_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc0: sdhci@09060000 {
|
|
compatible = "st,sdhci-stih407", "st,sdhci";
|
|
status = "disabled";
|
|
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
|
|
reg-names = "mmc", "top-mmc-delay";
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
|
|
interrupt-names = "mmcirq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc0>;
|
|
clock-names = "mmc", "icn";
|
|
clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
|
|
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
mmc1: sdhci@09080000 {
|
|
compatible = "st,sdhci-stih407", "st,sdhci";
|
|
status = "disabled";
|
|
reg = <0x09080000 0x7ff>;
|
|
reg-names = "mmc";
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
|
|
interrupt-names = "mmcirq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sd1>;
|
|
clock-names = "mmc", "icn";
|
|
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
|
|
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
|
|
resets = <&softreset STIH407_MMC1_SOFTRESET>;
|
|
reset-names = "softreset";
|
|
bus-width = <4>;
|
|
};
|
|
|
|
/* Watchdog and Real-Time Clock */
|
|
lpc@8787000 {
|
|
compatible = "st,stih407-lpc";
|
|
reg = <0x8787000 0x1000>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
|
|
timeout-sec = <120>;
|
|
st,syscfg = <&syscfg_core>;
|
|
st,lpc-mode = <ST_LPC_MODE_WDT>;
|
|
};
|
|
|
|
lpc@8788000 {
|
|
compatible = "st,stih407-lpc";
|
|
reg = <0x8788000 0x1000>;
|
|
interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
|
|
st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
|
|
};
|
|
|
|
sata0: sata@9b20000 {
|
|
compatible = "st,ahci";
|
|
reg = <0x9b20000 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
|
|
interrupt-names = "hostc";
|
|
|
|
phys = <&phy_port0 PHY_TYPE_SATA>;
|
|
phy-names = "ahci_phy";
|
|
|
|
resets = <&powerdown STIH407_SATA0_POWERDOWN>,
|
|
<&softreset STIH407_SATA0_SOFTRESET>,
|
|
<&softreset STIH407_SATA0_PWR_SOFTRESET>;
|
|
reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
|
|
|
|
clock-names = "ahci_clk";
|
|
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
|
|
|
|
ports-implemented = <0x1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sata1: sata@9b28000 {
|
|
compatible = "st,ahci";
|
|
reg = <0x9b28000 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
|
|
interrupt-names = "hostc";
|
|
|
|
phys = <&phy_port1 PHY_TYPE_SATA>;
|
|
phy-names = "ahci_phy";
|
|
|
|
resets = <&powerdown STIH407_SATA1_POWERDOWN>,
|
|
<&softreset STIH407_SATA1_SOFTRESET>,
|
|
<&softreset STIH407_SATA1_PWR_SOFTRESET>;
|
|
reset-names = "pwr-dwn",
|
|
"sw-rst",
|
|
"pwr-rst";
|
|
|
|
clock-names = "ahci_clk";
|
|
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
|
|
|
|
ports-implemented = <0x1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
st_dwc3: dwc3@8f94000 {
|
|
compatible = "st,stih407-dwc3";
|
|
reg = <0x08f94000 0x1000>, <0x110 0x4>;
|
|
reg-names = "reg-glue", "syscfg-reg";
|
|
st,syscfg = <&syscfg_core>;
|
|
resets = <&powerdown STIH407_USB3_POWERDOWN>,
|
|
<&softreset STIH407_MIPHY2_SOFTRESET>;
|
|
reset-names = "powerdown", "softreset";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb3>;
|
|
ranges;
|
|
|
|
status = "disabled";
|
|
|
|
dwc3: dwc3@9900000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x09900000 0x100000>;
|
|
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
|
|
dr_mode = "peripheral";
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
phys = <&usb2_picophy0>,
|
|
<&phy_port2 PHY_TYPE_USB3>;
|
|
};
|
|
};
|
|
|
|
/* COMMS PWM Module */
|
|
pwm0: pwm@9810000 {
|
|
compatible = "st,sti-pwm";
|
|
#pwm-cells = <2>;
|
|
reg = <0x9810000 0x68>;
|
|
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
|
|
clock-names = "pwm";
|
|
clocks = <&clk_sysin>;
|
|
st,pwm-num-chan = <1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SBC PWM Module */
|
|
pwm1: pwm@9510000 {
|
|
