mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
837 lines
22 KiB
C
837 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Freescale i.MX6 PCI Express Root-Complex driver
|
|
*
|
|
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
|
|
*
|
|
* Based on upstream Linux kernel driver:
|
|
* pci-imx6.c: Sean Cross <xobs@kosagi.com>
|
|
* pcie-designware.c: Jingoo Han <jg1.han@samsung.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <pci.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sizes.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
#ifdef CONFIG_MX6SX
|
|
#define MX6_DBI_ADDR 0x08ffc000
|
|
#define MX6_IO_ADDR 0x08000000
|
|
#define MX6_MEM_ADDR 0x08100000
|
|
#define MX6_ROOT_ADDR 0x08f00000
|
|
#else
|
|
#define MX6_DBI_ADDR 0x01ffc000
|
|
#define MX6_IO_ADDR 0x01000000
|
|
#define MX6_MEM_ADDR 0x01100000
|
|
#define MX6_ROOT_ADDR 0x01f00000
|
|
#endif
|
|
#define MX6_DBI_SIZE 0x4000
|
|
#define MX6_IO_SIZE 0x100000
|
|
#define MX6_MEM_SIZE 0xe00000
|
|
#define MX6_ROOT_SIZE 0xfc000
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
|
|
#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
|
|
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
|
|
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
#define PCIE_PHY_DEBUG_R1_LINK_UP (1 << 4)
|
|
#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (1 << 29)
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA_LOC 0
|
|
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
|
|
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
|
|
#define PCIE_PHY_CTRL_WR_LOC 18
|
|
#define PCIE_PHY_CTRL_RD_LOC 19
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_DATA_LOC 0
|
|
#define PCIE_PHY_STAT_ACK_LOC 16
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
|
|
|
|
#define PCIE_PHY_PUP_REQ (1 << 7)
|
|
|
|
/* iATU registers */
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
struct imx_pcie_priv {
|
|
void __iomem *dbi_base;
|
|
void __iomem *cfg_base;
|
|
};
|
|
|
|
/*
|
|
* PHY access functions
|
|
*/
|
|
static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
|
|
{
|
|
u32 val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
|
|
{
|
|
u32 val, phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
|
|
writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
*data = val & 0xffff;
|
|
|
|
/* deassert Read signal */
|
|
writel(0x00, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
|
|
{
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* capture data */
|
|
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(0x0, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_link_up(struct imx_pcie_priv *priv)
|
|
{
|
|
u32 rc, ltssm;
|
|
int rx_valid, temp;
|
|
|
|
/* link is debug bit 36, debug register 1 starts at bit 32 */
|
|
rc = readl(priv->dbi_base + PCIE_PHY_DEBUG_R1);
|
|
if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) &&
|
|
!(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))
|
|
return -EAGAIN;
|
|
|
|
/*
|
|
* From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
|
|
* Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
|
|
* If (MAC/LTSSM.state == Recovery.RcvrLock)
|
|
* && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
|
|
* to gen2 is stuck
|
|
*/
|
|
pcie_phy_read(priv->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
|
|
ltssm = readl(priv->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
|
|
|
|
if (rx_valid & 0x01)
|
|
return 0;
|
|
|
|
if (ltssm != 0x0d)
|
|
return 0;
|
|
|
|
printf("transition to gen2 is stuck, reset PHY!\n");
|
|
|
|
pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
|
|
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
udelay(3000);
|
|
|
|
pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
|
|
temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* iATU region setup
|
|
*/
|
|
static int imx_pcie_regions_setup(struct imx_pcie_priv *priv)
|
|
{
|
|
/*
|
|
* i.MX6 defines 16MB in the AXI address map for PCIe.
