mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 07:58:52 +09:00
![Sean Anderson](/assets/img/avatar_default.png)
This logs with the device from struct dwc3. Some files also need to include dm.h so fields in udevice can be accessed. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2685 lines
64 KiB
C
2685 lines
64 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
|
|
*
|
|
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Authors: Felipe Balbi <balbi@ti.com>,
|
|
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
*
|
|
* Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/gadget.c) and ported
|
|
* to uboot.
|
|
*
|
|
* commit 8e74475b0e : usb: dwc3: gadget: use udc-core's reset notifier
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include "core.h"
|
|
#include "gadget.h"
|
|
#include "io.h"
|
|
|
|
#include "linux-compat.h"
|
|
|
|
/**
|
|
* dwc3_gadget_set_test_mode - Enables USB2 Test Modes
|
|
* @dwc: pointer to our context structure
|
|
* @mode: the mode to set (J, K SE0 NAK, Force Enable)
|
|
*
|
|
* Caller should take care of locking. This function will
|
|
* return 0 on success or -EINVAL if wrong Test Selector
|
|
* is passed
|
|
*/
|
|
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
|
|
|
|
switch (mode) {
|
|
case TEST_J:
|
|
case TEST_K:
|
|
case TEST_SE0_NAK:
|
|
case TEST_PACKET:
|
|
case TEST_FORCE_EN:
|
|
reg |= mode << 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* dwc3_gadget_get_link_state - Gets current state of USB Link
|
|
* @dwc: pointer to our context structure
|
|
*
|
|
* Caller should take care of locking. This function will
|
|
* return the link state on success (>= 0) or -ETIMEDOUT.
|
|
*/
|
|
int dwc3_gadget_get_link_state(struct dwc3 *dwc)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
|
|
return DWC3_DSTS_USBLNKST(reg);
|
|
}
|
|
|
|
/**
|
|
* dwc3_gadget_set_link_state - Sets USB Link to a particular State
|
|
* @dwc: pointer to our context structure
|
|
* @state: the state to put link into
|
|
*
|
|
* Caller should take care of locking. This function will
|
|
* return 0 on success or -ETIMEDOUT.
|
|
*/
|
|
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
|
|
{
|
|
int retries = 10000;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Wait until device controller is ready. Only applies to 1.94a and
|
|
* later RTL.
|
|
*/
|
|
if (dwc->revision >= DWC3_REVISION_194A) {
|
|
while (--retries) {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
if (reg & DWC3_DSTS_DCNRD)
|
|
udelay(5);
|
|
else
|
|
break;
|
|
}
|
|
|
|
if (retries <= 0)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
|
|
|
|
/* set requested state */
|
|
reg |= DWC3_DCTL_ULSTCHNGREQ(state);
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
/*
|
|
* The following code is racy when called from dwc3_gadget_wakeup,
|
|
* and is not needed, at least on newer versions
|
|
*/
|
|
if (dwc->revision >= DWC3_REVISION_194A)
|
|
return 0;
|
|
|
|
/* wait for a change in DSTS */
|
|
retries = 10000;
|
|
while (--retries) {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
|
|
if (DWC3_DSTS_USBLNKST(reg) == state)
|
|
return 0;
|
|
|
|
udelay(5);
|
|
}
|
|
|
|
dev_vdbg(dwc->dev, "link state change request timed out\n");
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/**
|
|
* dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
|
|
* @dwc: pointer to our context structure
|
|
*
|
|
* This function will a best effort FIFO allocation in order
|
|
* to improve FIFO usage and throughput, while still allowing
|
|
* us to enable as many endpoints as possible.
|
|
*
|
|
* Keep in mind that this operation will be highly dependent
|
|
* on the configured size for RAM1 - which contains TxFifo -,
|
|
* the amount of endpoints enabled on coreConsultant tool, and
|
|
* the width of the Master Bus.
|
|
*
|
|
* In the ideal world, we would always be able to satisfy the
|
|
* following equation:
|
|
*
|
|
* ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
|
|
* (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
|
|
*
|
|
* Unfortunately, due to many variables that's not always the case.
|
|
*/
|
|
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
|
|
{
|
|
int last_fifo_depth = 0;
|
|
int fifo_size;
|
|
int mdwidth;
|
|
int num;
|
|
|
|
if (!dwc->needs_fifo_resize)
|
|
return 0;
|
|
|
|
mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
|
|
|
|
/* MDWIDTH is represented in bits, we need it in bytes */
|
|
mdwidth >>= 3;
|
|
|
|
/*
|
|
* FIXME For now we will only allocate 1 wMaxPacketSize space
|
|
* for each enabled endpoint, later patches will come to
|
|
* improve this algorithm so that we better use the internal
|
|
* FIFO space
|
|
*/
|
|
for (num = 0; num < dwc->num_in_eps; num++) {
|
|
/* bit0 indicates direction; 1 means IN ep */
|
|
struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
|
|
int mult = 1;
|
|
int tmp;
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED))
|
|
continue;
|
|
|
|
if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
|
|
|| usb_endpoint_xfer_isoc(dep->endpoint.desc))
|
|
mult = 3;
|
|
|
|
/*
|
|
* REVISIT: the following assumes we will always have enough
|
|
* space available on the FIFO RAM for all possible use cases.
|
|
* Make sure that's true somehow and change FIFO allocation
|
|
* accordingly.
|
|
*
|
|
* If we have Bulk or Isochronous endpoints, we want
|
|
* them to be able to be very, very fast. So we're giving
|
|
* those endpoints a fifo_size which is enough for 3 full
|
|
* packets
|
|
*/
|
|
tmp = mult * (dep->endpoint.maxpacket + mdwidth);
|
|
tmp += mdwidth;
|
|
|
|
fifo_size = DIV_ROUND_UP(tmp, mdwidth);
|
|
|
|
fifo_size |= (last_fifo_depth << 16);
|
|
|
|
dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
|
|
dep->name, last_fifo_depth, fifo_size & 0xffff);
|
|
|
|
dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
|
|
|
|
last_fifo_depth += (fifo_size & 0xffff);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
|
|
int status)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
if (req->queued) {
|
|
dep->busy_slot++;
|
|
/*
|
|
* Skip LINK TRB. We can't use req->trb and check for
|
|
* DWC3_TRBCTL_LINK_TRB because it points the TRB we
|
|
* just completed (not the LINK TRB).
|
|
*/
|
|
if (((dep->busy_slot & DWC3_TRB_MASK) ==
|
|
DWC3_TRB_NUM- 1) &&
|
|
usb_endpoint_xfer_isoc(dep->endpoint.desc))
|
|
dep->busy_slot++;
|
|
req->queued = false;
|
|
}
|
|
|
|
list_del(&req->list);
|
|
req->trb = NULL;
|
|
if (req->request.length)
|
|
dwc3_flush_cache((uintptr_t)req->request.dma, req->request.length);
|
|
|
|
if (req->request.status == -EINPROGRESS)
|
|
req->request.status = status;
|
|
|
|
if (dwc->ep0_bounced && dep->number == 0)
|
|
dwc->ep0_bounced = false;
|
|
else
|
|
usb_gadget_unmap_request(&dwc->gadget, &req->request,
|
|
req->direction);
|
|
|
|
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
|
|
req, dep->name, req->request.actual,
|
|
req->request.length, status);
|
|
|
|
spin_unlock(&dwc->lock);
|
|
usb_gadget_giveback_request(&dep->endpoint, &req->request);
|
|
spin_lock(&dwc->lock);
|
|
}
|
|
|
|
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
|
|
{
|
|
u32 timeout = 500;
|
|
u32 reg;
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
|
|
dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
|
|
|
|
do {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
|
|
if (!(reg & DWC3_DGCMD_CMDACT)) {
|
|
dev_vdbg(dwc->dev, "Command Complete --> %d\n",
|
|
DWC3_DGCMD_STATUS(reg));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We can't sleep here, because it's also called from
|
|
* interrupt context.
|
|
*/
|
|
timeout--;
|
|
if (!timeout)
|
|
return -ETIMEDOUT;
|
|
udelay(1);
|
|
} while (1);
|
|
}
|
|
|
|
int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
|
|
unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
|
|
{
|
|
u32 timeout = 500;
|
|
u32 reg;
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
|
|
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
|
|
dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
|
|
do {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
|
|
if (!(reg & DWC3_DEPCMD_CMDACT)) {
|
|
dev_vdbg(dwc->dev, "Command Complete --> %d\n",
|
|
DWC3_DEPCMD_STATUS(reg));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We can't sleep here, because it is also called from
|
|
* interrupt context.
