mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1308 lines
33 KiB
C
1308 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2004-2007 Freescale Semiconductor, Inc.
|
|
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
|
|
* Copyright 2009 Ilya Yanok, <yanok@emcraft.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <linux/err.h>
|
|
#include <asm/io.h>
|
|
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \
|
|
defined(CONFIG_MX51) || defined(CONFIG_MX53)
|
|
#include <asm/arch/imx-regs.h>
|
|
#endif
|
|
#include "mxc_nand.h"
|
|
|
|
#define DRIVER_NAME "mxc_nand"
|
|
|
|
struct mxc_nand_host {
|
|
struct nand_chip *nand;
|
|
|
|
struct mxc_nand_regs __iomem *regs;
|
|
#ifdef MXC_NFC_V3_2
|
|
struct mxc_nand_ip_regs __iomem *ip_regs;
|
|
#endif
|
|
int spare_only;
|
|
int status_request;
|
|
int pagesize_2k;
|
|
int clk_act;
|
|
uint16_t col_addr;
|
|
unsigned int page_addr;
|
|
};
|
|
|
|
static struct mxc_nand_host mxc_host;
|
|
static struct mxc_nand_host *host = &mxc_host;
|
|
|
|
/* Define delays in microsec for NAND device operations */
|
|
#define TROP_US_DELAY 2000
|
|
/* Macros to get byte and bit positions of ECC */
|
|
#define COLPOS(x) ((x) >> 3)
|
|
#define BITPOS(x) ((x) & 0xf)
|
|
|
|
/* Define single bit Error positions in Main & Spare area */
|
|
#define MAIN_SINGLEBIT_ERROR 0x4
|
|
#define SPARE_SINGLEBIT_ERROR 0x1
|
|
|
|
/* OOB placement block for use with hardware ecc generation */
|
|
#if defined(MXC_NFC_V1)
|
|
#ifndef CONFIG_SYS_NAND_LARGEPAGE
|
|
static struct nand_ecclayout nand_hw_eccoob = {
|
|
.eccbytes = 5,
|
|
.eccpos = {6, 7, 8, 9, 10},
|
|
.oobfree = { {0, 5}, {11, 5}, }
|
|
};
|
|
#else
|
|
static struct nand_ecclayout nand_hw_eccoob2k = {
|
|
.eccbytes = 20,
|
|
.eccpos = {
|
|
6, 7, 8, 9, 10,
|
|
22, 23, 24, 25, 26,
|
|
38, 39, 40, 41, 42,
|
|
54, 55, 56, 57, 58,
|
|
},
|
|
.oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
|
|
};
|
|
#endif
|
|
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
|
|
#ifndef CONFIG_SYS_NAND_LARGEPAGE
|
|
static struct nand_ecclayout nand_hw_eccoob = {
|
|
.eccbytes = 9,
|
|
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
|
|
.oobfree = { {2, 5} }
|
|
};
|
|
#else
|
|
static struct nand_ecclayout nand_hw_eccoob2k = {
|
|
.eccbytes = 36,
|
|
.eccpos = {
|
|
7, 8, 9, 10, 11, 12, 13, 14, 15,
|
|
23, 24, 25, 26, 27, 28, 29, 30, 31,
|
|
39, 40, 41, 42, 43, 44, 45, 46, 47,
|
|
55, 56, 57, 58, 59, 60, 61, 62, 63,
|
|
},
|
|
.oobfree = { {2, 5}, {16, 7}, {32, 7}, {48, 7} },
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
static int is_16bit_nand(void)
|
|
{
|
|
#if defined(CONFIG_SYS_NAND_BUSWIDTH_16BIT)
|
|
return 1;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size)
|
|
{
|
|
uint32_t *d = dest;
|
|
|
|
size >>= 2;
|
|
while (size--)
|
|
__raw_writel(__raw_readl(source++), d++);
|
|
return dest;
|
|
}
|
|
|
|
/*
|
|
* This function polls the NANDFC to wait for the basic operation to
|
|
* complete by checking the INT bit.
|
|
*/
|
|
static void wait_op_done(struct mxc_nand_host *host, int max_retries,
|
|
uint16_t param)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
while (max_retries-- > 0) {
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
tmp = readnfc(&host->regs->config2);
|
|
if (tmp & NFC_V1_V2_CONFIG2_INT) {
|
|
tmp &= ~NFC_V1_V2_CONFIG2_INT;
|
|
writenfc(tmp, &host->regs->config2);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
tmp = readnfc(&host->ip_regs->ipc);
|
|
if (tmp & NFC_V3_IPC_INT) {
|
|
tmp &= ~NFC_V3_IPC_INT;
|
|
writenfc(tmp, &host->ip_regs->ipc);
|
|
#endif
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
if (max_retries < 0) {
|
|
pr_debug("%s(%d): INT not set\n",
|
|
__func__, param);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function issues the specified command to the NAND device and
|
|
* waits for completion.
|
|
*/
|
|
static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
|
|
{
|
|
pr_debug("send_cmd(host, 0x%x)\n", cmd);
|
|
|
|
writenfc(cmd, &host->regs->flash_cmd);
|
|
writenfc(NFC_CMD, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, cmd);
|
|
}
|
|
|
|
/*
|
|
* This function sends an address (or partial address) to the
|
|
* NAND device. The address is used to select the source/destination for
|
|
* a NAND command.