|
|
*
|
|
* That address space excepted the pcie registers is
|
|
* split and defined into different regions by iATU,
|
|
* with sizes and offsets as follows:
|
|
*
|
|
* 0x0100_0000 --- 0x010F_FFFF 1MB IORESOURCE_IO
|
|
* 0x0110_0000 --- 0x01EF_FFFF 14MB IORESOURCE_MEM
|
|
* 0x01F0_0000 --- 0x01FF_FFFF 1MB Cfg + Registers
|
|
*/
|
|
|
|
/* CMD reg:I/O space, MEM space, and Bus Master Enable */
|
|
setbits_le32(priv->dbi_base + PCI_COMMAND,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
|
|
/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
|
|
setbits_le32(priv->dbi_base + PCI_CLASS_REVISION,
|
|
PCI_CLASS_BRIDGE_PCI << 16);
|
|
|
|
/* Region #0 is used for Outbound CFG space access. */
|
|
writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT);
|
|
|
|
writel(lower_32_bits((uintptr_t)priv->cfg_base),
|
|
priv->dbi_base + PCIE_ATU_LOWER_BASE);
|
|
writel(upper_32_bits((uintptr_t)priv->cfg_base),
|
|
priv->dbi_base + PCIE_ATU_UPPER_BASE);
|
|
writel(lower_32_bits((uintptr_t)priv->cfg_base + MX6_ROOT_SIZE),
|
|
priv->dbi_base + PCIE_ATU_LIMIT);
|
|
|
|
writel(0, priv->dbi_base + PCIE_ATU_LOWER_TARGET);
|
|
writel(0, priv->dbi_base + PCIE_ATU_UPPER_TARGET);
|
|
writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1);
|
|
writel(PCIE_ATU_ENABLE, priv->dbi_base + PCIE_ATU_CR2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PCI Express accessors
|
|
*/
|
|
static void __iomem *get_bus_address(struct imx_pcie_priv *priv,
|
|
pci_dev_t d, int where)
|
|
{
|
|
void __iomem *va_address;
|
|
|
|
/* Reconfigure Region #0 */
|
|
writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT);
|
|
|
|
if (PCI_BUS(d) < 2)
|
|
writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1);
|
|
else
|
|
writel(PCIE_ATU_TYPE_CFG1, priv->dbi_base + PCIE_ATU_CR1);
|
|
|
|
if (PCI_BUS(d) == 0) {
|
|
va_address = priv->dbi_base;
|
|
} else {
|
|
writel(d << 8, priv->dbi_base + PCIE_ATU_LOWER_TARGET);
|
|
va_address = priv->cfg_base;
|
|
}
|
|
|
|
va_address += (where & ~0x3);
|
|
|
|
return va_address;
|
|
}
|
|
|
|
static int imx_pcie_addr_valid(pci_dev_t d)
|
|
{
|
|
if ((PCI_BUS(d) == 0) && (PCI_DEV(d) > 1))
|
|
return -EINVAL;
|
|
if ((PCI_BUS(d) == 1) && (PCI_DEV(d) > 0))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Replace the original ARM DABT handler with a simple jump-back one.
|
|
*
|
|
* The problem here is that if we have a PCIe bridge attached to this PCIe
|
|
* controller, but no PCIe device is connected to the bridges' downstream
|
|
* port, the attempt to read/write from/to the config space will produce
|
|
* a DABT. This is a behavior of the controller and can not be disabled
|
|
* unfortuatelly.
|
|
*
|
|
* To work around the problem, we backup the current DABT handler address
|
|
* and replace it with our own DABT handler, which only bounces right back
|
|
* into the code.
|
|
*/
|
|
static void imx_pcie_fix_dabt_handler(bool set)
|
|
{
|
|
extern uint32_t *_data_abort;
|
|
uint32_t *data_abort_addr = (uint32_t *)&_data_abort;
|
|
|
|
static const uint32_t data_abort_bounce_handler = 0xe25ef004;
|
|
uint32_t data_abort_bounce_addr = (uint32_t)&data_abort_bounce_handler;
|
|
|
|
static uint32_t data_abort_backup;
|
|
|
|
if (set) {
|
|
data_abort_backup = *data_abort_addr;
|
|
*data_abort_addr = data_abort_bounce_addr;
|
|
} else {
|
|
*data_abort_addr = data_abort_backup;
|
|
}
|
|
}
|
|
|
|
static int imx_pcie_read_cfg(struct imx_pcie_priv *priv, pci_dev_t d,
|
|
int where, u32 *val)
|
|
{
|
|
void __iomem *va_address;
|
|
int ret;
|
|
|
|
ret = imx_pcie_addr_valid(d);
|
|
if (ret) {
|
|
*val = 0xffffffff;
|
|
return 0;
|
|
}
|
|
|
|
va_address = get_bus_address(priv, d, where);
|
|
|
|
/*
|
|
* Read the PCIe config space. We must replace the DABT handler
|
|
* here in case we got data abort from the PCIe controller, see
|
|
* imx_pcie_fix_dabt_handler() description. Note that writing the
|
|
* "val" with valid value is also imperative here as in case we
|
|
* did got DABT, the val would contain random value.