|
|
*/
|
|
timeout--;
|
|
if (!timeout)
|
|
return -ETIMEDOUT;
|
|
|
|
udelay(1);
|
|
} while (1);
|
|
}
|
|
|
|
static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
|
|
struct dwc3_trb *trb)
|
|
{
|
|
u32 offset = (char *) trb - (char *) dep->trb_pool;
|
|
|
|
return dep->trb_pool_dma + offset;
|
|
}
|
|
|
|
static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
|
|
{
|
|
if (dep->trb_pool)
|
|
return 0;
|
|
|
|
if (dep->number == 0 || dep->number == 1)
|
|
return 0;
|
|
|
|
dep->trb_pool = dma_alloc_coherent(sizeof(struct dwc3_trb) *
|
|
DWC3_TRB_NUM,
|
|
(unsigned long *)&dep->trb_pool_dma);
|
|
if (!dep->trb_pool) {
|
|
dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
|
|
dep->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwc3_free_trb_pool(struct dwc3_ep *dep)
|
|
{
|
|
dma_free_coherent(dep->trb_pool);
|
|
|
|
dep->trb_pool = NULL;
|
|
dep->trb_pool_dma = 0;
|
|
}
|
|
|
|
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
u32 cmd;
|
|
|
|
memset(¶ms, 0x00, sizeof(params));
|
|
|
|
if (dep->number != 1) {
|
|
cmd = DWC3_DEPCMD_DEPSTARTCFG;
|
|
/* XferRscIdx == 0 for ep0 and 2 for the remaining */
|
|
if (dep->number > 1) {
|
|
if (dwc->start_config_issued)
|
|
return 0;
|
|
dwc->start_config_issued = true;
|
|
cmd |= DWC3_DEPCMD_PARAM(2);
|
|
}
|
|
|
|
return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
|
|
const struct usb_endpoint_descriptor *desc,
|
|
const struct usb_ss_ep_comp_descriptor *comp_desc,
|
|
bool ignore, bool restore)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
|
|
memset(¶ms, 0x00, sizeof(params));
|
|
|
|
params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
|
|
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
|
|
|
|
/* Burst size is only needed in SuperSpeed mode */
|
|
if (dwc->gadget.speed == USB_SPEED_SUPER) {
|
|
u32 burst = dep->endpoint.maxburst - 1;
|
|
|
|
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
|
|
}
|
|
|
|
if (ignore)
|
|
params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
|
|
|
|
if (restore) {
|
|
params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
|
|
params.param2 |= dep->saved_state;
|
|
}
|
|
|
|
params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
|
|
| DWC3_DEPCFG_XFER_NOT_READY_EN;
|
|
|
|
if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
|
|
params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
|
|
| DWC3_DEPCFG_STREAM_EVENT_EN;
|
|
dep->stream_capable = true;
|
|
}
|
|
|
|
if (!usb_endpoint_xfer_control(desc))
|
|
params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
|
|
|
|
/*
|
|
* We are doing 1:1 mapping for endpoints, meaning
|
|
* Physical Endpoints 2 maps to Logical Endpoint 2 and
|
|
* so on. We consider the direction bit as part of the physical
|
|
* endpoint number. So USB endpoint 0x81 is 0x03.
|
|
*/
|
|
params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
|
|
|
|
/*
|
|
* We must use the lower 16 TX FIFOs even though
|
|
* HW might have more
|
|
*/
|
|
if (dep->direction)
|
|
params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
|
|
|
|
if (desc->bInterval) {
|
|
params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
|
|
dep->interval = 1 << (desc->bInterval - 1);
|
|
}
|
|
|
|
return dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_SETEPCONFIG, ¶ms);
|
|
}
|
|
|
|
static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
|
|
memset(¶ms, 0x00, sizeof(params));
|
|
|
|
params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
|
|
|
|
return dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms);
|
|
}
|
|
|
|
/**
|
|
* __dwc3_gadget_ep_enable - Initializes a HW endpoint
|
|
* @dep: endpoint to be initialized
|
|
* @desc: USB Endpoint Descriptor
|
|
*
|
|
* Caller should take care of locking
|
|
*/
|
|
static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
|
|
const struct usb_endpoint_descriptor *desc,
|
|
const struct usb_ss_ep_comp_descriptor *comp_desc,
|
|
bool ignore, bool restore)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED)) {
|
|
ret = dwc3_gadget_start_config(dwc, dep);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
|
|
restore);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED)) {
|
|
struct dwc3_trb *trb_st_hw;
|
|
struct dwc3_trb *trb_link;
|
|
|
|
ret = dwc3_gadget_set_xfer_resource(dwc, dep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dep->endpoint.desc = desc;
|
|
dep->comp_desc = comp_desc;
|
|
dep->type = usb_endpoint_type(desc);
|
|
dep->flags |= DWC3_EP_ENABLED;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
|
|
reg |= DWC3_DALEPENA_EP(dep->number);
|
|
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
|
|
|
|
if (!usb_endpoint_xfer_isoc(desc))
|
|
return 0;
|
|
|
|
/* Link TRB for ISOC. The HWO bit is never reset */
|
|
trb_st_hw = &dep->trb_pool[0];
|
|
|
|
trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
|
|
memset(trb_link, 0, sizeof(*trb_link));
|
|
|
|
trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
|
|
trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
|
|
trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
|
|
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force);
|
|
static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3_request *req;
|
|
|
|
if (!list_empty(&dep->req_queued)) {
|
|
dwc3_stop_active_transfer(dwc, dep->number, true);
|
|
|
|
/* - giveback all requests to gadget driver */
|
|
while (!list_empty(&dep->req_queued)) {
|
|
req = next_request(&dep->req_queued);
|
|
|
|
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
|
|
}
|
|
}
|
|
|
|
while (!list_empty(&dep->request_list)) {
|
|
req = next_request(&dep->request_list);
|
|
|
|
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* __dwc3_gadget_ep_disable - Disables a HW endpoint
|
|
* @dep: the endpoint to disable
|
|
*
|
|
* This function also removes requests which are currently processed ny the
|
|
* hardware and those which are not yet scheduled.
|
|
* Caller should take care of locking.
|
|
*/
|
|
static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
u32 reg;
|
|
|
|
dwc3_remove_requests(dwc, dep);
|
|
|
|
/* make sure HW endpoint isn't stalled */
|
|
if (dep->flags & DWC3_EP_STALL)
|
|
__dwc3_gadget_ep_set_halt(dep, 0, false);
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
|
|
reg &= ~DWC3_DALEPENA_EP(dep->number);
|
|
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
|
|
|
|
dep->stream_capable = false;
|
|
dep->endpoint.desc = NULL;
|
|
dep->comp_desc = NULL;
|
|
dep->type = 0;
|
|
dep->flags = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int dwc3_gadget_ep_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
|
|
pr_debug("dwc3: invalid parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!desc->wMaxPacketSize) {
|
|
pr_debug("dwc3: missing wMaxPacketSize\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dep = to_dwc3_ep(ep);
|
|
|
|
if (dep->flags & DWC3_EP_ENABLED) {
|
|
WARN(true, "%s is already enabled\n",
|
|
dep->name);
|
|
return 0;
|
|
}
|
|
|
|
switch (usb_endpoint_type(desc)) {
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
strlcat(dep->name, "-control", sizeof(dep->name));
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
strlcat(dep->name, "-isoc", sizeof(dep->name));
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
strlcat(dep->name, "-bulk", sizeof(dep->name));
|
|
break;
|
|
case USB_ENDPOINT_XFER_INT:
|
|
strlcat(dep->name, "-int", sizeof(dep->name));
|
|
break;
|
|
default:
|
|
dev_err(dep->dwc->dev, "invalid endpoint transfer type\n");
|
|
}
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_ep_disable(struct usb_ep *ep)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!ep) {
|
|
pr_debug("dwc3: invalid parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dep = to_dwc3_ep(ep);
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED)) {
|
|
WARN(true, "%s is already disabled\n",
|
|
dep->name);
|
|
return 0;
|
|
}
|
|
|
|
snprintf(dep->name, sizeof(dep->name), "ep%d%s",
|
|
dep->number >> 1,
|
|
(dep->number & 1) ? "in" : "out");
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
ret = __dwc3_gadget_ep_disable(dep);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct dwc3_request *req;
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
|
|
req = kzalloc(sizeof(*req), gfp_flags);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
req->epnum = dep->number;
|
|
req->dep = dep;
|
|
|
|
return &req->request;
|
|
}
|
|
|
|
static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct dwc3_request *req = to_dwc3_request(request);
|
|
|
|
kfree(req);
|
|
}
|
|
|
|
/**
|
|
* dwc3_prepare_one_trb - setup one TRB from one request
|
|
* @dep: endpoint for which this request is prepared
|
|
* @req: dwc3_request pointer
|
|
*/
|
|
static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
|
|
struct dwc3_request *req, dma_addr_t dma,
|
|
unsigned length, unsigned last, unsigned chain, unsigned node)
|
|
{
|
|
struct dwc3_trb *trb;
|
|
|
|
dev_vdbg(dep->dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
|
|
dep->name, req, (unsigned long long)dma,
|
|
length, last ? " last" : "", chain ? " chain" : "");
|
|
|
|
|
|
trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
|
|
|
|
if (!req->trb) {
|
|
dwc3_gadget_move_request_queued(req);
|
|
req->trb = trb;
|
|
req->trb_dma = dwc3_trb_dma_offset(dep, trb);
|
|
req->start_slot = dep->free_slot & DWC3_TRB_MASK;
|
|
}
|
|
|
|
dep->free_slot++;
|
|
/* Skip the LINK-TRB on ISOC */
|
|
if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
|
|
usb_endpoint_xfer_isoc(dep->endpoint.desc))
|
|
dep->free_slot++;
|
|
|
|
trb->size = DWC3_TRB_SIZE_LENGTH(length);
|
|
trb->bpl = lower_32_bits(dma);
|
|
trb->bph = upper_32_bits(dma);
|
|
|
|
switch (usb_endpoint_type(dep->endpoint.desc)) {
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
if (!node)
|
|
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
|
|
else
|
|
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
case USB_ENDPOINT_XFER_INT:
|
|
trb->ctrl = DWC3_TRBCTL_NORMAL;
|
|
break;
|
|
default:
|
|
/*
|
|
* This is only possible with faulty memory because we
|
|
* checked it already :)
|
|
*/
|
|
BUG();
|
|
}
|
|
|
|
if (!req->request.no_interrupt && !chain)
|
|
trb->ctrl |= DWC3_TRB_CTRL_IOC;
|
|
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
|
|
trb->ctrl |= DWC3_TRB_CTRL_CSP;
|
|
} else if (last) {
|
|
trb->ctrl |= DWC3_TRB_CTRL_LST;
|
|
}
|
|
|
|
if (chain)
|
|
trb->ctrl |= DWC3_TRB_CTRL_CHN;
|
|
|
|
if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
|
|
trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
|
|
|
|
trb->ctrl |= DWC3_TRB_CTRL_HWO;
|
|
|
|
dwc3_flush_cache((uintptr_t)dma, length);
|
|
dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
|
|
}
|
|
|
|
/*
|
|
* dwc3_prepare_trbs - setup TRBs from requests
|
|
* @dep: endpoint for which requests are being prepared
|
|
* @starting: true if the endpoint is idle and no requests are queued.
