u-boot-brain/lib_sparc/bootm.c
Kumar Gala 396f635b8f bootm: refactor image detection and os load steps
Created a bootm_start() that handles the parsing and detection of all
the images that will be used by the bootm command (OS, ramdisk, fdt).
As part of this we now tract all the relevant image offsets in the
bootm_headers_t struct. This will allow us to have all the needed
state for future sub-commands and lets us reduce a bit of arch
specific code on SPARC.

Created a bootm_load_os() that deals with decompression and loading
the OS image.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:41:43 +02:00

187 lines
5.4 KiB
C

/* SPARC code for booting linux 2.6
*
* (C) Copyright 2007
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/byteorder.h>
#include <asm/prom.h>
#include <asm/cache.h>
#define PRINT_KERNEL_HEADER
extern image_header_t header;
extern void srmmu_init_cpu(unsigned int entry);
extern void prepare_bootargs(char *bootargs);
extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
#ifdef CONFIG_USB_UHCI
extern int usb_lowlevel_stop(void);
#endif
/* sparc kernel argument (the ROM vector) */
struct linux_romvec *kernel_arg_promvec;
/* page szie is 4k */
#define PAGE_SIZE 0x1000
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
struct __attribute__ ((packed)) {
char traptable[PAGE_SIZE];
char swapper_pg_dir[PAGE_SIZE];
char pg0[PAGE_SIZE];
char pg1[PAGE_SIZE];
char pg2[PAGE_SIZE];
char pg3[PAGE_SIZE];
char empty_bad_page[PAGE_SIZE];
char empty_bad_page_table[PAGE_SIZE];
char empty_zero_page[PAGE_SIZE];
unsigned char hdr[4]; /* ascii "HdrS" */
/* 00.02.06.0b is for Linux kernel 2.6.11 */
unsigned char linuxver_mega_major;
unsigned char linuxver_major;
unsigned char linuxver_minor;
unsigned char linuxver_revision;
/* header version 0x0203 */
unsigned short hdr_ver;
union __attribute__ ((packed)) {
struct __attribute__ ((packed)) {
unsigned short root_flags;
unsigned short root_dev;
unsigned short ram_flags;
unsigned int sparc_ramdisk_image;
unsigned int sparc_ramdisk_size;
unsigned int reboot_command;
unsigned int resv[3];
unsigned int end;
} ver_0203;
} hdr_input;
} *linux_hdr;
/* temporary initrd image holder */
image_header_t ihdr;
/* boot the linux kernel */
void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
bootm_headers_t * images)
{
char *bootargs;
ulong initrd_start, initrd_end;
ulong rd_len;
unsigned int data, len, checksum;
unsigned int initrd_addr, kernend;
void (*kernel) (struct linux_romvec *, void *);
struct lmb *lmb = &images->lmb;
int ret;
/* Get virtual address of kernel start */
linux_hdr = (void *)images->os.load;
/* */
kernel = (void (*)(struct linux_romvec *, void *))images->ep;
/* check for a SPARC kernel */
if ((linux_hdr->hdr[0] != 'H') ||
(linux_hdr->hdr[1] != 'd') ||
(linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
puts("Error reading header of SPARC Linux kernel, aborting\n");
goto error;
}
#ifdef PRINT_KERNEL_HEADER
printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
linux_hdr->linuxver_major,
linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
#endif
#ifdef CONFIG_USB_UHCI
usb_lowlevel_stop();
#endif
/* set basic boot params in kernel header now that it has been
* extracted and is writeable.
*/
/* Calc length of RAM disk, if zero no ramdisk available */
rd_len = images->rd_end - images->rd_start;
if (rd_len) {
/* Reserve the space used by PROM and stack. This is done
* to avoid that the RAM image is copied over stack or
* PROM.
*/
lmb_reserve(lmb, CFG_RELOC_MONITOR_BASE, CFG_RAM_END);
ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
&initrd_start, &initrd_end);
if (ret) {
puts("### Failed to relocate RAM disk\n");
goto error;
}
/* Update SPARC kernel header so that Linux knows
* what is going on and where to find RAM disk.
*
* Set INITRD Image address relative to RAM Start
*/
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
initrd_start - CFG_RAM_BASE;
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
/* Clear READ ONLY flag if set to non-zero */
linux_hdr->hdr_input.ver_0203.root_flags = 1;
/* Set root device to: Root_RAM0 */
linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
linux_hdr->hdr_input.ver_0203.ram_flags = 0;
} else {
/* NOT using RAMDISK image, overwriting kernel defaults */
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
/* Leave to kernel defaults
linux_hdr->hdr_input.ver_0203.root_flags = 1;
linux_hdr->hdr_input.ver_0203.root_dev = 0;
linux_hdr->hdr_input.ver_0203.ram_flags = 0;
*/
}
/* Copy bootargs from bootargs variable to kernel readable area */
bootargs = getenv("bootargs");
prepare_bootargs(bootargs);
/* turn on mmu & setup context table & page table for process 0 (kernel) */
srmmu_init_cpu((unsigned int)kernel);
/* Enter SPARC Linux kernel
* From now on the only code in u-boot that will be
* executed is the PROM code.
*/
kernel(kernel_arg_promvec, (void *)ep);
/* It will never come to this... */
while (1) ;
error:
do_reset(cmdtp, flag, argc, argv);
return;
}