|
|
*/
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(0xffffffff, val);
|
|
*val = readl(va_address);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_write_cfg(struct imx_pcie_priv *priv, pci_dev_t d,
|
|
int where, u32 val)
|
|
{
|
|
void __iomem *va_address = NULL;
|
|
int ret;
|
|
|
|
ret = imx_pcie_addr_valid(d);
|
|
if (ret)
|
|
return ret;
|
|
|
|
va_address = get_bus_address(priv, d, where);
|
|
|
|
/*
|
|
* Write the PCIe config space. We must replace the DABT handler
|
|
* here in case we got data abort from the PCIe controller, see
|
|
* imx_pcie_fix_dabt_handler() description.
|
|
*/
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(val, va_address);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initial bus setup
|
|
*/
|
|
static int imx6_pcie_assert_core_reset(struct imx_pcie_priv *priv,
|
|
bool prepare_for_boot)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
if (is_mx6dqp())
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
|
|
|
|
#if defined(CONFIG_MX6SX)
|
|
struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;
|
|
|
|
/* SSP_EN is not used on MX6SX anymore */
|
|
setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
|
|
/* Force PCIe PHY reset */
|
|
setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
|
|
/* Power up PCIe PHY */
|
|
setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ);
|
|
#else
|
|
/*
|
|
* If the bootloader already enabled the link we need some special
|
|
* handling to get the core back into a state where it is safe to
|
|
* touch it for configuration. As there is no dedicated reset signal
|
|
* wired up for MX6QDL, we need to manually force LTSSM into "detect"
|
|
* state before completely disabling LTSSM, which is a prerequisite
|
|
* for core configuration.
|
|
*
|
|
* If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
|
|
* indication that the bootloader activated the link.
|
|
*/
|
|
if (is_mx6dq() && prepare_for_boot) {
|
|
u32 val, gpr1, gpr12;
|
|
|
|
gpr1 = readl(&iomuxc_regs->gpr[1]);
|
|
gpr12 = readl(&iomuxc_regs->gpr[12]);
|
|
if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) &&
|
|
(gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) {
|
|
val = readl(priv->dbi_base + PCIE_PL_PFLR);
|
|
val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
|
|
val |= PCIE_PL_PFLR_FORCE_LINK;
|
|
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(val, priv->dbi_base + PCIE_PL_PFLR);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2;
|
|
writel(val, &iomuxc_regs->gpr[12]);
|
|
}
|
|
}
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_init_phy(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
|
|
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_DEVICE_TYPE_MASK,
|
|
IOMUXC_GPR12_DEVICE_TYPE_RC);
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_LOS_LEVEL_MASK,
|
|
IOMUXC_GPR12_LOS_LEVEL_9);
|
|
|
|
#ifdef CONFIG_MX6SX
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_RX_EQ_MASK,
|
|
IOMUXC_GPR12_RX_EQ_2);
|
|
#endif
|
|
|
|
writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) |
|
|
(0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) |
|
|
(20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) |
|
|
(127 << IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET) |
|
|
(127 << IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET),
|
|
&iomuxc_regs->gpr[8]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
__weak int imx6_pcie_toggle_power(void)
|
|
{
|
|
#ifdef CONFIG_PCIE_IMX_POWER_GPIO
|
|
gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
|
|
gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0);
|
|
mdelay(20);
|
|
gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1);
|
|
mdelay(20);
|
|
gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
__weak int imx6_pcie_toggle_reset(void)
|
|
{
|
|
/*
|
|
* See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1'
|
|
* for detailed understanding of the PCIe CR reset logic.
|
|
*
|
|
* The PCIe #PERST reset line _MUST_ be connected, otherwise your
|
|
* design does not conform to the specification. You must wait at
|
|
* least 20 ms after de-asserting the #PERST so the EP device can
|
|
* do self-initialisation.
|
|
*
|
|
* In case your #PERST pin is connected to a plain GPIO pin of the
|
|
* CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's
|
|
* configuration file and the condition below will handle the rest
|
|
* of the reset toggling.
|
|
*
|
|
* In case your #PERST toggling logic is more complex, for example
|
|
* connected via CPLD or somesuch, you can override this function
|
|
* in your board file and implement reset logic as needed. You must
|
|
* not forget to wait at least 20 ms after de-asserting #PERST in
|
|
* this case either though.