|
|
*
|
|
* The function goes through the requests list and sets up TRBs for the
|
|
* transfers. The function returns once there are no more TRBs available or
|
|
* it runs out of requests.
|
|
*/
|
|
static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
|
|
{
|
|
struct dwc3_request *req, *n;
|
|
u32 trbs_left;
|
|
u32 max;
|
|
|
|
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
|
|
|
|
/* the first request must not be queued */
|
|
trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
|
|
|
|
/* Can't wrap around on a non-isoc EP since there's no link TRB */
|
|
if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
|
|
if (trbs_left > max)
|
|
trbs_left = max;
|
|
}
|
|
|
|
/*
|
|
* If busy & slot are equal than it is either full or empty. If we are
|
|
* starting to process requests then we are empty. Otherwise we are
|
|
* full and don't do anything
|
|
*/
|
|
if (!trbs_left) {
|
|
if (!starting)
|
|
return;
|
|
trbs_left = DWC3_TRB_NUM;
|
|
/*
|
|
* In case we start from scratch, we queue the ISOC requests
|
|
* starting from slot 1. This is done because we use ring
|
|
* buffer and have no LST bit to stop us. Instead, we place
|
|
* IOC bit every TRB_NUM/4. We try to avoid having an interrupt
|
|
* after the first request so we start at slot 1 and have
|
|
* 7 requests proceed before we hit the first IOC.
|
|
* Other transfer types don't use the ring buffer and are
|
|
* processed from the first TRB until the last one. Since we
|
|
* don't wrap around we have to start at the beginning.
|
|
*/
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
dep->busy_slot = 1;
|
|
dep->free_slot = 1;
|
|
} else {
|
|
dep->busy_slot = 0;
|
|
dep->free_slot = 0;
|
|
}
|
|
}
|
|
|
|
/* The last TRB is a link TRB, not used for xfer */
|
|
if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
|
|
return;
|
|
|
|
list_for_each_entry_safe(req, n, &dep->request_list, list) {
|
|
unsigned length;
|
|
dma_addr_t dma;
|
|
|
|
dma = req->request.dma;
|
|
length = req->request.length;
|
|
|
|
dwc3_prepare_one_trb(dep, req, dma, length,
|
|
true, false, 0);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
|
|
int start_new)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
struct dwc3_request *req;
|
|
struct dwc3 *dwc = dep->dwc;
|
|
int ret;
|
|
u32 cmd;
|
|
|
|
if (start_new && (dep->flags & DWC3_EP_BUSY)) {
|
|
dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
|
|
return -EBUSY;
|
|
}
|
|
dep->flags &= ~DWC3_EP_PENDING_REQUEST;
|
|
|
|
/*
|
|
* If we are getting here after a short-out-packet we don't enqueue any
|
|
* new requests as we try to set the IOC bit only on the last request.
|
|
*/
|
|
if (start_new) {
|
|
if (list_empty(&dep->req_queued))
|
|
dwc3_prepare_trbs(dep, start_new);
|
|
|
|
/* req points to the first request which will be sent */
|
|
req = next_request(&dep->req_queued);
|
|
} else {
|
|
dwc3_prepare_trbs(dep, start_new);
|
|
|
|
/*
|
|
* req points to the first request where HWO changed from 0 to 1
|
|
*/
|
|
req = next_request(&dep->req_queued);
|
|
}
|
|
if (!req) {
|
|
dep->flags |= DWC3_EP_PENDING_REQUEST;
|
|
return 0;
|
|
}
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
if (start_new) {
|
|
params.param0 = upper_32_bits(req->trb_dma);
|
|
params.param1 = lower_32_bits(req->trb_dma);
|
|
cmd = DWC3_DEPCMD_STARTTRANSFER;
|
|
} else {
|
|
cmd = DWC3_DEPCMD_UPDATETRANSFER;
|
|
}
|
|
|
|
cmd |= DWC3_DEPCMD_PARAM(cmd_param);
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
|
|
if (ret < 0) {
|
|
dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
|
|
|
|
/*
|
|
* FIXME we need to iterate over the list of requests
|
|
* here and stop, unmap, free and del each of the linked
|
|
* requests instead of what we do now.
|
|
*/
|
|
usb_gadget_unmap_request(&dwc->gadget, &req->request,
|
|
req->direction);
|
|
list_del(&req->list);
|
|
return ret;
|
|
}
|
|
|
|
dep->flags |= DWC3_EP_BUSY;
|
|
|
|
if (start_new) {
|
|
dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
|
|
dep->number);
|
|
WARN_ON_ONCE(!dep->resource_index);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
|
|
struct dwc3_ep *dep, u32 cur_uf)
|
|
{
|
|
u32 uf;
|
|
|
|
if (list_empty(&dep->request_list)) {
|
|
dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
|
|
dep->name);
|
|
dep->flags |= DWC3_EP_PENDING_REQUEST;
|
|
return;
|
|
}
|
|
|
|
/* 4 micro frames in the future */
|
|
uf = cur_uf + dep->interval * 4;
|
|
|
|
__dwc3_gadget_kick_transfer(dep, uf, 1);
|
|
}
|
|
|
|
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
|
|
struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
|
|
{
|
|
u32 cur_uf, mask;
|
|
|
|
mask = ~(dep->interval - 1);
|
|
cur_uf = event->parameters & mask;
|
|
|
|
__dwc3_gadget_start_isoc(dwc, dep, cur_uf);
|
|
}
|
|
|
|
static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
int ret;
|
|
|
|
req->request.actual = 0;
|
|
req->request.status = -EINPROGRESS;
|
|
req->direction = dep->direction;
|
|
req->epnum = dep->number;
|
|
|
|
/*
|
|
* DWC3 hangs on OUT requests smaller than maxpacket size,
|
|
* so HACK the request length
|
|
*/
|
|
if (dep->direction == 0 &&
|
|
req->request.length < dep->endpoint.maxpacket)
|
|
req->request.length = dep->endpoint.maxpacket;
|
|
|
|
/*
|
|
* We only add to our list of requests now and
|
|
* start consuming the list once we get XferNotReady
|
|
* IRQ.
|
|
*
|
|
* That way, we avoid doing anything that we don't need
|
|
* to do now and defer it until the point we receive a
|
|
* particular token from the Host side.
|
|
*
|
|
* This will also avoid Host cancelling URBs due to too
|
|
* many NAKs.
|
|
*/
|
|
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
|
|
dep->direction);
|
|
if (ret)
|
|
return ret;
|
|
|
|
list_add_tail(&req->list, &dep->request_list);
|
|
|
|
/*
|
|
* There are a few special cases:
|
|
*
|
|
* 1. XferNotReady with empty list of requests. We need to kick the
|
|
* transfer here in that situation, otherwise we will be NAKing
|
|
* forever. If we get XferNotReady before gadget driver has a
|
|
* chance to queue a request, we will ACK the IRQ but won't be
|
|
* able to receive the data until the next request is queued.
|
|
* The following code is handling exactly that.