compatible = "st,sti-pwm";
|
|
#pwm-cells = <2>;
|
|
reg = <0x9510000 0x68>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1_chan0_default
|
|
&pinctrl_pwm1_chan1_default
|
|
&pinctrl_pwm1_chan2_default
|
|
&pinctrl_pwm1_chan3_default>;
|
|
clock-names = "pwm";
|
|
clocks = <&clk_sysin>;
|
|
st,pwm-num-chan = <4>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
rng10: rng@08a89000 {
|
|
compatible = "st,rng";
|
|
reg = <0x08a89000 0x1000>;
|
|
clocks = <&clk_sysin>;
|
|
status = "okay";
|
|
};
|
|
|
|
rng11: rng@08a8a000 {
|
|
compatible = "st,rng";
|
|
reg = <0x08a8a000 0x1000>;
|
|
clocks = <&clk_sysin>;
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet0: dwmac@9630000 {
|
|
device_type = "network";
|
|
status = "disabled";
|
|
compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
|
|
reg = <0x9630000 0x8000>, <0x80 0x4>;
|
|
reg-names = "stmmaceth", "sti-ethconf";
|
|
|
|
st,syscon = <&syscfg_sbc_reg 0x80>;
|
|
st,gmac_en;
|
|
resets = <&softreset STIH407_ETH1_SOFTRESET>;
|
|
reset-names = "stmmaceth";
|
|
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
|
interrupt-names = "macirq", "eth_wake_irq";
|
|
|
|
/* DMA Bus Mode */
|
|
snps,pbl = <8>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rgmii1>;
|
|
|
|
clock-names = "stmmaceth", "sti-ethclk";
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_ETH_PHY>;
|
|
};
|
|
|
|
cec: sti-cec@094a087c {
|
|
compatible = "st,stih-cec";
|
|
reg = <0x94a087c 0x64>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "cec-clk";
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
|
|
interrupt-names = "cec-irq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_cec0_default>;
|
|
resets = <&softreset STIH407_LPM_SOFTRESET>;
|
|
};
|
|
|
|
rng10: rng@08a89000 {
|
|
compatible = "st,rng";
|
|
reg = <0x08a89000 0x1000>;
|
|
clocks = <&clk_sysin>;
|
|
status = "okay";
|
|
};
|
|
|
|
rng11: rng@08a8a000 {
|
|
compatible = "st,rng";
|
|
reg = <0x08a8a000 0x1000>;
|
|
clocks = <&clk_sysin>;
|
|
status = "okay";
|
|
};
|
|
|
|
mailbox0: mailbox@8f00000 {
|
|
compatible = "st,stih407-mailbox";
|
|
reg = <0x8f00000 0x1000>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
|
|
#mbox-cells = <2>;
|
|
mbox-name = "a9";
|
|
status = "okay";
|
|
};
|
|
|
|
mailbox1: mailbox@8f01000 {
|
|
compatible = "st,stih407-mailbox";
|
|
reg = <0x8f01000 0x1000>;
|
|
#mbox-cells = <2>;
|
|
mbox-name = "st231_gp_1";
|
|
status = "okay";
|
|
};
|
|
|
|
mailbox2: mailbox@8f02000 {
|
|
compatible = "st,stih407-mailbox";
|
|
reg = <0x8f02000 0x1000>;
|
|
#mbox-cells = <2>;
|
|
mbox-name = "st231_gp_0";
|
|
status = "okay";
|
|
};
|
|
|
|
mailbox3: mailbox@8f03000 {
|
|
compatible = "st,stih407-mailbox";
|
|
reg = <0x8f03000 0x1000>;
|
|
#mbox-cells = <2>;
|
|
mbox-name = "st231_audio_video";
|
|
status = "okay";
|
|
};
|
|
|
|
st231_delta: st231-delta@44000000 {
|
|
compatible = "st,st231-rproc";
|
|
memory-region = <&dmu_reserved>;
|
|
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
|
|
reset-names = "sw_reset";
|
|
clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
|
|
clock-frequency = <600000000>;
|
|
st,syscfg = <&syscfg_core 0x224>;
|
|
#mbox-cells = <1>;
|
|
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
|
|
mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
|
|
};
|
|
|
|
/* fdma audio */
|
|
fdma0: dma-controller@8e20000 {
|
|
compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
|
|
reg = <0x8e20000 0x8000>,
|
|
<0x8e30000 0x3000>,
|
|
<0x8e37000 0x1000>,
|
|
<0x8e38000 0x8000>;
|
|
reg-names = "slimcore", "dmem", "peripherals", "imem";
|
|
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
|
|
dma-channels = <16>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
/* fdma app */
|
|
fdma1: dma-controller@8e40000 {
|
|
compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
|
|
reg = <0x8e40000 0x8000>,
|
|
<0x8e50000 0x3000>,
|
|
<0x8e57000 0x1000>,
|
|
