mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![]() Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> |
||
---|---|---|
.. | ||
ddr.c | ||
eth.c | ||
fixed_ddr.c | ||
Makefile | ||
p3060qds_qixis.h | ||
p3060qds.c | ||
p3060qds.h | ||
README |
Overview ========= The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC. The P3060 Processor combines six e500mc Power Architecture processor cores(1.2GHz) with high-performance datapath acceleration architecture(DPAA), CoreNet fabric infrastructure, as well as network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and military/aerospace applications. P3060QDS Board Specifications: ============================== Memory subsystem: * 2G Bytes UDIMM DDR3(64bit bus) with ECC on * 128M Bytes NOR flash single-chip memory * 16M Bytes SPI flash * 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet(Default SERDES 0x19): * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45) * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45) * FM1-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port1 in slot1) * FM1-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port3 in slot1) * FM2-dTSEC1: connected to SGMII PHY (Vitesse VSC8234 port0 in slot2) * FM2-dTSEC2: connected to SGMII PHY (Vitesse VSC8234 port2 in slot2) * FM2-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port0 in slot1) * FM2-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port2 in slot1) PCIe: * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4 * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3 RapidIO: * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3) * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4) USB: * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface I2C: * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD, AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68) * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D) * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40) * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56) * I2C1_CH4: PCIe SLOT1 * I2C1_CH5: PCIe SLOT2 * I2C1_CH6: PCIe SLOT3 * I2C1_CH7: PCIe SLOT4 * I2C2: NULL * I2C3: NULL UART: * Supports two UARTs up to 115200 bps for console Boot from NOR flash =================== 1. Build image export ARCH=powerpc export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu- make P3060QDS_config make 2. Program image => tftp 1000000 u-boot.bin => protect off all => erase eff80000 efffffff => cp.b 1000000 eff80000 80000 3. Program RCW => tftp 1000000 rcw.bin => protect off all => erase e8000000 e801ffff => cp.b 1000000 e8000000 50 4. Program FMAN Firmware ucode => tftp 1000000 ucode.bin => protect off all => erase ef000000 ef0fffff => cp.b 1000000 ef000000 2000 5. Change DIP-switch RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash) Note: 1 stands for 'on', 0 stands for 'off' Using the Device Tree Source File ================================= To create the DTB (Device Tree Binary) image file, use a command similar to this: dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb Or use the following command: {linux-2.6}/make p3060qds.dtb ARCH=powerpc then the dtb file will be generated under the following directory: {linux-2.6}/arch/powerpc/boot/p3060qds.dtb Booting Linux ============= Place a linux uImage in the TFTP disk area. tftp 1000000 uImage tftp 2000000 rootfs.ext2.gz.uboot tftp 3000000 p3060rdb.dtb bootm 1000000 2000000 3000000