|
|
*/
|
|
static void send_addr(struct mxc_nand_host *host, uint16_t addr)
|
|
{
|
|
pr_debug("send_addr(host, 0x%x)\n", addr);
|
|
|
|
writenfc(addr, &host->regs->flash_addr);
|
|
writenfc(NFC_ADDR, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, addr);
|
|
}
|
|
|
|
/*
|
|
* This function requests the NANDFC to initiate the transfer
|
|
* of data currently in the NANDFC RAM buffer to the NAND device.
|
|
*/
|
|
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
|
|
int spare_only)
|
|
{
|
|
if (spare_only)
|
|
pr_debug("send_prog_page (%d)\n", spare_only);
|
|
|
|
if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
|
|
int i;
|
|
/*
|
|
* The controller copies the 64 bytes of spare data from
|
|
* the first 16 bytes of each of the 4 64 byte spare buffers.
|
|
* Copy the contiguous data starting in spare_area[0] to
|
|
* the four spare area buffers.
|
|
*/
|
|
for (i = 1; i < 4; i++) {
|
|
void __iomem *src = &host->regs->spare_area[0][i * 16];
|
|
void __iomem *dst = &host->regs->spare_area[i][0];
|
|
|
|
mxc_nand_memcpy32(dst, src, 16);
|
|
}
|
|
}
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
writenfc(buf_id, &host->regs->buf_addr);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
uint32_t tmp = readnfc(&host->regs->config1);
|
|
tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
|
|
tmp |= NFC_V3_CONFIG1_RBA(buf_id);
|
|
writenfc(tmp, &host->regs->config1);
|
|
#endif
|
|
|
|
/* Configure spare or page+spare access */
|
|
if (!host->pagesize_2k) {
|
|
uint32_t config1 = readnfc(&host->regs->config1);
|
|
if (spare_only)
|
|
config1 |= NFC_CONFIG1_SP_EN;
|
|
else
|
|
config1 &= ~NFC_CONFIG1_SP_EN;
|
|
writenfc(config1, &host->regs->config1);
|
|
}
|
|
|
|
writenfc(NFC_INPUT, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, spare_only);
|
|
}
|
|
|
|
/*
|
|
* Requests NANDFC to initiate the transfer of data from the
|
|
* NAND device into in the NANDFC ram buffer.
|
|
*/
|
|
static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
|
|
int spare_only)
|
|
{
|
|
pr_debug("send_read_page (%d)\n", spare_only);
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
writenfc(buf_id, &host->regs->buf_addr);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
uint32_t tmp = readnfc(&host->regs->config1);
|
|
tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
|
|
tmp |= NFC_V3_CONFIG1_RBA(buf_id);
|
|
writenfc(tmp, &host->regs->config1);
|
|
#endif
|
|
|
|
/* Configure spare or page+spare access */
|
|
if (!host->pagesize_2k) {
|
|
uint32_t config1 = readnfc(&host->regs->config1);
|
|
if (spare_only)
|
|
config1 |= NFC_CONFIG1_SP_EN;
|
|
else
|
|
config1 &= ~NFC_CONFIG1_SP_EN;
|
|
writenfc(config1, &host->regs->config1);
|
|
}
|
|
|
|
writenfc(NFC_OUTPUT, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, spare_only);
|
|
|
|
if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
|
|
int i;
|
|
|
|
/*
|
|
* The controller copies the 64 bytes of spare data to
|
|
* the first 16 bytes of each of the 4 spare buffers.
|
|
* Make the data contiguous starting in spare_area[0].
|
|
*/
|
|
for (i = 1; i < 4; i++) {
|
|
void __iomem *src = &host->regs->spare_area[i][0];
|
|
void __iomem *dst = &host->regs->spare_area[0][i * 16];
|
|
|
|
mxc_nand_memcpy32(dst, src, 16);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Request the NANDFC to perform a read of the NAND device ID. */
|
|
static void send_read_id(struct mxc_nand_host *host)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
/* NANDFC buffer 0 is used for device ID output */
|
|
writenfc(0x0, &host->regs->buf_addr);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
tmp = readnfc(&host->regs->config1);
|
|
tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
|
|
writenfc(tmp, &host->regs->config1);
|
|
#endif
|
|
|
|
/* Read ID into main buffer */
|
|
tmp = readnfc(&host->regs->config1);
|
|
tmp &= ~NFC_CONFIG1_SP_EN;
|
|
writenfc(tmp, &host->regs->config1);
|
|
|
|
writenfc(NFC_ID, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, 0);
|
|
}
|
|
|
|
/*
|
|
* This function requests the NANDFC to perform a read of the
|
|
* NAND device status and returns the current status.
