mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-05 10:46:15 +09:00
65d87d6cfc
As per current android recommendation https://source.android.com/devices/architecture/kernel/modular-kernels 1. Android recovery mode should contain both SOC and ODM kernel modules in the recovery partition. 2. If a kernel module is required both in recovery and normal boot mode, the module has to be located in recovery and vendor partition seperately. 3. Kernel modules used in recovery mode should be independent of vendor and odm partition 4. Recovery image should contain atleast storage, display, keypad, battery and pmic modules. Due to these requirements, recovery image size has increased to >10MB. This patch is to increase recovery partition size for TI devices so that we dont see such flashing error log: sending 'recovery' (12560 KB)... OKAY [ 0.436s] writing 'recovery'... FAILED (remote: too large for partition) finished. total time: 0.458s Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
133 lines
4.1 KiB
C
133 lines
4.1 KiB
C
/*
|
|
* (C) Copyright 2014
|
|
* Texas Instruments Incorporated.
|
|
* Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* Configuration settings for the TI Beagle x15 board.
|
|
* See ti_omap5_common.h for omap5 common settings.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_AM57XX_EVM_H
|
|
#define __CONFIG_AM57XX_EVM_H
|
|
|
|
#include <environment/ti/dfu.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_IODELAY_RECALIBRATION
|
|
#endif
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
/* MMC ENV related defines */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */
|
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
|
#define CONFIG_ENV_SIZE SZ_128K
|
|
#define CONFIG_ENV_OFFSET 0x260000
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
#define CONSOLEDEV "ttyO2"
|
|
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
|
|
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
#define CONFIG_SYS_OMAP_ABE_SYSCK
|
|
|
|
/* Define the default GPT table for eMMC */
|
|
#define PARTS_DEFAULT \
|
|
/* Linux partitions */ \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
/* Android partitions */ \
|
|
"partitions_android=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
|
|
"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
|
|
"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
|
|
"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
|
|
"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
|
|
"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
|
|
"name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
|
|
"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
|
|
"name=system,size=768M,uuid=${uuid_gpt_system};" \
|
|
"name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
|
|
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
|
|
"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
|
|
"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
|
|
"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
|
|
|
|
#define DFUARGS \
|
|
"dfu_bufsiz=0x10000\0" \
|
|
DFU_ALT_INFO_MMC \
|
|
DFU_ALT_INFO_EMMC \
|
|
DFU_ALT_INFO_RAM \
|
|
|
|
#include <configs/ti_omap5_common.h>
|
|
|
|
/* Enhance our eMMC support / experience. */
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
/* CPSW Ethernet */
|
|
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
|
|
#define CONFIG_MII /* Required in net/eth.c */
|
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
|
|
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
|
|
/* USB xHCI HOST */
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
|
|
#define CONFIG_OMAP_USB_PHY
|
|
#define CONFIG_OMAP_USB3PHY1_HOST
|
|
|
|
/* SATA */
|
|
#define CONFIG_LIBATA
|
|
#define CONFIG_SCSI_AHCI
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
|
|
/*
|
|
* Default to using SPI for environment, etc.
|
|
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
|
|
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
|
|
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
|
|
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
|
|
* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
|
|
* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
|
|
* 0x9E0000 - 0x2000000 : USERLAND
|
|
*/
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
|
|
|
|
/* SPI SPL */
|
|
#define CONFIG_TI_EDMA3
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
|
|
|
|
/* SPI */
|
|
#define CONFIG_TI_SPI_MMAP
|
|
#define CONFIG_SF_DEFAULT_SPEED 76800000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_QSPI_QUAD_SUPPORT
|
|
|
|
#endif /* __CONFIG_AM57XX_EVM_H */
|