mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Stefano Babic](/assets/img/avatar_default.png)
commit 0edf8b5b2f
breaks
building on a different directory with the O= parameter.
The patch wil fix this issue, generating always asm-offsets.h before
the other targets.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Wolfgang Denk <wd@denx.de>
365 lines
8.1 KiB
ArmAsm
365 lines
8.1 KiB
ArmAsm
/*
|
|
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
|
*
|
|
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <generated/asm-offsets.h>
|
|
#include "mx35pdk.h"
|
|
|
|
/*
|
|
* return soc version
|
|
* 0x10: TO1
|
|
* 0x20: TO2
|
|
* 0x30: TO3
|
|
*/
|
|
.macro check_soc_version ret, tmp
|
|
ldr \tmp, =IIM_BASE_ADDR
|
|
ldr \ret, [\tmp, #IIM_SREV]
|
|
cmp \ret, #0x00
|
|
moveq \tmp, #ROMPATCH_REV
|
|
ldreq \ret, [\tmp]
|
|
moveq \ret, \ret, lsl #4
|
|
addne \ret, \ret, #0x10
|
|
.endm
|
|
|
|
/*
|
|
* AIPS setup - Only setup MPROTx registers.
|
|
* The PACR default values are good.
|
|
*/
|
|
.macro init_aips
|
|
/*
|
|
* Set all MPROTx to be non-bufferable, trusted for R/W,
|
|
* not forced to user-mode.
|
|
*/
|
|
ldr r0, =AIPS1_BASE_ADDR
|
|
ldr r1, =AIPS_MPR_CONFIG
|
|
str r1, [r0, #0x00]
|
|
str r1, [r0, #0x04]
|
|
ldr r0, =AIPS2_BASE_ADDR
|
|
str r1, [r0, #0x00]
|
|
str r1, [r0, #0x04]
|
|
|
|
/*
|
|
* Clear the on and off peripheral modules Supervisor Protect bit
|
|
* for SDMA to access them. Did not change the AIPS control registers
|
|
* (offset 0x20) access type
|
|
*/
|
|
ldr r0, =AIPS1_BASE_ADDR
|
|
ldr r1, =AIPS_OPACR_CONFIG
|
|
str r1, [r0, #0x40]
|
|
str r1, [r0, #0x44]
|
|
str r1, [r0, #0x48]
|
|
str r1, [r0, #0x4C]
|
|
str r1, [r0, #0x50]
|
|
ldr r0, =AIPS2_BASE_ADDR
|
|
str r1, [r0, #0x40]
|
|
str r1, [r0, #0x44]
|
|
str r1, [r0, #0x48]
|
|
str r1, [r0, #0x4C]
|
|
str r1, [r0, #0x50]
|
|
.endm
|
|
|
|
/* MAX (Multi-Layer AHB Crossbar Switch) setup */
|
|
.macro init_max
|
|
ldr r0, =MAX_BASE_ADDR
|
|
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
|
|
ldr r1, =MAX_MPR_CONFIG
|
|
str r1, [r0, #0x000] /* for S0 */
|
|
str r1, [r0, #0x100] /* for S1 */
|
|
str r1, [r0, #0x200] /* for S2 */
|
|
str r1, [r0, #0x300] /* for S3 */
|
|
str r1, [r0, #0x400] /* for S4 */
|
|
/* SGPCR - always park on last master */
|
|
ldr r1, =MAX_SGPCR_CONFIG
|
|
str r1, [r0, #0x010] /* for S0 */
|
|
str r1, [r0, #0x110] /* for S1 */
|
|
str r1, [r0, #0x210] /* for S2 */
|
|
str r1, [r0, #0x310] /* for S3 */
|
|
str r1, [r0, #0x410] /* for S4 */
|
|
/* MGPCR - restore default values */
|
|
ldr r1, =MAX_MGPCR_CONFIG
|
|
str r1, [r0, #0x800] /* for M0 */
|
|
str r1, [r0, #0x900] /* for M1 */
|
|
str r1, [r0, #0xA00] /* for M2 */
|
|
str r1, [r0, #0xB00] /* for M3 */
|
|
str r1, [r0, #0xC00] /* for M4 */
|
|
str r1, [r0, #0xD00] /* for M5 */
|
|
.endm
|
|
|
|
/* M3IF setup */