|
|
*/
|
|
static uint16_t get_dev_status(struct mxc_nand_host *host)
|
|
{
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
void __iomem *main_buf = host->regs->main_area[1];
|
|
uint32_t store;
|
|
#endif
|
|
uint32_t ret, tmp;
|
|
/* Issue status request to NAND device */
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
/* store the main area1 first word, later do recovery */
|
|
store = readl(main_buf);
|
|
/* NANDFC buffer 1 is used for device status */
|
|
writenfc(1, &host->regs->buf_addr);
|
|
#endif
|
|
|
|
/* Read status into main buffer */
|
|
tmp = readnfc(&host->regs->config1);
|
|
tmp &= ~NFC_CONFIG1_SP_EN;
|
|
writenfc(tmp, &host->regs->config1);
|
|
|
|
writenfc(NFC_STATUS, &host->regs->operation);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, TROP_US_DELAY, 0);
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
/*
|
|
* Status is placed in first word of main buffer
|
|
* get status, then recovery area 1 data
|
|
*/
|
|
ret = readw(main_buf);
|
|
writel(store, main_buf);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
ret = readnfc(&host->regs->config1) >> 16;
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* This function is used by upper layer to checks if device is ready */
|
|
static int mxc_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
/*
|
|
* NFC handles R/B internally. Therefore, this function
|
|
* always returns status as ready.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
uint16_t tmp = readnfc(&host->regs->config1);
|
|
|
|
if (on)
|
|
tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
|
|
else
|
|
tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
|
|
writenfc(tmp, &host->regs->config1);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
uint32_t tmp = readnfc(&host->ip_regs->config2);
|
|
|
|
if (on)
|
|
tmp |= NFC_V3_CONFIG2_ECC_EN;
|
|
else
|
|
tmp &= ~NFC_V3_CONFIG2_ECC_EN;
|
|
writenfc(tmp, &host->ip_regs->config2);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_NAND_HWECC
|
|
static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
/*
|
|
* If HW ECC is enabled, we turn it on during init. There is
|
|
* no need to enable again here.
|
|
*/
|
|
}
|
|
|
|
#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
|
|
static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip,
|
|
int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
uint8_t *buf = chip->oob_poi;
|
|
int length = mtd->oobsize;
|
|
int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
uint8_t *bufpoi = buf;
|
|
int i, toread;
|
|
|
|
pr_debug("%s: Reading OOB area of page %u to oob %p\n",
|
|
__func__, page, buf);
|
|
|
|
chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
|
|
for (i = 0; i < chip->ecc.steps; i++) {
|
|
toread = min_t(int, length, chip->ecc.prepad);
|
|
if (toread) {
|
|
chip->read_buf(mtd, bufpoi, toread);
|
|
bufpoi += toread;
|
|
length -= toread;
|
|
}
|
|
bufpoi += chip->ecc.bytes;
|
|
host->col_addr += chip->ecc.bytes;
|
|
length -= chip->ecc.bytes;
|
|
|
|
toread = min_t(int, length, chip->ecc.postpad);
|
|
if (toread) {
|
|
chip->read_buf(mtd, bufpoi, toread);
|
|
bufpoi += toread;
|
|
length -= toread;
|
|
}
|
|
}
|
|
if (length > 0)
|
|
chip->read_buf(mtd, bufpoi, length);
|
|
|
|
_mxc_nand_enable_hwecc(mtd, 0);
|
|
chip->cmdfunc(mtd, NAND_CMD_READOOB,
|
|
mtd->writesize + chip->ecc.prepad, page);
|
|
bufpoi = buf + chip->ecc.prepad;
|
|
length = mtd->oobsize - chip->ecc.prepad;
|
|
for (i = 0; i < chip->ecc.steps; i++) {
|
|
toread = min_t(int, length, chip->ecc.bytes);
|
|
chip->read_buf(mtd, bufpoi, toread);
|
|
bufpoi += eccpitch;
|
|
length -= eccpitch;
|
|
host->col_addr += chip->ecc.postpad + chip->ecc.prepad;
|
|
}
|
|
_mxc_nand_enable_hwecc(mtd, 1);
|
|
return 1;
|
|
}
|
|
|
|
static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip,
|
|
uint8_t *buf,
|
|
int oob_required,
|
|
int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
int eccsize = chip->ecc.size;
|
|
int eccbytes = chip->ecc.bytes;
|
|
int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
uint8_t *oob = chip->oob_poi;
|
|
int steps, size;
|
|
int n;
|
|
|
|
_mxc_nand_enable_hwecc(mtd, 0);
|
|
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
|
|
|
|
for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
|
|
host->col_addr = n * eccsize;
|
|
chip->read_buf(mtd, buf, eccsize);
|
|
buf += eccsize;
|
|
|
|
host->col_addr = mtd->writesize + n * eccpitch;
|
|
if (chip->ecc.prepad) {
|
|
chip->read_buf(mtd, oob, chip->ecc.prepad);
|
|
oob += chip->ecc.prepad;
|
|
}
|
|
|
|
chip->read_buf(mtd, oob, eccbytes);
|
|
oob += eccbytes;
|
|
|
|
if (chip->ecc.postpad) {
|
|
chip->read_buf(mtd, oob, chip->ecc.postpad);
|
|
oob += chip->ecc.postpad;
|
|
}
|
|
}
|
|
|
|
size = mtd->oobsize - (oob - chip->oob_poi);
|
|
if (size)
|
|
chip->read_buf(mtd, oob, size);
|
|
_mxc_nand_enable_hwecc(mtd, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip,
|
|
uint8_t *buf,
|
|
int oob_required,
|
|
int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
int n, eccsize = chip->ecc.size;
|
|
