mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-10 14:53:26 +09:00
![Jaehoon Chung](/assets/img/avatar_default.png)
Remove the board_power_init() function. It will be initialized with device-tree. In future, it will be controlled with regulator API. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
340 lines
7.5 KiB
C
340 lines
7.5 KiB
C
/*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved.
|
|
* Sanghee Kim <sh0130.kim@samsung.com>
|
|
* Piotr Wilczek <p.wilczek@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <lcd.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/arch/mipi_dsim.h>
|
|
#include <power/pmic.h>
|
|
#include <power/max77686_pmic.h>
|
|
#include <power/battery.h>
|
|
#include <power/max77693_pmic.h>
|
|
#include <power/max77693_muic.h>
|
|
#include <power/max77693_fg.h>
|
|
#include <libtizen.h>
|
|
#include <errno.h>
|
|
#include <usb.h>
|
|
#include <usb/dwc2_udc.h>
|
|
#include <usb_mass_storage.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static unsigned int board_rev = -1;
|
|
|
|
static inline u32 get_model_rev(void);
|
|
|
|
static void check_hw_revision(void)
|
|
{
|
|
int modelrev = 0;
|
|
char str[12];
|
|
int i;
|
|
|
|
/*
|
|
* GPM1[1:0]: MODEL_REV[1:0]
|
|
* Don't set as pull-none for these N/C pin.
|
|
* TRM say that it may cause unexcepted state and leakage current.
|
|
* and pull-none is only for output function.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
int pin = i + EXYNOS4X12_GPIO_M10;
|
|
|
|
sprintf(str, "model_rev%d", i);
|
|
gpio_request(pin, str);
|
|
gpio_cfg_pin(pin, S5P_GPIO_INPUT);
|
|
}
|
|
|
|
/* GPM1[5:2]: HW_REV[3:0] */
|
|
for (i = 0; i < 4; i++) {
|
|
int pin = i + EXYNOS4X12_GPIO_M12;
|
|
|
|
sprintf(str, "hw_rev%d", i);
|
|
gpio_request(pin, str);
|
|
gpio_cfg_pin(pin, S5P_GPIO_INPUT);
|
|
gpio_set_pull(pin, S5P_GPIO_PULL_NONE);
|
|
}
|
|
|
|
/* GPM1[1:0]: MODEL_REV[1:0] */
|
|
for (i = 0; i < 2; i++)
|
|
modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i);
|
|
|
|
/* board_rev[15:8] = model */
|
|
board_rev = modelrev << 8;
|
|
}
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
return board_rev;
|
|
}
|
|
|
|
static inline u32 get_model_rev(void)
|
|
{
|
|
return (board_rev >> 8) & 0xff;
|
|
}
|
|
|
|
static void board_external_gpio_init(void)
|
|
{
|
|
/*
|
|
* some pins which in alive block are connected with external pull-up
|
|
* but it's default setting is pull-down.
|
|
* if that pin set as input then that floated
|
|
*/
|
|
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE); /* PS_ALS_INT */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE); /* TSP_nINT */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE); /* AP_PMIC_IRQ*/
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE); /* IF_PMIC_IRQ*/
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE); /* VOL_UP */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE); /* VOL_DOWN */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE); /* FUEL_ALERT */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE); /* ADC_INT */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE); /* nPOWER */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE); /* WPC_INT */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE); /* OK_KEY */
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */
|
|
}
|
|
|
|
int exynos_early_init_f(void)
|
|
{
|
|
board_external_gpio_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int exynos_init(void)
|
|
{
|
|
struct exynos4_power *pwr =
|
|
(struct exynos4_power *)samsung_get_base_power();
|
|
|
|
check_hw_revision();
|
|
printf("HW Revision:\t0x%04x\n", board_rev);
|
|
|
|
/*
|
|
* First bootloader on the TRATS2 platform uses
|
|
* INFORM4 and INFORM5 registers for recovery
|
|
*
|
|
* To indicate correct boot chain - those two
|
|
* registers must be cleared out
|
|
*/
|
|
writel(0, &pwr->inform4);
|
|
writel(0, &pwr->inform5);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int exynos_power_init(void)
|
|
{
|
|
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
|
|
int chrg;
|
|
struct power_battery *pb;
|
|
struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
|
|
|
|
pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */
|
|
power_muic_init(I2C_10); /* I2C adapter 10 - bus name soft1 */
|
|
power_fg_init(I2C_9); /* I2C adapter 9 - bus name soft0 */
|
|
power_bat_init(0);
|
|
|
|
p_chrg = pmic_get("MAX77693_PMIC");
|
|
if (!p_chrg) {