|
|
*
|
|
*/
|
|
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
|
|
/*
|
|
* If xfernotready is already elapsed and it is a case
|
|
* of isoc transfer, then issue END TRANSFER, so that
|
|
* you can receive xfernotready again and can have
|
|
* notion of current microframe.
|
|
*/
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
if (list_empty(&dep->req_queued)) {
|
|
dwc3_stop_active_transfer(dwc, dep->number, true);
|
|
dep->flags = DWC3_EP_ENABLED;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
|
|
if (ret && ret != -EBUSY)
|
|
dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
|
|
dep->name);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* 2. XferInProgress on Isoc EP with an active transfer. We need to
|
|
* kick the transfer here after queuing a request, otherwise the
|
|
* core may not see the modified TRB(s).
|
|
*/
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
|
|
(dep->flags & DWC3_EP_BUSY) &&
|
|
!(dep->flags & DWC3_EP_MISSED_ISOC)) {
|
|
WARN_ON_ONCE(!dep->resource_index);
|
|
ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
|
|
false);
|
|
if (ret && ret != -EBUSY)
|
|
dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
|
|
dep->name);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* 4. Stream Capable Bulk Endpoints. We need to start the transfer
|
|
* right away, otherwise host will not know we have streams to be
|
|
* handled.
|
|
*/
|
|
if (dep->stream_capable) {
|
|
int ret;
|
|
|
|
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
|
|
if (ret && ret != -EBUSY) {
|
|
dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
|
|
dep->name);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct dwc3_request *req = to_dwc3_request(request);
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
if (!dep->endpoint.desc) {
|
|
dev_dbg(dep->dwc->dev,
|
|
"trying to queue request %p to disabled %s\n", request,
|
|
ep->name);
|
|
ret = -ESHUTDOWN;
|
|
goto out;
|
|
}
|
|
|
|
if (req->dep != dep) {
|
|
WARN(true, "request %p belongs to '%s'\n", request,
|
|
req->dep->name);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
dev_vdbg(dep->dwc->dev, "queing request %p to %s length %d\n",
|
|
request, ep->name, request->length);
|
|
|
|
ret = __dwc3_gadget_ep_queue(dep, req);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct dwc3_request *req = to_dwc3_request(request);
|
|
struct dwc3_request *r = NULL;
|
|
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
|
|
list_for_each_entry(r, &dep->request_list, list) {
|
|
if (r == req)
|
|
break;
|
|
}
|
|
|
|
if (r != req) {
|
|
list_for_each_entry(r, &dep->req_queued, list) {
|
|
if (r == req)
|
|
break;
|
|
}
|
|
if (r == req) {
|
|
/* wait until it is processed */
|
|
dwc3_stop_active_transfer(dwc, dep->number, true);
|
|
goto out1;
|
|
}
|
|
dev_err(dwc->dev, "request %p was not queued to %s\n",
|
|
request, ep->name);
|
|
ret = -EINVAL;
|
|
goto out0;
|
|
}
|
|
|
|
out1:
|
|
/* giveback the request */
|
|
dwc3_gadget_giveback(dep, req, -ECONNRESET);
|
|
|
|
out0:
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
struct dwc3 *dwc = dep->dwc;
|
|
int ret;
|
|
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(¶ms, 0x00, sizeof(params));
|
|
|
|
if (value) {
|
|
if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
|
|
(!list_empty(&dep->req_queued) ||
|
|
!list_empty(&dep->request_list)))) {
|
|
dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
|
|
dep->name);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_SETSTALL, ¶ms);
|
|
if (ret)
|
|
dev_err(dwc->dev, "failed to set STALL on %s\n",
|
|
dep->name);
|
|
else
|
|
dep->flags |= DWC3_EP_STALL;
|
|
} else {
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_CLEARSTALL, ¶ms);
|
|
if (ret)
|
|
dev_err(dwc->dev, "failed to clear STALL on %s\n",
|
|
dep->name);
|
|
else
|
|
dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
ret = __dwc3_gadget_ep_set_halt(dep, value, false);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
|
|
{
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
dep->flags |= DWC3_EP_WEDGE;
|
|
|
|
if (dep->number == 0 || dep->number == 1)
|
|
ret = __dwc3_gadget_ep0_set_halt(ep, 1);
|
|
else
|
|
ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
};
|
|
|
|
static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
|
|
.enable = dwc3_gadget_ep0_enable,
|
|
.disable = dwc3_gadget_ep0_disable,
|
|
.alloc_request = dwc3_gadget_ep_alloc_request,
|
|
.free_request = dwc3_gadget_ep_free_request,
|
|
.queue = dwc3_gadget_ep0_queue,
|
|
.dequeue = dwc3_gadget_ep_dequeue,
|
|
.set_halt = dwc3_gadget_ep0_set_halt,
|
|
.set_wedge = dwc3_gadget_ep_set_wedge,
|
|
};
|
|
|
|
static const struct usb_ep_ops dwc3_gadget_ep_ops = {
|
|
.enable = dwc3_gadget_ep_enable,
|
|
.disable = dwc3_gadget_ep_disable,
|
|
.alloc_request = dwc3_gadget_ep_alloc_request,
|
|
.free_request = dwc3_gadget_ep_free_request,
|
|
.queue = dwc3_gadget_ep_queue,
|
|
.dequeue = dwc3_gadget_ep_dequeue,
|
|
.set_halt = dwc3_gadget_ep_set_halt,
|
|
.set_wedge = dwc3_gadget_ep_set_wedge,
|
|
};
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int dwc3_gadget_get_frame(struct usb_gadget *g)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
u32 reg;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
return DWC3_DSTS_SOFFN(reg);
|
|
}
|
|
|
|
static int dwc3_gadget_wakeup(struct usb_gadget *g)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
|
|
unsigned long timeout;
|
|
unsigned long flags;
|
|
|
|
u32 reg;
|
|
|
|
int ret = 0;
|
|
|
|
u8 link_state;
|
|
u8 speed;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
|
|
/*
|
|
* According to the Databook Remote wakeup request should
|
|
* be issued only when the device is in early suspend state.
|
|
*
|
|
* We can check that via USB Link State bits in DSTS register.
|
|
*/
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
|
|
speed = reg & DWC3_DSTS_CONNECTSPD;
|
|
if (speed == DWC3_DSTS_SUPERSPEED) {
|
|
dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
link_state = DWC3_DSTS_USBLNKST(reg);
|
|
|
|
switch (link_state) {
|
|
case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
|
|
case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
|
|
break;
|
|
default:
|
|
dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
|
|
link_state);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
|
|
if (ret < 0) {
|
|
dev_err(dwc->dev, "failed to put link in Recovery\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Recent versions do this automatically */
|
|
if (dwc->revision < DWC3_REVISION_194A) {
|
|
/* write zeroes to Link Change Request */
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
}
|
|
|
|
/* poll until Link State changes to ON */
|
|
timeout = 1000;
|
|
|
|
while (timeout--) {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
|
|
/* in HS, means ON */
|
|
if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
|
|
break;
|
|
}
|
|
|
|
if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
|
|
dev_err(dwc->dev, "failed to send remote wakeup\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
|
|
int is_selfpowered)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
dwc->is_selfpowered = !!is_selfpowered;
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
|
|
{
|
|
u32 reg;
|
|
u32 timeout = 500;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
if (is_on) {
|
|
if (dwc->revision <= DWC3_REVISION_187A) {
|
|
reg &= ~DWC3_DCTL_TRGTULST_MASK;
|
|
reg |= DWC3_DCTL_TRGTULST_RX_DET;
|
|
}
|
|
|
|
if (dwc->revision >= DWC3_REVISION_194A)
|
|
reg &= ~DWC3_DCTL_KEEP_CONNECT;
|
|
reg |= DWC3_DCTL_RUN_STOP;
|
|
|
|
if (dwc->has_hibernation)
|
|
reg |= DWC3_DCTL_KEEP_CONNECT;
|
|
|
|
dwc->pullups_connected = true;
|
|
} else {
|
|
reg &= ~DWC3_DCTL_RUN_STOP;
|
|
|
|
if (dwc->has_hibernation && !suspend)
|
|
reg &= ~DWC3_DCTL_KEEP_CONNECT;
|
|
|
|
dwc->pullups_connected = false;
|
|
}
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
do {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
if (is_on) {
|
|
if (!(reg & DWC3_DSTS_DEVCTRLHLT))
|
|
break;
|
|
} else {
|
|
if (reg & DWC3_DSTS_DEVCTRLHLT)
|
|
break;
|
|
}
|
|
timeout--;
|
|
if (!timeout)
|
|
return -ETIMEDOUT;
|
|
udelay(1);
|
|
} while (1);
|
|
|
|
dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
|
|
dwc->gadget_driver
|
|
? dwc->gadget_driver->function : "no-function",
|
|
is_on ? "connect" : "disconnect");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
is_on = !!is_on;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
ret = dwc3_gadget_run_stop(dwc, is_on, false);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Enable all but Start and End of Frame IRQs */
|
|
reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
|
|
DWC3_DEVTEN_EVNTOVERFLOWEN |
|
|
DWC3_DEVTEN_CMDCMPLTEN |
|
|
DWC3_DEVTEN_ERRTICERREN |
|
|
DWC3_DEVTEN_WKUPEVTEN |
|
|
DWC3_DEVTEN_ULSTCNGEN |
|
|
DWC3_DEVTEN_CONNECTDONEEN |
|
|
DWC3_DEVTEN_USBRSTEN |
|
|
DWC3_DEVTEN_DISCONNEVTEN);
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
|
|
}
|
|
|
|
static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
|
|
{
|
|
/* mask all interrupts */
|
|
dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
|
|
}
|
|
|
|
static int dwc3_gadget_start(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
struct dwc3_ep *dep;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
u32 reg;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
|
|
if (dwc->gadget_driver) {
|
|
dev_err(dwc->dev, "%s is already bound to %s\n",
|
|
dwc->gadget.name,
|
|
dwc->gadget_driver->function);
|
|
ret = -EBUSY;
|
|
goto err1;
|
|
}
|
|
|
|
dwc->gadget_driver = driver;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
|
|
reg &= ~(DWC3_DCFG_SPEED_MASK);
|
|
|
|
/**
|
|
* WORKAROUND: DWC3 revision < 2.20a have an issue
|
|
* which would cause metastability state on Run/Stop
|
|
* bit if we try to force the IP to USB2-only mode.