int eccbytes = chip->ecc.bytes;
|
|
int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
int eccsteps = chip->ecc.steps;
|
|
uint8_t *p = buf;
|
|
uint8_t *oob = chip->oob_poi;
|
|
|
|
pr_debug("Reading page %u to buf %p oob %p\n",
|
|
page, buf, oob);
|
|
|
|
/* first read the data area and the available portion of OOB */
|
|
for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
|
|
int stat;
|
|
|
|
host->col_addr = n * eccsize;
|
|
|
|
chip->read_buf(mtd, p, eccsize);
|
|
|
|
host->col_addr = mtd->writesize + n * eccpitch;
|
|
|
|
if (chip->ecc.prepad) {
|
|
chip->read_buf(mtd, oob, chip->ecc.prepad);
|
|
oob += chip->ecc.prepad;
|
|
}
|
|
|
|
stat = chip->ecc.correct(mtd, p, oob, NULL);
|
|
|
|
if (stat < 0)
|
|
mtd->ecc_stats.failed++;
|
|
else
|
|
mtd->ecc_stats.corrected += stat;
|
|
oob += eccbytes;
|
|
|
|
if (chip->ecc.postpad) {
|
|
chip->read_buf(mtd, oob, chip->ecc.postpad);
|
|
oob += chip->ecc.postpad;
|
|
}
|
|
}
|
|
|
|
/* Calculate remaining oob bytes */
|
|
n = mtd->oobsize - (oob - chip->oob_poi);
|
|
if (n)
|
|
chip->read_buf(mtd, oob, n);
|
|
|
|
/* Then switch ECC off and read the OOB area to get the ECC code */
|
|
_mxc_nand_enable_hwecc(mtd, 0);
|
|
chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
|
|
eccsteps = chip->ecc.steps;
|
|
oob = chip->oob_poi + chip->ecc.prepad;
|
|
for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
|
|
host->col_addr = mtd->writesize +
|
|
n * eccpitch +
|
|
chip->ecc.prepad;
|
|
chip->read_buf(mtd, oob, eccbytes);
|
|
oob += eccbytes + chip->ecc.postpad;
|
|
}
|
|
_mxc_nand_enable_hwecc(mtd, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_nand_write_oob_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip, int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
int length = mtd->oobsize;
|
|
int i, len, status, steps = chip->ecc.steps;
|
|
const uint8_t *bufpoi = chip->oob_poi;
|
|
|
|
chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
|
|
for (i = 0; i < steps; i++) {
|
|
len = min_t(int, length, eccpitch);
|
|
|
|
chip->write_buf(mtd, bufpoi, len);
|
|
bufpoi += len;
|
|
length -= len;
|
|
host->col_addr += chip->ecc.prepad + chip->ecc.postpad;
|
|
}
|
|
if (length > 0)
|
|
chip->write_buf(mtd, bufpoi, length);
|
|
|
|
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
|
|
status = chip->waitfunc(mtd, chip);
|
|
return status & NAND_STATUS_FAIL ? -EIO : 0;
|
|
}
|
|
|
|
static int mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip,
|
|
const uint8_t *buf,
|
|
int oob_required, int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
int eccsize = chip->ecc.size;
|
|
int eccbytes = chip->ecc.bytes;
|
|
int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
uint8_t *oob = chip->oob_poi;
|
|
int steps, size;
|
|
int n;
|
|
|
|
for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
|
|
host->col_addr = n * eccsize;
|
|
chip->write_buf(mtd, buf, eccsize);
|
|
buf += eccsize;
|
|
|
|
host->col_addr = mtd->writesize + n * eccpitch;
|
|
|
|
if (chip->ecc.prepad) {
|
|
chip->write_buf(mtd, oob, chip->ecc.prepad);
|
|
oob += chip->ecc.prepad;
|
|
}
|
|
|
|
host->col_addr += eccbytes;
|
|
oob += eccbytes;
|
|
|
|
if (chip->ecc.postpad) {
|
|
chip->write_buf(mtd, oob, chip->ecc.postpad);
|
|
oob += chip->ecc.postpad;
|
|
}
|
|
}
|
|
|
|
size = mtd->oobsize - (oob - chip->oob_poi);
|
|
if (size)
|
|
chip->write_buf(mtd, oob, size);
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_nand_write_page_syndrome(struct mtd_info *mtd,
|
|
struct nand_chip *chip,
|
|
const uint8_t *buf,
|
|
int oob_required, int page)
|
|
{
|
|
struct mxc_nand_host *host = nand_get_controller_data(chip);
|
|
int i, n, eccsize = chip->ecc.size;
|
|
int eccbytes = chip->ecc.bytes;
|
|
int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
int eccsteps = chip->ecc.steps;
|
|
const uint8_t *p = buf;
|
|
uint8_t *oob = chip->oob_poi;
|
|
|
|
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
|
|
|
|
for (i = n = 0;
|
|
eccsteps;
|
|
n++, eccsteps--, i += eccbytes, p += eccsize) {
|
|
host->col_addr = n * eccsize;
|
|
|
|
chip->write_buf(mtd, p, eccsize);
|
|
|
|
host->col_addr = mtd->writesize + n * eccpitch;
|
|
|
|
if (chip->ecc.prepad) {
|
|
chip->write_buf(mtd, oob, chip->ecc.prepad);
|
|
oob += chip->ecc.prepad;
|
|
}
|
|
|
|
chip->write_buf(mtd, oob, eccbytes);
|
|
oob += eccbytes;
|
|
|
|
if (chip->ecc.postpad) {
|
|
chip->write_buf(mtd, oob, chip->ecc.postpad);
|
|
oob += chip->ecc.postpad;
|
|
}
|
|
}
|
|
|
|
/* Calculate remaining oob bytes */
|
|
i = mtd->oobsize - (oob - chip->oob_poi);
|
|
if (i)
|
|
chip->write_buf(mtd, oob, i);
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
uint32_t ecc_status = readl(&host->regs->ecc_status_result);
|
|
int subpages = mtd->writesize / nand_chip->subpagesize;
|
|
int pg2blk_shift = nand_chip->phys_erase_shift -
|
|
nand_chip->page_shift;
|
|
|
|
do {
|
|
if ((ecc_status & 0xf) > 4) {
|
|
static int last_bad = -1;
|
|
|
|
if (last_bad != host->page_addr >> pg2blk_shift) {
|
|
last_bad = host->page_addr >> pg2blk_shift;
|
|
printk(KERN_DEBUG
|
|
