mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
209 lines
5.6 KiB
C
209 lines
5.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
|
|
*/
|
|
|
|
#ifndef __MXC_NAND_H
|
|
#define __MXC_NAND_H
|
|
|
|
/*
|
|
* Register map and bit definitions for the Freescale NAND Flash Controller
|
|
* present in various i.MX devices.
|
|
*
|
|
* MX31 and MX27 have version 1, which has:
|
|
* 4 512-byte main buffers and
|
|
* 4 16-byte spare buffers
|
|
* to support up to 2K byte pagesize nand.
|
|
* Reading or writing a 2K page requires 4 FDI/FDO cycles.
|
|
*
|
|
* MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
|
|
* have:
|
|
* 8 512-byte main buffers and
|
|
* 8 64-byte spare buffers
|
|
* to support up to 4K byte pagesize nand.
|
|
* Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
|
|
* Also some of registers are moved and/or changed meaning as seen below.
|
|
*/
|
|
#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
|
|
#define MXC_NFC_V1
|
|
#define is_mxc_nfc_1() 1
|
|
#define is_mxc_nfc_21() 0
|
|
#define is_mxc_nfc_32() 0
|
|
#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
|
|
#define MXC_NFC_V2_1
|
|
#define is_mxc_nfc_1() 0
|
|
#define is_mxc_nfc_21() 1
|
|
#define is_mxc_nfc_32() 0
|
|
#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
|
|
#define MXC_NFC_V3
|
|
#define MXC_NFC_V3_2
|
|
#define is_mxc_nfc_1() 0
|
|
#define is_mxc_nfc_21() 0
|
|
#define is_mxc_nfc_32() 1
|
|
#else
|
|
#error "MXC NFC implementation not supported"
|
|
#endif
|
|
#define is_mxc_nfc_3() is_mxc_nfc_32()
|
|
|
|
#if defined(MXC_NFC_V1)
|
|
#define NAND_MXC_NR_BUFS 4
|
|
#define NAND_MXC_SPARE_BUF_SIZE 16
|
|
#define NAND_MXC_REG_OFFSET 0xe00
|
|
#define NAND_MXC_2K_MULTI_CYCLE
|
|
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
|
|
#define NAND_MXC_NR_BUFS 8
|
|
#define NAND_MXC_SPARE_BUF_SIZE 64
|
|
#define NAND_MXC_REG_OFFSET 0x1e00
|
|
#endif
|
|
|
|
struct mxc_nand_regs {
|
|
u8 main_area[NAND_MXC_NR_BUFS][0x200];
|
|
u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
|
|
/*
|
|
* reserved size is offset of nfc registers
|
|
* minus total main and spare sizes
|
|
*/
|
|
u8 reserved1[NAND_MXC_REG_OFFSET
|
|
- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
|
|
#if defined(MXC_NFC_V1)
|
|
u16 buf_size;
|
|
u16 reserved2;
|
|
u16 buf_addr;
|
|
u16 flash_addr;
|
|
u16 flash_cmd;
|
|
u16 config;
|
|
u16 ecc_status_result;
|
|
u16 rsltmain_area;
|
|
u16 rsltspare_area;
|
|
u16 wrprot;
|
|
u16 unlockstart_blkaddr;
|
|
u16 unlockend_blkaddr;
|
|
u16 nf_wrprst;
|
|
u16 config1;
|
|
u16 config2;
|
|
#elif defined(MXC_NFC_V2_1)
|
|
u16 reserved2[2];
|
|
u16 buf_addr;
|
|
u16 flash_addr;
|
|
u16 flash_cmd;
|
|
u16 config;
|
|
u32 ecc_status_result;
|
|
u16 spare_area_size;
|
|
u16 wrprot;
|
|
u16 reserved3[2];
|
|
u16 nf_wrprst;
|
|
u16 config1;
|
|
u16 config2;
|
|
u16 reserved4;
|
|
u16 unlockstart_blkaddr;
|
|
u16 unlockend_blkaddr;
|
|
u16 unlockstart_blkaddr1;
|
|
u16 unlockend_blkaddr1;
|
|
u16 unlockstart_blkaddr2;
|
|
u16 unlockend_blkaddr2;
|
|
u16 unlockstart_blkaddr3;
|
|
u16 unlockend_blkaddr3;
|
|
#elif defined(MXC_NFC_V3_2)
|
|
u32 flash_cmd;
|
|
u32 flash_addr[12];
|
|
u32 config1;
|
|
u32 ecc_status_result;
|
|
u32 status_sum;
|
|
u32 launch;
|
|
#endif
|
|
};
|
|
|
|
#ifdef MXC_NFC_V3_2
|
|
struct mxc_nand_ip_regs {
|
|
u32 wrprot;
|
|
u32 wrprot_unlock_blkaddr[8];
|
|
u32 config2;
|