|
|
*
|
|
* In case your #PERST line of the PCIe EP device is not connected
|
|
* at all, your design is broken and you should fix your design,
|
|
* otherwise you will observe problems like for example the link
|
|
* not coming up after rebooting the system back from running Linux
|
|
* that uses the PCIe as well OR the PCIe link might not come up in
|
|
* Linux at all in the first place since it's in some non-reset
|
|
* state due to being previously used in U-Boot.
|
|
*/
|
|
#ifdef CONFIG_PCIE_IMX_PERST_GPIO
|
|
gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset");
|
|
gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0);
|
|
mdelay(20);
|
|
gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1);
|
|
mdelay(20);
|
|
gpio_free(CONFIG_PCIE_IMX_PERST_GPIO);
|
|
#else
|
|
puts("WARNING: Make sure the PCIe #PERST line is connected!\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_deassert_core_reset(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
imx6_pcie_toggle_power();
|
|
|
|
enable_pcie_clock();
|
|
|
|
if (is_mx6dqp())
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
|
|
|
|
/*
|
|
* Wait for the clock to settle a bit, when the clock are sourced
|
|
* from the CPU, we need about 30 ms to settle.
|
|
*/
|
|
mdelay(50);
|
|
|
|
#if defined(CONFIG_MX6SX)
|
|
/* SSP_EN is not used on MX6SX anymore */
|
|
clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
|
|
/* Clear PCIe PHY reset bit */
|
|
clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
|
|
#else
|
|
/* Enable PCIe */
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
|
|
#endif
|
|
|
|
imx6_pcie_toggle_reset();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_link_up(struct imx_pcie_priv *priv)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
uint32_t tmp;
|
|
int count = 0;
|
|
|
|
imx6_pcie_assert_core_reset(priv, false);
|
|
imx6_pcie_init_phy();
|
|
imx6_pcie_deassert_core_reset();
|
|
|
|
imx_pcie_regions_setup(priv);
|
|
|
|
/*
|
|
* By default, the subordinate is set equally to the secondary
|
|
* bus (0x01) when the RC boots.
|
|
* This means that theoretically, only bus 1 is reachable from the RC.
|
|
* Force the PCIe RC subordinate to 0xff, otherwise no downstream
|
|
* devices will be detected if the enumeration is applied strictly.
|
|
*/
|
|
tmp = readl(priv->dbi_base + 0x18);
|
|
tmp |= (0xff << 16);
|
|
writel(tmp, priv->dbi_base + 0x18);
|
|
|
|
/*
|
|
* FIXME: Force the PCIe RC to Gen1 operation
|
|
* The RC must be forced into Gen1 mode before bringing the link
|
|
* up, otherwise no downstream devices are detected. After the
|
|
* link is up, a managed Gen1->Gen2 transition can be initiated.
|
|
*/
|
|
tmp = readl(priv->dbi_base + 0x7c);
|
|
tmp &= ~0xf;
|
|
tmp |= 0x1;
|
|
writel(tmp, priv->dbi_base + 0x7c);
|
|
|
|
/* LTSSM enable, starting link. */
|
|
setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
|
|
|
|
while (!imx6_pcie_link_up(priv)) {
|
|
udelay(10);
|
|
count++;
|
|
if (count >= 4000) {
|
|
#ifdef CONFIG_PCI_SCAN_SHOW
|
|
puts("PCI: pcie phy link never came up\n");
|
|
#endif
|
|
debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
readl(priv->dbi_base + PCIE_PHY_DEBUG_R0),
|
|
readl(priv->dbi_base + PCIE_PHY_DEBUG_R1));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_PCI)
|
|
static struct imx_pcie_priv imx_pcie_priv = {
|
|
.dbi_base = (void __iomem *)MX6_DBI_ADDR,
|
|
.cfg_base = (void __iomem *)MX6_ROOT_ADDR,
|
|
};
|
|
|
|
static struct imx_pcie_priv *priv = &imx_pcie_priv;
|
|
|
|
static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 *val)
|
|
{
|
|
struct imx_pcie_priv *priv = hose->priv_data;
|
|
|
|
return imx_pcie_read_cfg(priv, d, where, val);