"MXC_NAND: HWECC uncorrectable ECC error"
|
|
" in block %u page %u subpage %d\n",
|
|
last_bad, host->page_addr,
|
|
mtd->writesize / nand_chip->subpagesize
|
|
- subpages);
|
|
}
|
|
return -EBADMSG;
|
|
}
|
|
ecc_status >>= 4;
|
|
subpages--;
|
|
} while (subpages > 0);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define mxc_nand_read_page_syndrome NULL
|
|
#define mxc_nand_read_page_raw_syndrome NULL
|
|
#define mxc_nand_read_oob_syndrome NULL
|
|
#define mxc_nand_write_page_syndrome NULL
|
|
#define mxc_nand_write_page_raw_syndrome NULL
|
|
#define mxc_nand_write_oob_syndrome NULL
|
|
|
|
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
|
|
/*
|
|
* 1-Bit errors are automatically corrected in HW. No need for
|
|
* additional correction. 2-Bit errors cannot be corrected by
|
|
* HW ECC, so we need to return failure
|
|
*/
|
|
uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
|
|
|
|
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
|
|
pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
|
|
return -EBADMSG;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
|
|
u_char *ecc_code)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static u_char mxc_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
uint8_t ret = 0;
|
|
uint16_t col;
|
|
uint16_t __iomem *main_buf =
|
|
(uint16_t __iomem *)host->regs->main_area[0];
|
|
uint16_t __iomem *spare_buf =
|
|
(uint16_t __iomem *)host->regs->spare_area[0];
|
|
union {
|
|
uint16_t word;
|
|
uint8_t bytes[2];
|
|
} nfc_word;
|
|
|
|
/* Check for status request */
|
|
if (host->status_request)
|
|
return get_dev_status(host) & 0xFF;
|
|
|
|
/* Get column for 16-bit access */
|
|
col = host->col_addr >> 1;
|
|
|
|
/* If we are accessing the spare region */
|
|
if (host->spare_only)
|
|
nfc_word.word = readw(&spare_buf[col]);
|
|
else
|
|
nfc_word.word = readw(&main_buf[col]);
|
|
|
|
/* Pick upper/lower byte of word from RAM buffer */
|
|
ret = nfc_word.bytes[host->col_addr & 0x1];
|
|
|
|
/* Update saved column address */
|
|
if (nand_chip->options & NAND_BUSWIDTH_16)
|
|
host->col_addr += 2;
|
|
else
|
|
host->col_addr++;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
uint16_t col, ret;
|
|
uint16_t __iomem *p;
|
|
|
|
pr_debug("mxc_nand_read_word(col = %d)\n", host->col_addr);
|
|
|
|
col = host->col_addr;
|
|
/* Adjust saved column address */
|
|
if (col < mtd->writesize && host->spare_only)
|
|
col += mtd->writesize;
|
|
|
|
if (col < mtd->writesize) {
|
|
p = (uint16_t __iomem *)(host->regs->main_area[0] +
|
|
(col >> 1));
|
|
} else {
|
|
p = (uint16_t __iomem *)(host->regs->spare_area[0] +
|
|
((col - mtd->writesize) >> 1));
|
|
}
|
|
|
|
if (col & 1) {
|
|
union {
|
|
uint16_t word;
|
|
uint8_t bytes[2];
|
|
} nfc_word[3];
|
|
|
|
nfc_word[0].word = readw(p);
|
|
nfc_word[1].word = readw(p + 1);
|
|
|
|
nfc_word[2].bytes[0] = nfc_word[0].bytes[1];
|
|
nfc_word[2].bytes[1] = nfc_word[1].bytes[0];
|
|
|
|
ret = nfc_word[2].word;
|
|
} else {
|
|
ret = readw(p);
|
|
}
|
|
|
|
/* Update saved column address */
|
|
host->col_addr = col + 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Write data of length len to buffer buf. The data to be
|
|
* written on NAND Flash is first copied to RAMbuffer. After the Data Input
|
|
* Operation by the NFC, the data is written to NAND Flash
|
|
*/
|
|
static void mxc_nand_write_buf(struct mtd_info *mtd,
|
|
const u_char *buf, int len)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
int n, col, i = 0;
|
|
|
|
pr_debug("mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
|
|
len);
|
|
|
|
col = host->col_addr;
|
|
|
|
/* Adjust saved column address */
|
|
if (col < mtd->writesize && host->spare_only)
|
|
col += mtd->writesize;
|
|
|
|
n = mtd->writesize + mtd->oobsize - col;
|
|
n = min(len, n);
|
|
|
|
pr_debug("%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
|
|
|
|
while (n > 0) {
|
|
void __iomem *p;
|
|
|
|
if (col < mtd->writesize) {
|
|
p = host->regs->main_area[0] + (col & ~3);
|
|
} else {
|
|
p = host->regs->spare_area[0] -
|
|
mtd->writesize + (col & ~3);
|
|
}
|
|
|
|
pr_debug("%s:%d: p = %p\n", __func__,
|
|
__LINE__, p);
|
|
|
|
if (((col | (unsigned long)&buf[i]) & 3) || n < 4) {
|
|
union {
|
|
uint32_t word;
|
|
uint8_t bytes[4];
|
|
} nfc_word;
|
|
|
|
nfc_word.word = readl(p);
|
|
nfc_word.bytes[col & 3] = buf[i++];
|
|
n--;
|
|
col++;
|
|
|
|
writel(nfc_word.word, p);
|
|
} else {
|
|
int m = mtd->writesize - col;
|
|
|
|
if (col >= mtd->writesize)
|
|
m += mtd->oobsize;
|
|
|
|
m = min(n, m) & ~3;
|
|
|
|
pr_debug("%s:%d: n = %d, m = %d, i = %d, col = %d\n",
|
|
__func__, __LINE__, n, m, i, col);
|
|
|
|
mxc_nand_memcpy32(p, (uint32_t *)&buf[i], m);
|
|
col += m;
|
|
i += m;
|
|
n -= m;
|
|
}
|
|
}
|
|
/* Update saved column address */
|
|
host->col_addr = col;
|
|
}
|
|
|
|
/*
|
|
* Read the data buffer from the NAND Flash. To read the data from NAND
|
|
* Flash first the data output cycle is initiated by the NFC, which copies
|
|
* the data to RAMbuffer. This data of length len is then copied to buffer buf.