|
u32 config3;
|
|
u32 ipc;
|
|
u32 err_addr;
|
|
u32 delay_line;
|
|
};
|
|
#endif
|
|
|
|
/* Set FCMD to 1, rest to 0 for Command operation */
|
|
#define NFC_CMD 0x1
|
|
|
|
/* Set FADD to 1, rest to 0 for Address operation */
|
|
#define NFC_ADDR 0x2
|
|
|
|
/* Set FDI to 1, rest to 0 for Input operation */
|
|
#define NFC_INPUT 0x4
|
|
|
|
/* Set FDO to 001, rest to 0 for Data Output operation */
|
|
#define NFC_OUTPUT 0x8
|
|
|
|
/* Set FDO to 010, rest to 0 for Read ID operation */
|
|
#define NFC_ID 0x10
|
|
|
|
/* Set FDO to 100, rest to 0 for Read Status operation */
|
|
#define NFC_STATUS 0x20
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
#define NFC_CONFIG1_SP_EN (1 << 2)
|
|
#define NFC_CONFIG1_RST (1 << 6)
|
|
#define NFC_CONFIG1_CE (1 << 7)
|
|
#elif defined(MXC_NFC_V3_2)
|
|
#define NFC_CONFIG1_SP_EN (1 << 0)
|
|
#define NFC_CONFIG1_CE (1 << 1)
|
|
#define NFC_CONFIG1_RST (1 << 2)
|
|
#endif
|
|
#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
|
|
#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
|
|
#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
|
|
#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
|
|
#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
|
|
#define NFC_V2_CONFIG1_FP_INT (1 << 11)
|
|
#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4)
|
|
#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4)
|
|
|
|
#define NFC_V1_V2_CONFIG2_INT (1 << 15)
|
|
#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0)
|
|
#define NFC_V3_CONFIG2_PS_512 (0 << 0)
|
|
#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
|
|
#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
|
|
#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
|
|
#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
|
|
#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
|
|
#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5)
|
|
#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
|
|
#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7)
|
|
#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
|
|
#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9)
|
|
#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9)
|
|
#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12)
|
|
#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
|
|
#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16)
|
|
#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
|
|
#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24)
|
|
#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
|
|
|
|
#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
|
|
#define NFC_V3_CONFIG3_FW8 (1 << 3)
|
|
#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
|
|
#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12)
|
|
#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
|
|
#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
|
|
|
|
#define NFC_V3_WRPROT_UNLOCK (1 << 2)
|
|
#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
|
|
|
|
#define NFC_V3_IPC_CREQ (1 << 0)
|
|
#define NFC_V3_IPC_INT (1 << 31)
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
#define operation config2
|
|
#define readnfc readw
|
|
#define writenfc writew
|
|
#elif defined(MXC_NFC_V3_2)
|
|
#define operation launch
|
|
#define readnfc readl
|
|
#define writenfc writel
|
|
#endif
|
|
|
|
#endif /* __MXC_NAND_H */
|