|
|
.macro init_m3if
|
|
/* Configure M3IF registers */
|
|
ldr r1, =M3IF_BASE_ADDR
|
|
/*
|
|
* M3IF Control Register (M3IFCTL)
|
|
* MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
|
|
* MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
|
|
* MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
|
|
* ------------
|
|
* 0x00000040
|
|
*/
|
|
ldr r0, =M3IF_CONFIG
|
|
str r0, [r1] /* M3IF control reg */
|
|
.endm
|
|
|
|
/* CPLD on CS5 setup */
|
|
.macro init_debug_board
|
|
ldr r0, =DBG_BASE_ADDR
|
|
ldr r1, =DBG_CSCR_U_CONFIG
|
|
str r1, [r0, #0x00]
|
|
ldr r1, =DBG_CSCR_L_CONFIG
|
|
str r1, [r0, #0x04]
|
|
ldr r1, =DBG_CSCR_A_CONFIG
|
|
str r1, [r0, #0x08]
|
|
.endm
|
|
|
|
/* clock setup */
|
|
.macro init_clock
|
|
ldr r0, =CCM_BASE_ADDR
|
|
|
|
/* default CLKO to 1/32 of the ARM core*/
|
|
ldr r1, [r0, #CLKCTL_COSR]
|
|
bic r1, r1, #0x00000FF00
|
|
bic r1, r1, #0x0000000FF
|
|
mov r2, #0x00006C00
|
|
add r2, r2, #0x67
|
|
orr r1, r1, r2
|
|
str r1, [r0, #CLKCTL_COSR]
|
|
|
|
ldr r2, =CCM_CCMR_CONFIG
|
|
str r2, [r0, #CLKCTL_CCMR]
|
|
|
|
check_soc_version r1, r2
|
|
cmp r1, #CHIP_REV_2_0
|
|
ldrhs r3, =CCM_MPLL_532_HZ
|
|
bhs 1f
|
|
ldr r2, [r0, #CLKCTL_PDR0]
|
|
tst r2, #CLKMODE_CONSUMER
|
|
ldrne r3, =CCM_MPLL_532_HZ /* consumer path*/
|
|
ldreq r3, =CCM_MPLL_399_HZ /* auto path*/
|
|
1:
|
|
str r3, [r0, #CLKCTL_MPCTL]
|
|
|
|
ldr r1, =CCM_PPLL_300_HZ
|
|
str r1, [r0, #CLKCTL_PPCTL]
|
|
|
|
ldr r1, =CCM_PDR0_CONFIG
|
|
bic r1, r1, #0x800000
|
|
str r1, [r0, #CLKCTL_PDR0]
|
|
|
|
ldr r1, [r0, #CLKCTL_CGR0]
|
|
orr r1, r1, #0x0C300000
|
|
str r1, [r0, #CLKCTL_CGR0]
|
|
|
|
ldr r1, [r0, #CLKCTL_CGR1]
|
|
orr r1, r1, #0x00000C00
|
|
orr r1, r1, #0x00000003
|
|
str r1, [r0, #CLKCTL_CGR1]
|
|
.endm
|
|
|
|
.macro setup_sdram
|
|
ldr r0, =ESDCTL_BASE_ADDR
|
|
mov r3, #0x2000
|
|
str r3, [r0, #0x0]
|
|
str r3, [r0, #0x8]
|
|
|
|
/*ip(r12) has used to save lr register in upper calling*/
|
|
mov fp, lr
|
|
|
|
mov r5, #0x00
|
|
mov r2, #0x00
|
|
mov r1, #CSD0_BASE_ADDR
|
|
bl setup_sdram_bank
|
|
|
|
mov r5, #0x00
|
|
mov r2, #0x00
|
|
mov r1, #CSD1_BASE_ADDR
|
|
bl setup_sdram_bank
|
|
|
|
mov lr, fp
|
|
|
|
1:
|
|
ldr r3, =ESDCTL_DELAY_LINE5
|
|
str r3, [r0, #0x30]
|
|
.endm
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
mov r10, lr
|
|
|
|
mrc 15, 0, r1, c1, c0, 0
|
|
|
|
mrc 15, 0, r0, c1, c0, 1
|
|
orr r0, r0, #7
|
|
mcr 15, 0, r0, c1, c0, 1
|
|
orr r1, r1, #(1<<11)
|
|
|
|
/* Set unaligned access enable */
|
|
orr r1, r1, #(1<<22)
|
|
|
|
/* Set low int latency enable */
|
|
orr r1, r1, #(1<<21)
|
|
|
|
mcr 15, 0, r1, c1, c0, 0
|
|
|
|
mov r0, #0
|
|
|
|
/* Set branch prediction enable */
|
|
mcr 15, 0, r0, c15, c2, 4
|
|
|
|
mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
|
|
mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
|