|
|
*/
|
|
static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
int n, col, i = 0;
|
|
|
|
pr_debug("mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr,
|
|
len);
|
|
|
|
col = host->col_addr;
|
|
|
|
/* Adjust saved column address */
|
|
if (col < mtd->writesize && host->spare_only)
|
|
col += mtd->writesize;
|
|
|
|
n = mtd->writesize + mtd->oobsize - col;
|
|
n = min(len, n);
|
|
|
|
while (n > 0) {
|
|
void __iomem *p;
|
|
|
|
if (col < mtd->writesize) {
|
|
p = host->regs->main_area[0] + (col & ~3);
|
|
} else {
|
|
p = host->regs->spare_area[0] -
|
|
mtd->writesize + (col & ~3);
|
|
}
|
|
|
|
if (((col | (int)&buf[i]) & 3) || n < 4) {
|
|
union {
|
|
uint32_t word;
|
|
uint8_t bytes[4];
|
|
} nfc_word;
|
|
|
|
nfc_word.word = readl(p);
|
|
buf[i++] = nfc_word.bytes[col & 3];
|
|
n--;
|
|
col++;
|
|
} else {
|
|
int m = mtd->writesize - col;
|
|
|
|
if (col >= mtd->writesize)
|
|
m += mtd->oobsize;
|
|
|
|
m = min(n, m) & ~3;
|
|
mxc_nand_memcpy32((uint32_t *)&buf[i], p, m);
|
|
|
|
col += m;
|
|
i += m;
|
|
n -= m;
|
|
}
|
|
}
|
|
/* Update saved column address */
|
|
host->col_addr = col;
|
|
}
|
|
|
|
/*
|
|
* This function is used by upper layer for select and
|
|
* deselect of the NAND chip
|
|
*/
|
|
static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
|
|
switch (chip) {
|
|
case -1:
|
|
/* TODO: Disable the NFC clock */
|
|
if (host->clk_act)
|
|
host->clk_act = 0;
|
|
break;
|
|
case 0:
|
|
/* TODO: Enable the NFC clock */
|
|
if (!host->clk_act)
|
|
host->clk_act = 1;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Used by the upper layer to write command to NAND Flash for
|
|
* different operations to be carried out on NAND Flash
|
|
*/
|
|
void mxc_nand_command(struct mtd_info *mtd, unsigned command,
|
|
int column, int page_addr)
|
|
{
|
|
struct nand_chip *nand_chip = mtd_to_nand(mtd);
|
|
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
|
|
|
|
pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
|
|
command, column, page_addr);
|
|
|
|
/* Reset command state information */
|
|
host->status_request = false;
|
|
|
|
/* Command pre-processing step */
|
|
switch (command) {
|
|
|
|
case NAND_CMD_STATUS:
|
|
host->col_addr = 0;
|
|
host->status_request = true;
|
|
break;
|
|
|
|
case NAND_CMD_READ0:
|
|
host->page_addr = page_addr;
|
|
host->col_addr = column;
|
|
host->spare_only = false;
|
|
break;
|
|
|
|
case NAND_CMD_READOOB:
|
|
host->col_addr = column;
|
|
host->spare_only = true;
|
|
if (host->pagesize_2k)
|
|
command = NAND_CMD_READ0; /* only READ0 is valid */
|
|
break;
|
|
|
|
case NAND_CMD_SEQIN:
|
|
if (column >= mtd->writesize) {
|
|
/*
|
|
* before sending SEQIN command for partial write,
|
|
* we need read one page out. FSL NFC does not support
|
|
* partial write. It always sends out 512+ecc+512+ecc
|
|
* for large page nand flash. But for small page nand
|
|
* flash, it does support SPARE ONLY operation.