|
|
*
|
|
* Because of that, we cannot configure the IP to any
|
|
* speed other than the SuperSpeed
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000525659: Clock Domain Crossing on DCTL in
|
|
* USB 2.0 Mode
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_220A) {
|
|
reg |= DWC3_DCFG_SUPERSPEED;
|
|
} else {
|
|
switch (dwc->maximum_speed) {
|
|
case USB_SPEED_LOW:
|
|
reg |= DWC3_DSTS_LOWSPEED;
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
reg |= DWC3_DSTS_FULLSPEED1;
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
reg |= DWC3_DSTS_HIGHSPEED;
|
|
break;
|
|
case USB_SPEED_SUPER: /* FALLTHROUGH */
|
|
case USB_SPEED_UNKNOWN: /* FALTHROUGH */
|
|
default:
|
|
reg |= DWC3_DSTS_SUPERSPEED;
|
|
}
|
|
}
|
|
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
|
|
|
|
dwc->start_config_issued = false;
|
|
|
|
/* Start with SuperSpeed Default */
|
|
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
|
|
dep = dwc->eps[0];
|
|
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
|
|
false);
|
|
if (ret) {
|
|
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
|
|
goto err2;
|
|
}
|
|
|
|
dep = dwc->eps[1];
|
|
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
|
|
false);
|
|
if (ret) {
|
|
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
|
|
goto err3;
|
|
}
|
|
|
|
/* begin to receive SETUP packets */
|
|
dwc->ep0state = EP0_SETUP_PHASE;
|
|
dwc3_ep0_out_start(dwc);
|
|
|
|
dwc3_gadget_enable_irq(dwc);
|
|
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return 0;
|
|
|
|
err3:
|
|
__dwc3_gadget_ep_disable(dwc->eps[0]);
|
|
|
|
err2:
|
|
dwc->gadget_driver = NULL;
|
|
|
|
err1:
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_gadget_stop(struct usb_gadget *g)
|
|
{
|
|
struct dwc3 *dwc = gadget_to_dwc(g);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
|
|
dwc3_gadget_disable_irq(dwc);
|
|
__dwc3_gadget_ep_disable(dwc->eps[0]);
|
|
__dwc3_gadget_ep_disable(dwc->eps[1]);
|
|
|
|
dwc->gadget_driver = NULL;
|
|
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_gadget_ops dwc3_gadget_ops = {
|
|
.get_frame = dwc3_gadget_get_frame,
|
|
.wakeup = dwc3_gadget_wakeup,
|
|
.set_selfpowered = dwc3_gadget_set_selfpowered,
|
|
.pullup = dwc3_gadget_pullup,
|
|
.udc_start = dwc3_gadget_start,
|
|
.udc_stop = dwc3_gadget_stop,
|
|
};
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
|
|
u8 num, u32 direction)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u8 i;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
u8 epnum = (i << 1) | (!!direction);
|
|
|
|
dep = kzalloc(sizeof(*dep), GFP_KERNEL);
|
|
if (!dep)
|
|
return -ENOMEM;
|
|
|
|
dep->dwc = dwc;
|
|
dep->number = epnum;
|
|
dep->direction = !!direction;
|
|
dwc->eps[epnum] = dep;
|
|
|
|
snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
|
|
(epnum & 1) ? "in" : "out");
|
|
|
|
dep->endpoint.name = dep->name;
|
|
|
|
dev_vdbg(dwc->dev, "initializing %s\n", dep->name);
|
|
|
|
if (epnum == 0 || epnum == 1) {
|
|
usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
|
|
dep->endpoint.maxburst = 1;
|
|
dep->endpoint.ops = &dwc3_gadget_ep0_ops;
|
|
if (!epnum)
|
|
dwc->gadget.ep0 = &dep->endpoint;
|
|
} else {
|
|
int ret;
|
|
|
|
usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
|
|
dep->endpoint.max_streams = 15;
|
|
dep->endpoint.ops = &dwc3_gadget_ep_ops;
|
|
list_add_tail(&dep->endpoint.ep_list,
|
|
&dwc->gadget.ep_list);
|
|
|
|
ret = dwc3_alloc_trb_pool(dep);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&dep->request_list);
|
|
INIT_LIST_HEAD(&dep->req_queued);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
|
|
{
|
|
int ret;
|
|
|
|
INIT_LIST_HEAD(&dwc->gadget.ep_list);
|
|
|
|
ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
|
|
if (ret < 0) {
|
|
dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
|
|
if (ret < 0) {
|
|
dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u8 epnum;
|
|
|
|
for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
|
|
dep = dwc->eps[epnum];
|
|
if (!dep)
|
|
continue;
|
|
/*
|
|
* Physical endpoints 0 and 1 are special; they form the
|
|
* bi-directional USB endpoint 0.
|
|
*
|
|
* For those two physical endpoints, we don't allocate a TRB
|
|
* pool nor do we add them the endpoints list. Due to that, we
|
|
* shouldn't do these two operations otherwise we would end up
|
|
* with all sorts of bugs when removing dwc3.ko.
|
|
*/
|
|
if (epnum != 0 && epnum != 1) {
|
|
dwc3_free_trb_pool(dep);
|
|
list_del(&dep->endpoint.ep_list);
|
|
}
|
|
|
|
kfree(dep);
|
|
}
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
|
|
struct dwc3_request *req, struct dwc3_trb *trb,
|
|
const struct dwc3_event_depevt *event, int status)
|
|
{
|
|
unsigned int count;
|
|
unsigned int s_pkt = 0;
|
|
unsigned int trb_status;
|
|
|
|
if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
|
|
/*
|
|
* We continue despite the error. There is not much we
|
|
* can do. If we don't clean it up we loop forever. If
|
|
* we skip the TRB then it gets overwritten after a
|
|
* while since we use them in a ring buffer. A BUG()
|
|
* would help. Lets hope that if this occurs, someone
|
|
* fixes the root cause instead of looking away :)
|
|
*/
|
|
dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
|
|
dep->name, trb);
|
|
count = trb->size & DWC3_TRB_SIZE_MASK;
|
|
|
|
if (dep->direction) {
|
|
if (count) {
|
|
trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
|
|
if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
|
|
dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
|
|
dep->name);
|
|
/*
|
|
* If missed isoc occurred and there is
|
|
* no request queued then issue END
|
|
* TRANSFER, so that core generates
|
|
* next xfernotready and we will issue
|
|
* a fresh START TRANSFER.
|
|
* If there are still queued request
|
|
* then wait, do not issue either END
|
|
* or UPDATE TRANSFER, just attach next
|
|
* request in request_list during
|
|
* giveback.If any future queued request
|
|
* is successfully transferred then we
|
|
* will issue UPDATE TRANSFER for all
|
|
* request in the request_list.
|
|
*/
|
|
dep->flags |= DWC3_EP_MISSED_ISOC;
|
|
} else {
|
|
dev_err(dwc->dev, "incomplete IN transfer %s\n",
|
|
dep->name);
|
|
status = -ECONNRESET;
|
|
}
|
|
} else {
|
|
dep->flags &= ~DWC3_EP_MISSED_ISOC;
|
|
}
|
|
} else {
|
|
if (count && (event->status & DEPEVT_STATUS_SHORT))
|
|
s_pkt = 1;
|
|
}
|
|
|
|
/*
|
|
* We assume here we will always receive the entire data block
|
|
* which we should receive. Meaning, if we program RX to
|
|
* receive 4K but we receive only 2K, we assume that's all we
|
|
* should receive and we simply bounce the request back to the
|
|
* gadget driver for further processing.