|
mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
|
|
|
|
/*
|
|
* initializes very early AIPS
|
|
* Then it also initializes Multi-Layer AHB Crossbar Switch,
|
|
* M3IF
|
|
* Also setup the Peripheral Port Remap register inside the core
|
|
*/
|
|
ldr r0, =0x40000015 /* start from AIPS 2GB region */
|
|
mcr p15, 0, r0, c15, c2, 4
|
|
|
|
init_aips
|
|
|
|
init_max
|
|
|
|
init_m3if
|
|
|
|
init_clock
|
|
init_debug_board
|
|
|
|
cmp pc, #PHYS_SDRAM_1
|
|
blo init_sdram_start
|
|
cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
|
|
blo skip_sdram_setup
|
|
|
|
init_sdram_start:
|
|
/*init_sdram*/
|
|
setup_sdram
|
|
|
|
skip_sdram_setup:
|
|
mov lr, r10
|
|
mov pc, lr
|
|
|
|
|
|
/*
|
|
* r0: ESDCTL control base, r1: sdram slot base
|
|
* r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base
|
|
*/
|
|
setup_sdram_bank:
|
|
mov r3, #0xE
|
|
tst r2, #0x1
|
|
orreq r3, r3, #0x300 /*DDR2*/
|
|
str r3, [r0, #0x10]
|
|
bic r3, r3, #0x00A
|
|
str r3, [r0, #0x10]
|
|
beq 2f
|
|
|
|
mov r3, #0x20000
|
|
1: subs r3, r3, #1
|
|
bne 1b
|
|
|
|
2: tst r2, #0x1
|
|
ldreq r3, =ESDCTL_DDR2_CONFIG
|
|
ldrne r3, =ESDCTL_MDDR_CONFIG
|
|
cmp r1, #CSD1_BASE_ADDR
|
|
strlo r3, [r0, #0x4]
|
|
strhs r3, [r0, #0xC]
|
|
|
|
ldr r3, =ESDCTL_0x92220000
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
mov r3, #0xDA
|
|
ldr r4, =ESDCTL_PRECHARGE
|
|
strb r3, [r1, r4]
|
|
|
|
tst r2, #0x1
|
|
bne skip_set_mode
|
|
|
|
cmp r1, #CSD1_BASE_ADDR
|
|
ldr r3, =ESDCTL_0xB2220000
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
mov r3, #0xDA
|
|
ldr r4, =ESDCTL_DDR2_EMR2
|
|
strb r3, [r1, r4]
|
|
ldr r4, =ESDCTL_DDR2_EMR3
|
|
strb r3, [r1, r4]
|
|
ldr r4, =ESDCTL_DDR2_EN_DLL
|
|
strb r3, [r1, r4]
|
|
ldr r4, =ESDCTL_DDR2_RESET_DLL
|
|
strb r3, [r1, r4]
|
|
|
|
ldr r3, =ESDCTL_0x92220000
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
mov r3, #0xDA
|
|
ldr r4, =ESDCTL_PRECHARGE
|
|
strb r3, [r1, r4]
|
|
|
|
skip_set_mode:
|
|
cmp r1, #CSD1_BASE_ADDR
|
|
ldr r3, =ESDCTL_0xA2220000
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
mov r3, #0xDA
|
|
strb r3, [r1]
|
|
strb r3, [r1]
|
|
|
|
ldr r3, =ESDCTL_0xB2220000
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
tst r2, #0x1
|
|
ldreq r4, =ESDCTL_DDR2_MR
|
|
ldrne r4, =ESDCTL_MDDR_MR
|
|
mov r3, #0xDA
|
|
strb r3, [r1, r4]
|
|
ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT
|
|
streqb r3, [r1, r4]
|
|
ldreq r4, =ESDCTL_DDR2_EN_DLL
|
|
ldrne r4, =ESDCTL_MDDR_EMR
|
|
strb r3, [r1, r4]
|
|
|
|
cmp r1, #CSD1_BASE_ADDR
|
|
ldr r3, =ESDCTL_0x82228080
|
|
strlo r3, [r0, #0x0]
|
|
strhs r3, [r0, #0x8]
|
|
|
|
tst r2, #0x1
|
|
moveq r4, #0x20000
|
|
movne r4, #0x200
|
|
1: subs r4, r4, #1
|
|
bne 1b
|
|
|
|
str r3, [r1, #0x100]
|
|
ldr r4, [r1, #0x100]
|
|
cmp r3, r4
|
|
movne r3, #1
|
|
moveq r3, #0
|
|
|
|
mov pc, lr
|