|
|
*/
|
|
if (host->pagesize_2k) {
|
|
/* call ourself to read a page */
|
|
mxc_nand_command(mtd, NAND_CMD_READ0, 0,
|
|
page_addr);
|
|
}
|
|
|
|
host->col_addr = column - mtd->writesize;
|
|
host->spare_only = true;
|
|
|
|
/* Set program pointer to spare region */
|
|
if (!host->pagesize_2k)
|
|
send_cmd(host, NAND_CMD_READOOB);
|
|
} else {
|
|
host->spare_only = false;
|
|
host->col_addr = column;
|
|
|
|
/* Set program pointer to page start */
|
|
if (!host->pagesize_2k)
|
|
send_cmd(host, NAND_CMD_READ0);
|
|
}
|
|
break;
|
|
|
|
case NAND_CMD_PAGEPROG:
|
|
send_prog_page(host, 0, host->spare_only);
|
|
|
|
if (host->pagesize_2k && is_mxc_nfc_1()) {
|
|
/* data in 4 areas */
|
|
send_prog_page(host, 1, host->spare_only);
|
|
send_prog_page(host, 2, host->spare_only);
|
|
send_prog_page(host, 3, host->spare_only);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
/* Write out the command to the device. */
|
|
send_cmd(host, command);
|
|
|
|
/* Write out column address, if necessary */
|
|
if (column != -1) {
|
|
/*
|
|
* MXC NANDFC can only perform full page+spare or
|
|
* spare-only read/write. When the upper layers perform
|
|
* a read/write buffer operation, we will use the saved
|
|
* column address to index into the full page.
|
|
*/
|
|
send_addr(host, 0);
|
|
if (host->pagesize_2k)
|
|
/* another col addr cycle for 2k page */
|
|
send_addr(host, 0);
|
|
}
|
|
|
|
/* Write out page address, if necessary */
|
|
if (page_addr != -1) {
|
|
u32 page_mask = nand_chip->pagemask;
|
|
do {
|
|
send_addr(host, page_addr & 0xFF);
|
|
page_addr >>= 8;
|
|
page_mask >>= 8;
|
|
} while (page_mask);
|
|
}
|
|
|
|
/* Command post-processing step */
|
|
switch (command) {
|
|
|
|
case NAND_CMD_RESET:
|
|
break;
|
|
|
|
case NAND_CMD_READOOB:
|
|
case NAND_CMD_READ0:
|
|
if (host->pagesize_2k) {
|
|
/* send read confirm command */
|
|
send_cmd(host, NAND_CMD_READSTART);
|
|
/* read for each AREA */
|
|
send_read_page(host, 0, host->spare_only);
|
|
if (is_mxc_nfc_1()) {
|
|
send_read_page(host, 1, host->spare_only);
|
|
send_read_page(host, 2, host->spare_only);
|
|
send_read_page(host, 3, host->spare_only);
|
|
}
|
|
} else {
|
|
send_read_page(host, 0, host->spare_only);
|
|
}
|
|
break;
|
|
|
|
case NAND_CMD_READID:
|
|
host->col_addr = 0;
|
|
send_read_id(host);
|
|
break;
|
|
|
|
case NAND_CMD_PAGEPROG:
|
|
break;
|
|
|
|
case NAND_CMD_STATUS:
|
|
break;
|
|
|
|
case NAND_CMD_ERASE2:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
|
|
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
|
|
static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
|
|
|
|
static struct nand_bbt_descr bbt_main_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
|
|
NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 0,
|
|
.len = 4,
|
|
.veroffs = 4,
|
|
.maxblocks = 4,
|
|
.pattern = bbt_pattern,
|
|
};
|
|
|
|
static struct nand_bbt_descr bbt_mirror_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
|
|
NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 0,
|
|
.len = 4,
|
|
.veroffs = 4,
|
|
.maxblocks = 4,
|
|
.pattern = mirror_pattern,
|
|
};
|
|
|
|
#endif
|
|
|
|
int board_nand_init(struct nand_chip *this)
|
|
{
|
|
struct mtd_info *mtd;
|
|
#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
|
|
uint32_t tmp;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
this->bbt_options |= NAND_BBT_USE_FLASH;
|
|
this->bbt_td = &bbt_main_descr;
|
|
this->bbt_md = &bbt_mirror_descr;
|
|
#endif
|
|
|
|
/* structures must be linked */
|
|
mtd = &this->mtd;
|
|
host->nand = this;
|
|
|
|
/* 5 us command delay time */
|
|
this->chip_delay = 5;
|
|
|
|
nand_set_controller_data(this, host);
|
|
this->dev_ready = mxc_nand_dev_ready;
|
|
this->cmdfunc = mxc_nand_command;
|
|
this->select_chip = mxc_nand_select_chip;
|
|
this->read_byte = mxc_nand_read_byte;
|
|
this->read_word = mxc_nand_read_word;
|
|
this->write_buf = mxc_nand_write_buf;
|
|
this->read_buf = mxc_nand_read_buf;
|
|
|
|
host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
|
|
#ifdef MXC_NFC_V3_2
|
|
host->ip_regs =
|
|
(struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
|
|
#endif
|
|
host->clk_act = 1;
|
|
|
|
#ifdef CONFIG_MXC_NAND_HWECC
|
|
this->ecc.calculate = mxc_nand_calculate_ecc;