<0x8e58000 0x8000>;
|
|
reg-names = "slimcore", "dmem", "peripherals", "imem";
|
|
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
|
|
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
|
|
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
|
|
dma-channels = <16>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
/* fdma free running */
|
|
fdma2: dma-controller@8e60000 {
|
|
compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
|
|
reg = <0x8e60000 0x8000>,
|
|
<0x8e70000 0x3000>,
|
|
<0x8e77000 0x1000>,
|
|
<0x8e78000 0x8000>;
|
|
reg-names = "slimcore", "dmem", "peripherals", "imem";
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
|
|
dma-channels = <16>;
|
|
#dma-cells = <3>;
|
|
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
};
|
|
|
|
sti_sasg_codec: sti-sasg-codec {
|
|
compatible = "st,stih407-sas-codec";
|
|
#sound-dai-cells = <1>;
|
|
status = "disabled";
|
|
st,syscfg = <&syscfg_core>;
|
|
};
|
|
|
|
sti_uni_player0: sti-uni-player@8d80000 {
|
|
compatible = "st,stih407-uni-player-hdmi";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
|
|
assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
|
|
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
|
|
assigned-clock-rates = <50000000>;
|
|
reg = <0x8d80000 0x158>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 2 0 1>;
|
|
dma-names = "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sti_uni_player1: sti-uni-player@8d81000 {
|
|
compatible = "st,stih407-uni-player-pcm-out";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
|
|
assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
|
|
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
|
|
assigned-clock-rates = <50000000>;
|
|
reg = <0x8d81000 0x158>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 3 0 1>;
|
|
dma-names = "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sti_uni_player2: sti-uni-player@8d82000 {
|
|
compatible = "st,stih407-uni-player-dac";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
|
|
assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
|
|
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
|
|
assigned-clock-rates = <50000000>;
|
|
reg = <0x8d82000 0x158>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 4 0 1>;
|
|
dma-names = "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sti_uni_player3: sti-uni-player@8d85000 {
|
|
compatible = "st,stih407-uni-player-spdif";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
|
|
assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
|
|
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
|
|
assigned-clock-rates = <50000000>;
|
|
reg = <0x8d85000 0x158>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 7 0 1>;
|
|
dma-names = "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sti_uni_reader0: sti-uni-reader@8d83000 {
|
|
compatible = "st,stih407-uni-reader-pcm_in";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
reg = <0x8d83000 0x158>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 5 0 1>;
|
|
dma-names = "rx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sti_uni_reader1: sti-uni-reader@8d84000 {
|
|
compatible = "st,stih407-uni-reader-hdmi";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
reg = <0x8d84000 0x158>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 6 0 1>;
|
|
dma-names = "rx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
rc: rc@09518000 {
|
|
compatible = "st,comms-irb";
|
|
reg = <0x09518000 0x234>;
|
|
interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
|
|
rx-mode = "infrared";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ir
|
|
&pinctrl_uhf
|
|
&pinctrl_tx
|
|
&pinctrl_tx_od>;
|
|
clocks = <&clk_sysin>;
|
|
resets = <&softreset STIH407_IRB_SOFTRESET>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
socinfo {
|
|
compatible = "st,stih407-socinfo";
|
|
st,syscfg = <&syscfg_core>;
|
|
};
|
|
};
|
|
};
|