|
|
*/
|
|
req->request.actual += req->request.length - count;
|
|
if (s_pkt)
|
|
return 1;
|
|
if ((event->status & DEPEVT_STATUS_LST) &&
|
|
(trb->ctrl & (DWC3_TRB_CTRL_LST |
|
|
DWC3_TRB_CTRL_HWO)))
|
|
return 1;
|
|
if ((event->status & DEPEVT_STATUS_IOC) &&
|
|
(trb->ctrl & DWC3_TRB_CTRL_IOC))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
|
|
const struct dwc3_event_depevt *event, int status)
|
|
{
|
|
struct dwc3_request *req;
|
|
struct dwc3_trb *trb;
|
|
unsigned int slot;
|
|
|
|
req = next_request(&dep->req_queued);
|
|
if (!req) {
|
|
WARN_ON_ONCE(1);
|
|
return 1;
|
|
}
|
|
|
|
slot = req->start_slot;
|
|
if ((slot == DWC3_TRB_NUM - 1) &&
|
|
usb_endpoint_xfer_isoc(dep->endpoint.desc))
|
|
slot++;
|
|
slot %= DWC3_TRB_NUM;
|
|
trb = &dep->trb_pool[slot];
|
|
|
|
dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
|
|
__dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status);
|
|
dwc3_gadget_giveback(dep, req, status);
|
|
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
|
|
list_empty(&dep->req_queued)) {
|
|
if (list_empty(&dep->request_list)) {
|
|
/*
|
|
* If there is no entry in request list then do
|
|
* not issue END TRANSFER now. Just set PENDING
|
|
* flag, so that END TRANSFER is issued when an
|
|
* entry is added into request list.
|
|
*/
|
|
dep->flags = DWC3_EP_PENDING_REQUEST;
|
|
} else {
|
|
dwc3_stop_active_transfer(dwc, dep->number, true);
|
|
dep->flags = DWC3_EP_ENABLED;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
|
|
struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
|
|
{
|
|
unsigned status = 0;
|
|
int clean_busy;
|
|
|
|
if (event->status & DEPEVT_STATUS_BUSERR)
|
|
status = -ECONNRESET;
|
|
|
|
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
|
|
if (clean_busy)
|
|
dep->flags &= ~DWC3_EP_BUSY;
|
|
|
|
/*
|
|
* WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
|
|
* See dwc3_gadget_linksts_change_interrupt() for 1st half.
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_183A) {
|
|
u32 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
|
|
dep = dwc->eps[i];
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED))
|
|
continue;
|
|
|
|
if (!list_empty(&dep->req_queued))
|
|
return;
|
|
}
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg |= dwc->u1u2;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
dwc->u1u2 = 0;
|
|
}
|
|
}
|
|
|
|
static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u8 epnum = event->endpoint_number;
|
|
|
|
dep = dwc->eps[epnum];
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED))
|
|
return;
|
|
|
|
if (epnum == 0 || epnum == 1) {
|
|
dwc3_ep0_interrupt(dwc, event);
|
|
return;
|
|
}
|
|
|
|
switch (event->endpoint_event) {
|
|
case DWC3_DEPEVT_XFERCOMPLETE:
|
|
dep->resource_index = 0;
|
|
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
|
|
dep->name);
|
|
return;
|
|
}
|
|
|
|
dwc3_endpoint_transfer_complete(dwc, dep, event);
|
|
break;
|
|
case DWC3_DEPEVT_XFERINPROGRESS:
|
|
dwc3_endpoint_transfer_complete(dwc, dep, event);
|
|
break;
|
|
case DWC3_DEPEVT_XFERNOTREADY:
|
|
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
|
|
dwc3_gadget_start_isoc(dwc, dep, event);
|
|
} else {
|
|
int ret;
|
|
|
|
dev_vdbg(dwc->dev, "%s: reason %s\n",
|
|
dep->name, event->status &
|
|
DEPEVT_STATUS_TRANSFER_ACTIVE
|
|
? "Transfer Active"
|
|
: "Transfer Not Active");
|
|
|
|
ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
|
|
if (!ret || ret == -EBUSY)
|
|
return;
|
|
|
|
dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
|
|
dep->name);
|
|
}
|
|
|
|
break;
|
|
case DWC3_DEPEVT_STREAMEVT:
|
|
if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
|
|
dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
|
|
dep->name);
|
|
return;
|
|
}
|
|
|
|
switch (event->status) {
|
|
case DEPEVT_STREAMEVT_FOUND:
|
|
dev_vdbg(dwc->dev, "Stream %d found and started\n",
|
|
event->parameters);
|
|
|
|
break;
|
|
case DEPEVT_STREAMEVT_NOTFOUND:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
|
|
}
|
|
break;
|
|
case DWC3_DEPEVT_RXTXFIFOEVT:
|
|
dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
|
|
break;
|
|
case DWC3_DEPEVT_EPCMDCMPLT:
|
|
dev_vdbg(dwc->dev, "Endpoint Command Complete\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void dwc3_disconnect_gadget(struct dwc3 *dwc)
|
|
{
|
|
if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
|
|
spin_unlock(&dwc->lock);
|
|
dwc->gadget_driver->disconnect(&dwc->gadget);
|
|
spin_lock(&dwc->lock);
|
|
}
|
|
}
|
|
|
|
static void dwc3_suspend_gadget(struct dwc3 *dwc)
|
|
{
|
|
if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
|
|
spin_unlock(&dwc->lock);
|
|
dwc->gadget_driver->suspend(&dwc->gadget);
|
|
spin_lock(&dwc->lock);
|
|
}
|
|
}
|
|
|
|
static void dwc3_resume_gadget(struct dwc3 *dwc)
|
|
{
|
|
if (dwc->gadget_driver && dwc->gadget_driver->resume) {
|
|
spin_unlock(&dwc->lock);
|
|
dwc->gadget_driver->resume(&dwc->gadget);
|
|
}
|
|
}
|
|
|
|
static void dwc3_reset_gadget(struct dwc3 *dwc)
|
|
{
|
|
if (!dwc->gadget_driver)
|
|
return;
|
|
|
|
if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
|
|
spin_unlock(&dwc->lock);
|
|
usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
|
|
spin_lock(&dwc->lock);
|
|
}
|
|
}
|
|
|
|
static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
dep = dwc->eps[epnum];
|
|
|
|
if (!dep->resource_index)
|
|
return;
|
|
|
|
/*
|
|
* NOTICE: We are violating what the Databook says about the
|
|
* EndTransfer command. Ideally we would _always_ wait for the
|
|
* EndTransfer Command Completion IRQ, but that's causing too
|
|
* much trouble synchronizing between us and gadget driver.
|
|
*
|
|
* We have discussed this with the IP Provider and it was
|
|
* suggested to giveback all requests here, but give HW some
|
|
* extra time to synchronize with the interconnect. We're using
|
|
* an arbitraty 100us delay for that.
|
|
*
|
|
* Note also that a similar handling was tested by Synopsys
|
|
* (thanks a lot Paul) and nothing bad has come out of it.
|
|
* In short, what we're doing is:
|
|
*
|
|
* - Issue EndTransfer WITH CMDIOC bit set
|
|
* - Wait 100us
|
|
*/
|
|
|
|
cmd = DWC3_DEPCMD_ENDTRANSFER;
|
|
cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
|
|
cmd |= DWC3_DEPCMD_CMDIOC;
|
|
cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
|
|
memset(¶ms, 0, sizeof(params));
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
|
|
WARN_ON_ONCE(ret);
|
|
dep->resource_index = 0;
|
|
dep->flags &= ~DWC3_EP_BUSY;
|
|
udelay(100);
|
|
}
|
|
|
|
static void dwc3_stop_active_transfers(struct dwc3 *dwc)
|
|
{
|
|
u32 epnum;
|
|
|
|
for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
|
|
struct dwc3_ep *dep;
|
|
|
|
dep = dwc->eps[epnum];
|
|
if (!dep)
|
|
continue;
|
|
|
|
if (!(dep->flags & DWC3_EP_ENABLED))
|
|
continue;
|
|
|
|
dwc3_remove_requests(dwc, dep);
|
|
}
|
|
}
|
|
|
|
static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
|
|
{
|
|
u32 epnum;
|
|
|
|
for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
|
|
struct dwc3_ep *dep;
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
int ret;
|
|
|
|
dep = dwc->eps[epnum];
|
|
if (!dep)
|
|
continue;
|
|
|
|
if (!(dep->flags & DWC3_EP_STALL))
|
|
continue;
|
|
|
|
dep->flags &= ~DWC3_EP_STALL;
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_CLEARSTALL, ¶ms);
|
|
WARN_ON_ONCE(ret);
|
|
}
|
|
}
|
|
|
|
static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
|
|
{
|
|
int reg;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_INITU1ENA;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
reg &= ~DWC3_DCTL_INITU2ENA;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
dwc3_disconnect_gadget(dwc);
|
|
dwc->start_config_issued = false;
|
|
|
|
dwc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
dwc->setup_packet_pending = false;
|
|
usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
|
|
}
|
|
|
|
static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* WORKAROUND: DWC3 revisions <1.88a have an issue which
|
|
* would cause a missing Disconnect Event if there's a
|
|
* pending Setup Packet in the FIFO.
|
|
*
|
|
* There's no suggested workaround on the official Bug
|
|
* report, which states that "unless the driver/application
|
|
* is doing any special handling of a disconnect event,
|
|
* there is no functional issue".
|
|
*
|
|
* Unfortunately, it turns out that we _do_ some special
|
|
* handling of a disconnect event, namely complete all
|
|
* pending transfers, notify gadget driver of the
|
|
* disconnection, and so on.
|
|
*
|
|
* Our suggested workaround is to follow the Disconnect
|
|
* Event steps here, instead, based on a setup_packet_pending
|
|
* flag. Such flag gets set whenever we have a XferNotReady
|
|
* event on EP0 and gets cleared on XferComplete for the
|
|
* same endpoint.