|
|
}
|
|
|
|
static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 val)
|
|
{
|
|
struct imx_pcie_priv *priv = hose->priv_data;
|
|
|
|
return imx_pcie_write_cfg(priv, d, where, val);
|
|
}
|
|
|
|
void imx_pcie_init(void)
|
|
{
|
|
/* Static instance of the controller. */
|
|
static struct pci_controller pcc;
|
|
struct pci_controller *hose = &pcc;
|
|
int ret;
|
|
|
|
memset(&pcc, 0, sizeof(pcc));
|
|
|
|
hose->priv_data = priv;
|
|
|
|
/* PCI I/O space */
|
|
pci_set_region(&hose->regions[0],
|
|
MX6_IO_ADDR, MX6_IO_ADDR,
|
|
MX6_IO_SIZE, PCI_REGION_IO);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(&hose->regions[1],
|
|
MX6_MEM_ADDR, MX6_MEM_ADDR,
|
|
MX6_MEM_SIZE, PCI_REGION_MEM);
|
|
|
|
/* System memory space */
|
|
pci_set_region(&hose->regions[2],
|
|
MMDC0_ARB_BASE_ADDR, MMDC0_ARB_BASE_ADDR,
|
|
0xefffffff, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
|
|
|
|
hose->region_count = 3;
|
|
|
|
pci_set_ops(hose,
|
|
pci_hose_read_config_byte_via_dword,
|
|
pci_hose_read_config_word_via_dword,
|
|
imx_pcie_read_config,
|
|
pci_hose_write_config_byte_via_dword,
|
|
pci_hose_write_config_word_via_dword,
|
|
imx_pcie_write_config);
|
|
|
|
/* Start the controller. */
|
|
ret = imx_pcie_link_up(priv);
|
|
|
|
if (!ret) {
|
|
pci_register_hose(hose);
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
}
|
|
|
|
void imx_pcie_remove(void)
|
|
{
|
|
imx6_pcie_assert_core_reset(priv, true);
|
|
}
|
|
|
|
/* Probe function. */
|
|
void pci_init_board(void)
|
|
{
|
|
imx_pcie_init();
|
|
}
|
|
#else
|
|
static int imx_pcie_dm_read_config(const struct udevice *dev, pci_dev_t bdf,
|
|
uint offset, ulong *value,
|
|
enum pci_size_t size)
|
|
{
|
|
struct imx_pcie_priv *priv = dev_get_priv(dev);
|
|
u32 tmpval;
|
|
int ret;
|
|
|
|
ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*value = pci_conv_32_to_size(tmpval, offset, size);
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_dm_write_config(struct udevice *dev, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
struct imx_pcie_priv *priv = dev_get_priv(dev);
|
|
u32 tmpval, newval;
|
|
int ret;
|
|
|
|
ret = imx_pcie_read_cfg(priv, bdf, offset, &tmpval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
newval = pci_conv_size_to_32(tmpval, value, offset, size);
|
|
return imx_pcie_write_cfg(priv, bdf, offset, newval);
|
|
}
|
|
|
|
static int imx_pcie_dm_probe(struct udevice *dev)
|
|
{
|
|
struct imx_pcie_priv *priv = dev_get_priv(dev);
|
|
|
|
return imx_pcie_link_up(priv);
|
|
}
|
|
|
|
static int imx_pcie_dm_remove(struct udevice *dev)
|
|
{
|
|
struct imx_pcie_priv *priv = dev_get_priv(dev);
|
|
|
|
imx6_pcie_assert_core_reset(priv, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct imx_pcie_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->dbi_base = (void __iomem *)devfdt_get_addr_index(dev, 0);
|
|
priv->cfg_base = (void __iomem *)devfdt_get_addr_index(dev, 1);
|
|
if (!priv->dbi_base || !priv->cfg_base)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_pci_ops imx_pcie_ops = {
|
|
.read_config = imx_pcie_dm_read_config,
|
|
.write_config = imx_pcie_dm_write_config,
|
|
};
|
|
|
|
static const struct udevice_id imx_pcie_ids[] = {
|
|
{ .compatible = "fsl,imx6q-pcie" },
|
|
{ .compatible = "fsl,imx6sx-pcie" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(imx_pcie) = {
|
|
.name = "imx_pcie",
|
|
.id = UCLASS_PCI,
|
|
.of_match = imx_pcie_ids,
|
|
.ops = &imx_pcie_ops,
|
|
.probe = imx_pcie_dm_probe,
|
|
.remove = imx_pcie_dm_remove,
|
|
.of_to_plat = imx_pcie_of_to_plat,
|
|
.priv_auto = sizeof(struct imx_pcie_priv),
|
|
.flags = DM_FLAG_OS_PREPARE,
|
|
};
|
|
#endif
|