mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![]() Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> |
||
---|---|---|
.. | ||
lowlevel_init.S | ||
Makefile | ||
mx35pdk.c | ||
mx35pdk.h | ||
README |
Overview -------------- mx35pdk (known als as mx35_3stack) is a development board by Freescale. It consists of three pluggable board: - CPU module, with CPU, RAM, flash - Personality board, with most interfaces (USB, Network,..) - Debug board with JTAG header. The board is usually delivered with redboot. This howto explains how to boot a linux kernel and how to replace the original bootloader with U-Boot. The board is delivered with Redboot on the NAND flash. It is possible to switch the boot device with the switches SW1-SW2 on the Personality board, and with SW5-SW10 on the Debug board. Delivered Redboot script to start the kernel --------------------------------------------------- In redboot the following script is stored: fis load kernel exec -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock8 rw rootfstype=jffs2 ip=dhcp fec_mac=00:04:9F:00:E7:76" Kernel is taken from flash. The image is in zImage format. Booting from NET, rootfs on NFS: ----------------------------------- To change the script in redboot: load -r -b 0x100000 <path_to_zImage> exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/armVFP rw ip=dhcp" If the ip address is not set, you can set it with : ip_address -l <board_ip/netmask> -h <server_ip> Linux partitions: --------------------------- As default, the board is shipped with these partition tables for NAND and for NOR: Creating 5 MTD partitions on "NAND 2GiB 3,3V 8-bit": 0x00000000-0x00100000 : "nand.bootloader" 0x00100000-0x00600000 : "nand.kernel" 0x00600000-0x06600000 : "nand.rootfs" 0x06600000-0x06e00000 : "nand.configure" 0x06e00000-0x80000000 : "nand.userfs" Creating 6 MTD partitions on "mxc_nor_flash.0": 0x00000000-0x00080000 : "Bootloader" 0x00080000-0x00480000 : "nor.Kernel" 0x00480000-0x02280000 : "nor.userfs" 0x02280000-0x03e80000 : "nor.rootfs" 0x01fe0000-0x01fe3000 : "FIS directory" 0x01fff000-0x04000000 : "Redboot config" NAND partitions can be recognized enabling in kernel CONFIG_MTD_REDBOOT_PARTS. For this board, CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK should be set to 2. However, the setup in redboot is not correct and does not use the whole flash. Better solution is to use the kernel parameter mtdparts. Here the resulting script to be defined in RedBoot with fconfig: load -r -b 0x100000 sbabic/mx35pdk/zImage.2.6.37 exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/arm rw ip=dhcp mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" Flashing U-Boot -------------------------------- There are two options: the original bootloader in NAND can be replaced with u-boot, or u-boot can be stored on the NOR flash without erasing the delivered bootloader. The boot storage can be select using the switches on the personality board (SW1-SW2) and on the DEBUG board (SW4-SW10). The second option is to be preferred if you have not a JTAG debugger. If something goes wrong flashing the bootloader, it is always possible to recover the board booting from the other device. Replacing the bootloader on the NAND -------------------------------------- To replace RedBoot with U-Boot, the easy way is to do this in linux. Start the kernel with the suggested options. Make sure to have set the mtdparts exactly as described, because this matches the layout on the mx35pdk. You should see in your boot log the following entries for the NAND flash: 5 cmdlinepart partitions found on MTD device mxc_nand Creating 5 MTD partitions on "mxc_nand": 0x000000000000-0x000000100000 : "boot" 0x000000100000-0x000000600000 : "linux" 0x000000600000-0x000006600000 : "root" 0x000006600000-0x000006e00000 : "cfg" 0x000006e00000-0x000080000000 : "user" You can use the utilities flash_eraseall and nandwrite to put u-boot on the NAND. The bootloader is marked as "boot", and 1MB is reserved. If everything is correct, this partition is accessed as /dev/mtd4. However, check if it is correct with "cat /proc/mtd" and get the device node from the partition name: $ cat /proc/mtd | grep boot I suggest you try the utilities on a different partition to be sure if everything works correctly. If not, and you remove RedBoot, you have to reinstall it using the ATK tool as suggested by Freescale, or using a JTAG debugger. I report the versions of the utilities I used (they are provided with ELDK): -bash-3.2# nandwrite --version nandwrite $Revision: 1.32 $ flash_eraseall --version flash_eraseall $Revision: 1.22 $ nandwrite reports a warning if the file to be saved is not sector aligned. This should have no consequences, but I preferred to pad u-boot.bin to get no problem at all. $ dd if=/dev/zero of=zeros bs=1 count=74800 $ cat u-boot.bin zeros > u-boot-padded.bin To erase the partition: $ flash_eraseall /dev/mtd4 Writing u-boot: $ nandwrite /dev/mtd4 u-boot-padded.bin Now U-Boot is stored on the booting partition. To boot from NAND, you have to select the switches as follows: Personality board SW2 1, 4, 5 on 2, 3, 6, 7, 8 off SW1 all off Debug Board: SW5 0 SW6 0 SW7 0 SW8 1 SW9 1 SW10 0 Saving U-Boot in the NOR flash --------------------------------- The procedure to save in the NOR flash is quite the same as to write into the NAND. Check the partition for boot in the NOR flash. Setting the mtdparts as reported, the boot partition should be /dev/mtd0. Creating 6 MTD partitions on "mxc_nor_flash.0": 0x00000000-0x00080000 : "Bootloader" 0x00080000-0x00480000 : "nor.Kernel" 0x00480000-0x02280000 : "nor.userfs" 0x02280000-0x03e80000 : "nor.rootfs" 0x01fe0000-0x01fe3000 : "FIS directory" 0x01fff000-0x04000000 : "Redboot config" To erase the whole partition: $ flash_eraseall /dev/mtd0 Writing u-boot: dd if=u-boot.bin of=/dev/mtd0 To boot from NOR, you have to select the switches as follows: Personality board SW2 all off SW1 all off Debug Board: SW5 0 SW6 0 SW7 0 SW8 1 SW9 1 SW10 0