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000466709: RTL: Device : Disconnect event not
|
|
* generated if setup packet pending in FIFO
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_188A) {
|
|
if (dwc->setup_packet_pending)
|
|
dwc3_gadget_disconnect_interrupt(dwc);
|
|
}
|
|
|
|
dwc3_reset_gadget(dwc);
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
dwc->test_mode = false;
|
|
|
|
dwc3_stop_active_transfers(dwc);
|
|
dwc3_clear_stall_all_ep(dwc);
|
|
dwc->start_config_issued = false;
|
|
|
|
/* Reset device address to zero */
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
|
|
reg &= ~(DWC3_DCFG_DEVADDR_MASK);
|
|
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
|
|
}
|
|
|
|
static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
|
|
{
|
|
u32 reg;
|
|
u32 usb30_clock = DWC3_GCTL_CLK_BUS;
|
|
|
|
/*
|
|
* We change the clock only at SS but I dunno why I would want to do
|
|
* this. Maybe it becomes part of the power saving plan.
|
|
*/
|
|
|
|
if (speed != DWC3_DSTS_SUPERSPEED)
|
|
return;
|
|
|
|
/*
|
|
* RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
|
|
* each time on Connect Done.
|
|
*/
|
|
if (!usb30_clock)
|
|
return;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
|
|
reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
|
|
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
|
|
}
|
|
|
|
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
int ret;
|
|
u32 reg;
|
|
u8 speed;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
|
|
speed = reg & DWC3_DSTS_CONNECTSPD;
|
|
dwc->speed = speed;
|
|
|
|
dwc3_update_ram_clk_sel(dwc, speed);
|
|
|
|
switch (speed) {
|
|
case DWC3_DCFG_SUPERSPEED:
|
|
/*
|
|
* WORKAROUND: DWC3 revisions <1.90a have an issue which
|
|
* would cause a missing USB3 Reset event.
|
|
*
|
|
* In such situations, we should force a USB3 Reset
|
|
* event by calling our dwc3_gadget_reset_interrupt()
|
|
* routine.
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000483510: RTL: SS : USB3 reset event may
|
|
* not be generated always when the link enters poll
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_190A)
|
|
dwc3_gadget_reset_interrupt(dwc);
|
|
|
|
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
dwc->gadget.ep0->maxpacket = 512;
|
|
dwc->gadget.speed = USB_SPEED_SUPER;
|
|
break;
|
|
case DWC3_DCFG_HIGHSPEED:
|
|
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
|
|
dwc->gadget.ep0->maxpacket = 64;
|
|
dwc->gadget.speed = USB_SPEED_HIGH;
|
|
break;
|
|
case DWC3_DCFG_FULLSPEED2:
|
|
case DWC3_DCFG_FULLSPEED1:
|
|
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
|
|
dwc->gadget.ep0->maxpacket = 64;
|
|
dwc->gadget.speed = USB_SPEED_FULL;
|
|
break;
|
|
case DWC3_DCFG_LOWSPEED:
|
|
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
|
|
dwc->gadget.ep0->maxpacket = 8;
|
|
dwc->gadget.speed = USB_SPEED_LOW;
|
|
break;
|
|
}
|
|
|
|
/* Enable USB2 LPM Capability */
|
|
|
|
if ((dwc->revision > DWC3_REVISION_194A)
|
|
&& (speed != DWC3_DCFG_SUPERSPEED)) {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
|
|
reg |= DWC3_DCFG_LPM_CAP;
|
|
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
|
|
|
|
reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
|
|
|
|
/*
|
|
* When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
|
|
* DCFG.LPMCap is set, core responses with an ACK and the
|
|
* BESL value in the LPM token is less than or equal to LPM
|
|
* NYET threshold.
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
|
|
WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
|
|
|
|
if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
|
|
reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
} else {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
}
|
|
|
|
dep = dwc->eps[0];
|
|
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
|
|
false);
|
|
if (ret) {
|
|
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
|
|
return;
|
|
}
|
|
|
|
dep = dwc->eps[1];
|
|
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
|
|
false);
|
|
if (ret) {
|
|
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Configure PHY via GUSB3PIPECTLn if required.
|
|
*
|
|
* Update GTXFIFOSIZn
|
|
*
|
|
* In both cases reset values should be sufficient.
|
|
*/
|
|
}
|
|
|
|
static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
|
|
{
|
|
/*
|
|
* TODO take core out of low power mode when that's
|
|
* implemented.
|
|
*/
|
|
|
|
dwc->gadget_driver->resume(&dwc->gadget);
|
|
}
|
|
|
|
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
|
|
unsigned int evtinfo)
|
|
{
|
|
enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
|
|
unsigned int pwropt;
|
|
|
|
/*
|
|
* WORKAROUND: DWC3 < 2.50a have an issue when configured without
|
|
* Hibernation mode enabled which would show up when device detects
|
|
* host-initiated U3 exit.
|
|
*
|
|
* In that case, device will generate a Link State Change Interrupt
|
|
* from U3 to RESUME which is only necessary if Hibernation is
|
|
* configured in.
|
|
*
|
|
* There are no functional changes due to such spurious event and we
|
|
* just need to ignore it.
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
|
|
* operational mode
|
|
*/
|
|
pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
|
|
if ((dwc->revision < DWC3_REVISION_250A) &&
|
|
(pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
|
|
if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
|
|
(next == DWC3_LINK_STATE_RESUME)) {
|
|
dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
|
|
* on the link partner, the USB session might do multiple entry/exit
|
|
* of low power states before a transfer takes place.
|
|
*
|
|
* Due to this problem, we might experience lower throughput. The
|
|
* suggested workaround is to disable DCTL[12:9] bits if we're
|
|
* transitioning from U1/U2 to U0 and enable those bits again
|
|
* after a transfer completes and there are no pending transfers
|
|
* on any of the enabled endpoints.
|
|
*
|
|
* This is the first half of that workaround.
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
|
|
* core send LGO_Ux entering U0
|
|
*/
|
|
if (dwc->revision < DWC3_REVISION_183A) {
|
|
if (next == DWC3_LINK_STATE_U0) {
|
|
u32 u1u2;
|
|
u32 reg;
|
|
|
|
switch (dwc->link_state) {
|
|
case DWC3_LINK_STATE_U1:
|
|
case DWC3_LINK_STATE_U2:
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
u1u2 = reg & (DWC3_DCTL_INITU2ENA
|
|
| DWC3_DCTL_ACCEPTU2ENA
|
|
| DWC3_DCTL_INITU1ENA
|
|
| DWC3_DCTL_ACCEPTU1ENA);
|
|
|
|
if (!dwc->u1u2)
|
|
dwc->u1u2 = reg & u1u2;
|
|
|
|
reg &= ~u1u2;
|
|
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
break;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
switch (next) {
|
|
case DWC3_LINK_STATE_U1:
|
|
if (dwc->speed == USB_SPEED_SUPER)
|
|
dwc3_suspend_gadget(dwc);
|
|
break;
|
|
case DWC3_LINK_STATE_U2:
|
|
case DWC3_LINK_STATE_U3:
|
|
dwc3_suspend_gadget(dwc);
|
|
break;
|
|
case DWC3_LINK_STATE_RESUME:
|
|
dwc3_resume_gadget(dwc);
|
|
break;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
|
|
dwc->link_state = next;
|
|
}
|
|
|
|
static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
|
|
unsigned int evtinfo)
|
|
{
|
|
unsigned int is_ss = evtinfo & (1UL << 4);
|
|
|
|
/**
|
|
* WORKAROUND: DWC3 revison 2.20a with hibernation support
|
|
* have a known issue which can cause USB CV TD.9.23 to fail
|
|
* randomly.
|
|
*
|
|
* Because of this issue, core could generate bogus hibernation
|
|
* events which SW needs to ignore.