|
|
puts("MAX77693_PMIC: Not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
p_muic = pmic_get("MAX77693_MUIC");
|
|
if (!p_muic) {
|
|
puts("MAX77693_MUIC: Not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
p_fg = pmic_get("MAX77693_FG");
|
|
if (!p_fg) {
|
|
puts("MAX17042_FG: Not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0)
|
|
puts("No battery detected\n");
|
|
|
|
p_bat = pmic_get("BAT_TRATS2");
|
|
if (!p_bat) {
|
|
puts("BAT_TRATS2: Not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
p_fg->parent = p_bat;
|
|
p_chrg->parent = p_bat;
|
|
p_muic->parent = p_bat;
|
|
|
|
p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
|
|
|
|
pb = p_bat->pbat;
|
|
chrg = p_muic->chrg->chrg_type(p_muic);
|
|
debug("CHARGER TYPE: %d\n", chrg);
|
|
|
|
if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
|
|
puts("No battery detected\n");
|
|
return 0;
|
|
}
|
|
|
|
p_fg->fg->fg_battery_check(p_fg, p_bat);
|
|
|
|
if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
|
|
puts("CHARGE Battery !\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_GADGET
|
|
static int s5pc210_phy_control(int on)
|
|
{
|
|
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
|
|
int ret = 0;
|
|
unsigned int val;
|
|
struct pmic *p, *p_pmic, *p_muic;
|
|
|
|
p_pmic = pmic_get("MAX77686_PMIC");
|
|
if (!p_pmic)
|
|
return -ENODEV;
|
|
|
|
if (pmic_probe(p_pmic))
|
|
return -1;
|
|
|
|
p_muic = pmic_get("MAX77693_MUIC");
|
|
if (!p_muic)
|
|
return -ENODEV;
|
|
|
|
if (pmic_probe(p_muic))
|
|
return -1;
|
|
|
|
if (on) {
|
|
ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
|
|
if (ret)
|
|
return -1;
|
|
|
|
p = pmic_get("MAX77693_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
if (pmic_probe(p))
|
|
return -1;
|
|
|
|
/* SAFEOUT */
|
|
ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
|
|
if (ret)
|
|
return -1;
|
|
|
|
val |= MAX77693_ENSAFEOUT1;
|
|
ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
|
|
if (ret)
|
|
return -1;
|
|
|
|
/* PATH: USB */
|
|
ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
|
|
MAX77693_MUIC_CTRL1_DN1DP2);
|
|
|
|
} else {
|
|
ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
|
|
if (ret)
|
|
return -1;
|
|
|
|
/* PATH: UART */
|
|
ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
|
|
MAX77693_MUIC_CTRL1_UT1UR2);
|
|
}
|
|
|
|
if (ret)
|
|
return -1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
struct dwc2_plat_otg_data s5pc210_otg_data = {
|
|
.phy_control = s5pc210_phy_control,
|
|
.regs_phy = EXYNOS4X12_USBPHY_BASE,
|
|
.regs_otg = EXYNOS4X12_USBOTG_BASE,
|
|
.usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
|
|
.usb_flags = PHY0_SLEEP,
|
|
};
|
|
|
|
int board_usb_init(int index, enum usb_init_type init)
|
|
{
|
|
debug("USB_udc_probe\n");
|
|
return dwc2_udc_probe(&s5pc210_otg_data);
|
|
}
|
|
|
|
int g_dnl_board_usb_cable_connected(void)
|
|
{
|
|
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
|
|
struct pmic *muic = pmic_get("MAX77693_MUIC");
|
|
if (!muic)
|
|
return 0;
|
|
|
|
return !!muic->chrg->chrg_type(muic);
|
|
#else
|
|
return false;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* LCD
|
|
*/
|
|
|
|
#ifdef CONFIG_LCD
|
|
int mipi_power(void)
|
|
{
|
|
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
|
|
struct pmic *p = pmic_get("MAX77686_PMIC");
|
|
|
|
/* LDO8 VMIPI_1.0V_AP */
|
|
max77686_set_ldo_mode(p, 8, OPMODE_ON);
|
|
/* LDO10 VMIPI_1.8V_AP */
|
|
max77686_set_ldo_mode(p, 10, OPMODE_ON);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void exynos_lcd_power_on(void)
|
|
{
|
|
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
|
|
struct pmic *p = pmic_get("MAX77686_PMIC");
|
|
|
|
/* LCD_2.2V_EN: GPC0[1] */
|
|
gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en");
|
|
gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_C01, 1);
|
|
|
|
/* LDO25 VCC_3.1V_LCD */
|
|
pmic_probe(p);
|
|
max77686_set_ldo_voltage(p, 25, 3100000);
|
|
max77686_set_ldo_mode(p, 25, OPMODE_LPM);
|
|
#endif
|
|
}
|
|
|
|
void exynos_reset_lcd(void)
|
|
{
|
|
/* reset lcd */
|
|
gpio_request(EXYNOS4X12_GPIO_F21, "lcd_reset");
|
|
gpio_direction_output(EXYNOS4X12_GPIO_F21, 0);
|
|
udelay(10);
|
|
gpio_set_value(EXYNOS4X12_GPIO_F21, 1);
|
|
}
|
|
|
|
void exynos_lcd_misc_init(vidinfo_t *vid)
|
|
{
|
|
#ifdef CONFIG_TIZEN
|
|
get_tizen_logo_info(vid);
|
|
#endif
|
|
#ifdef CONFIG_S6E8AX0
|
|
s6e8ax0_init();
|
|
#endif
|
|
}
|
|
#endif /* LCD */
|