|
|
this->ecc.hwctl = mxc_nand_enable_hwecc;
|
|
this->ecc.correct = mxc_nand_correct_data;
|
|
if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
|
|
this->ecc.mode = NAND_ECC_HW_SYNDROME;
|
|
this->ecc.read_page = mxc_nand_read_page_syndrome;
|
|
this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
|
|
this->ecc.read_oob = mxc_nand_read_oob_syndrome;
|
|
this->ecc.write_page = mxc_nand_write_page_syndrome;
|
|
this->ecc.write_page_raw = mxc_nand_write_page_raw_syndrome;
|
|
this->ecc.write_oob = mxc_nand_write_oob_syndrome;
|
|
this->ecc.bytes = 9;
|
|
this->ecc.prepad = 7;
|
|
} else {
|
|
this->ecc.mode = NAND_ECC_HW;
|
|
}
|
|
|
|
if (is_mxc_nfc_1())
|
|
this->ecc.strength = 1;
|
|
else
|
|
this->ecc.strength = 4;
|
|
|
|
host->pagesize_2k = 0;
|
|
|
|
this->ecc.size = 512;
|
|
_mxc_nand_enable_hwecc(mtd, 1);
|
|
#else
|
|
this->ecc.layout = &nand_soft_eccoob;
|
|
this->ecc.mode = NAND_ECC_SOFT;
|
|
_mxc_nand_enable_hwecc(mtd, 0);
|
|
#endif
|
|
/* Reset NAND */
|
|
this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
|
|
|
|
/* NAND bus width determines access functions used by upper layer */
|
|
if (is_16bit_nand())
|
|
this->options |= NAND_BUSWIDTH_16;
|
|
|
|
#ifdef CONFIG_SYS_NAND_LARGEPAGE
|
|
host->pagesize_2k = 1;
|
|
this->ecc.layout = &nand_hw_eccoob2k;
|
|
#else
|
|
host->pagesize_2k = 0;
|
|
this->ecc.layout = &nand_hw_eccoob;
|
|
#endif
|
|
|
|
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
|
|
#ifdef MXC_NFC_V2_1
|
|
tmp = readnfc(&host->regs->config1);
|
|
tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
|
|
tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
|
|
writenfc(tmp, &host->regs->config1);
|
|
if (host->pagesize_2k)
|
|
writenfc(64/2, &host->regs->spare_area_size);
|
|
else
|
|
writenfc(16/2, &host->regs->spare_area_size);
|
|
#endif
|
|
|
|
/*
|
|
* preset operation
|
|
* Unlock the internal RAM Buffer
|
|
*/
|
|
writenfc(0x2, &host->regs->config);
|
|
|
|
/* Blocks to be unlocked */
|
|
writenfc(0x0, &host->regs->unlockstart_blkaddr);
|
|
/* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
|
|
* unlockend_blkaddr, but the magic 0x4000 does not always work
|
|
* when writing more than some 32 megabytes (on 2k page nands)
|
|
* However 0xFFFF doesn't seem to have this kind
|
|
* of limitation (tried it back and forth several times).
|
|
* The linux kernel driver sets this to 0xFFFF for the v2 controller
|
|
* only, but probably this was not tested there for v1.
|
|
* The very same limitation seems to apply to this kernel driver.
|
|
* This might be NAND chip specific and the i.MX31 datasheet is
|
|
* extremely vague about the semantics of this register.
|
|
*/
|
|
writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
|
|
|
|
/* Unlock Block Command for given address range */
|
|
writenfc(0x4, &host->regs->wrprot);
|
|
#elif defined(MXC_NFC_V3_2)
|
|
writenfc(NFC_V3_CONFIG1_RBA(0), &host->regs->config1);
|
|
writenfc(NFC_V3_IPC_CREQ, &host->ip_regs->ipc);
|
|
|
|
/* Unlock the internal RAM Buffer */
|
|
writenfc(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
|
|
&host->ip_regs->wrprot);
|
|
|
|
/* Blocks to be unlocked */
|
|
for (tmp = 0; tmp < CONFIG_SYS_NAND_MAX_CHIPS; tmp++)
|
|
writenfc(0x0 | 0xFFFF << 16,
|
|
&host->ip_regs->wrprot_unlock_blkaddr[tmp]);
|
|
|
|
writenfc(0, &host->ip_regs->ipc);
|
|
|
|
tmp = readnfc(&host->ip_regs->config2);
|
|
tmp &= ~(NFC_V3_CONFIG2_SPAS_MASK | NFC_V3_CONFIG2_EDC_MASK |
|
|
NFC_V3_CONFIG2_ECC_MODE_8 | NFC_V3_CONFIG2_PS_MASK);
|
|
tmp |= NFC_V3_CONFIG2_ONE_CYCLE;
|
|
|
|
if (host->pagesize_2k) {
|
|
tmp |= NFC_V3_CONFIG2_SPAS(64/2);
|
|
tmp |= NFC_V3_CONFIG2_PS_2048;
|
|
} else {
|
|
tmp |= NFC_V3_CONFIG2_SPAS(16/2);
|
|
tmp |= NFC_V3_CONFIG2_PS_512;
|
|
}
|
|
|
|
writenfc(tmp, &host->ip_regs->config2);
|
|
|
|
tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
|
|
NFC_V3_CONFIG3_NO_SDMA |
|
|
NFC_V3_CONFIG3_RBB_MODE |
|
|
NFC_V3_CONFIG3_SBB(6) | /* Reset default */
|
|
NFC_V3_CONFIG3_ADD_OP(0);
|
|
|
|
if (!(this->options & NAND_BUSWIDTH_16))
|
|
tmp |= NFC_V3_CONFIG3_FW8;
|
|
|
|
writenfc(tmp, &host->ip_regs->config3);
|
|
|
|
writenfc(0, &host->ip_regs->delay_line);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|