|
|
*
|
|
* Refers to:
|
|
*
|
|
* STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
|
|
* Device Fallback from SuperSpeed
|
|
*/
|
|
if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
|
|
return;
|
|
|
|
/* enter hibernation here */
|
|
}
|
|
|
|
static void dwc3_gadget_interrupt(struct dwc3 *dwc,
|
|
const struct dwc3_event_devt *event)
|
|
{
|
|
switch (event->type) {
|
|
case DWC3_DEVICE_EVENT_DISCONNECT:
|
|
dwc3_gadget_disconnect_interrupt(dwc);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_RESET:
|
|
dwc3_gadget_reset_interrupt(dwc);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_CONNECT_DONE:
|
|
dwc3_gadget_conndone_interrupt(dwc);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_WAKEUP:
|
|
dwc3_gadget_wakeup_interrupt(dwc);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_HIBER_REQ:
|
|
if (!dwc->has_hibernation) {
|
|
WARN(1 ,"unexpected hibernation event\n");
|
|
break;
|
|
}
|
|
dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
|
|
dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
|
|
break;
|
|
case DWC3_DEVICE_EVENT_EOPF:
|
|
dev_vdbg(dwc->dev, "End of Periodic Frame\n");
|
|
break;
|
|
case DWC3_DEVICE_EVENT_SOF:
|
|
dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
|
|
break;
|
|
case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
|
|
dev_vdbg(dwc->dev, "Erratic Error\n");
|
|
break;
|
|
case DWC3_DEVICE_EVENT_CMD_CMPL:
|
|
dev_vdbg(dwc->dev, "Command Complete\n");
|
|
break;
|
|
case DWC3_DEVICE_EVENT_OVERFLOW:
|
|
dev_vdbg(dwc->dev, "Overflow\n");
|
|
break;
|
|
default:
|
|
dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
|
|
}
|
|
}
|
|
|
|
static void dwc3_process_event_entry(struct dwc3 *dwc,
|
|
const union dwc3_event *event)
|
|
{
|
|
/* Endpoint IRQ, handle it and return early */
|
|
if (event->type.is_devspec == 0) {
|
|
/* depevt */
|
|
return dwc3_endpoint_interrupt(dwc, &event->depevt);
|
|
}
|
|
|
|
switch (event->type.type) {
|
|
case DWC3_EVENT_TYPE_DEV:
|
|
dwc3_gadget_interrupt(dwc, &event->devt);
|
|
break;
|
|
/* REVISIT what to do with Carkit and I2C events ? */
|
|
default:
|
|
dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
|
|
{
|
|
struct dwc3_event_buffer *evt;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
int left;
|
|
u32 reg;
|
|
|
|
evt = dwc->ev_buffs[buf];
|
|
left = evt->count;
|
|
|
|
if (!(evt->flags & DWC3_EVENT_PENDING))
|
|
return IRQ_NONE;
|
|
|
|
while (left > 0) {
|
|
union dwc3_event event;
|
|
|
|
event.raw = *(u32 *) (evt->buf + evt->lpos);
|
|
|
|
dwc3_process_event_entry(dwc, &event);
|
|
|
|
/*
|
|
* FIXME we wrap around correctly to the next entry as
|
|
* almost all entries are 4 bytes in size. There is one
|
|
* entry which has 12 bytes which is a regular entry
|
|
* followed by 8 bytes data. ATM I don't know how
|
|
* things are organized if we get next to the a
|
|
* boundary so I worry about that once we try to handle
|
|
* that.
|
|
*/
|
|
evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
|
|
left -= 4;
|
|
|
|
dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
|
|
}
|
|
|
|
evt->count = 0;
|
|
evt->flags &= ~DWC3_EVENT_PENDING;
|
|
ret = IRQ_HANDLED;
|
|
|
|
/* Unmask interrupt */
|
|
reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
|
|
reg &= ~DWC3_GEVNTSIZ_INTMASK;
|
|
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
|
|
{
|
|
struct dwc3 *dwc = _dwc;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
|
|
for (i = 0; i < dwc->num_event_buffers; i++)
|
|
ret |= dwc3_process_event_buf(dwc, i);
|
|
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
|
|
{
|
|
struct dwc3_event_buffer *evt;
|
|
u32 count;
|
|
u32 reg;
|
|
|
|
evt = dwc->ev_buffs[buf];
|
|
|
|
count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
|
|
count &= DWC3_GEVNTCOUNT_MASK;
|
|
if (!count)
|
|
return IRQ_NONE;
|
|
|
|
evt->count = count;
|
|
evt->flags |= DWC3_EVENT_PENDING;
|
|
|
|
/* Mask interrupt */
|
|
reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
|
|
reg |= DWC3_GEVNTSIZ_INTMASK;
|
|
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
|
|
{
|
|
struct dwc3 *dwc = _dwc;
|
|
int i;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
spin_lock(&dwc->lock);
|
|
|
|
for (i = 0; i < dwc->num_event_buffers; i++) {
|
|
irqreturn_t status;
|
|
|
|
status = dwc3_check_event_buf(dwc, i);
|
|
if (status == IRQ_WAKE_THREAD)
|
|
ret = status;
|
|
}
|
|
|
|
spin_unlock(&dwc->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* dwc3_gadget_init - Initializes gadget related registers
|
|
* @dwc: pointer to our controller context structure
|
|
*
|
|
* Returns 0 on success otherwise negative errno.
|
|
*/
|
|
int dwc3_gadget_init(struct dwc3 *dwc)
|
|
{
|
|
int ret;
|
|
|
|
dwc->ctrl_req = dma_alloc_coherent(sizeof(*dwc->ctrl_req),
|
|
(unsigned long *)&dwc->ctrl_req_addr);
|
|
if (!dwc->ctrl_req) {
|
|
dev_err(dwc->dev, "failed to allocate ctrl request\n");
|
|
ret = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
dwc->ep0_trb = dma_alloc_coherent(sizeof(*dwc->ep0_trb) * 2,
|
|
(unsigned long *)&dwc->ep0_trb_addr);
|
|
if (!dwc->ep0_trb) {
|
|
dev_err(dwc->dev, "failed to allocate ep0 trb\n");
|
|
ret = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
dwc->setup_buf = memalign(CONFIG_SYS_CACHELINE_SIZE,
|
|
DWC3_EP0_BOUNCE_SIZE);
|
|
if (!dwc->setup_buf) {
|
|
ret = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
dwc->ep0_bounce = dma_alloc_coherent(DWC3_EP0_BOUNCE_SIZE,
|
|
(unsigned long *)&dwc->ep0_bounce_addr);
|
|
if (!dwc->ep0_bounce) {
|
|
dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
|
|
ret = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
dwc->gadget.ops = &dwc3_gadget_ops;
|
|
dwc->gadget.max_speed = USB_SPEED_SUPER;
|
|
dwc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
dwc->gadget.name = "dwc3-gadget";
|
|
|
|
/*
|
|
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
|
|
* on ep out.
|
|
*/
|
|
dwc->gadget.quirk_ep_out_aligned_size = true;
|
|
|
|
/*
|
|
* REVISIT: Here we should clear all pending IRQs to be
|
|
* sure we're starting from a well known location.
|
|
*/
|
|
|
|
ret = dwc3_gadget_init_endpoints(dwc);
|
|
if (ret)
|
|
goto err4;
|
|
|
|
ret = usb_add_gadget_udc((struct device *)dwc->dev, &dwc->gadget);
|
|
if (ret) {
|
|
dev_err(dwc->dev, "failed to register udc\n");
|
|
goto err4;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err4:
|
|
dwc3_gadget_free_endpoints(dwc);
|
|
dma_free_coherent(dwc->ep0_bounce);
|
|
|
|
err3:
|
|
kfree(dwc->setup_buf);
|
|
|
|
err2:
|
|
dma_free_coherent(dwc->ep0_trb);
|
|
|
|
err1:
|
|
dma_free_coherent(dwc->ctrl_req);
|
|
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
void dwc3_gadget_exit(struct dwc3 *dwc)
|
|
{
|
|
usb_del_gadget_udc(&dwc->gadget);
|
|
|
|
dwc3_gadget_free_endpoints(dwc);
|
|
|
|
dma_free_coherent(dwc->ep0_bounce);
|
|
|
|
kfree(dwc->setup_buf);
|
|
|
|
dma_free_coherent(dwc->ep0_trb);
|
|
|
|
dma_free_coherent(dwc->ctrl_req);
|
|
}
|
|
|
|
/**
|
|
* dwc3_gadget_uboot_handle_interrupt - handle dwc3 gadget interrupt
|
|
* @dwc: struct dwce *
|
|
*
|
|
* Handles ep0 and gadget interrupt
|
|
*
|
|
* Should be called from dwc3 core.
|
|
*/
|
|
void dwc3_gadget_uboot_handle_interrupt(struct dwc3 *dwc)
|
|
{
|
|
int ret = dwc3_interrupt(0, dwc);
|
|
|
|
if (ret == IRQ_WAKE_THREAD) {
|
|
int i;
|
|
struct dwc3_event_buffer *evt;
|
|
|
|
dwc3_thread_interrupt(0, dwc);
|
|
|
|
/* Clean + Invalidate the buffers after touching them */
|
|
for (i = 0; i < dwc->num_event_buffers; i++) {
|
|
evt = dwc->ev_buffs[i];
|
|
dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
|
|
}
|
|
}
|
|
}
|