mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 05:13:21 +09:00
![Poonam_Aggrwal-b10812](/assets/img/avatar_default.png)
This errata fix is required for 32 bit DDR2 controller on 8572. May also be required for P10XX20XX platforms Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
116 lines
3.7 KiB
C
116 lines
3.7 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
|
|
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
|
|
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
|
|
#endif
|
|
|
|
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
|
|
unsigned int ctrl_num)
|
|
{
|
|
unsigned int i;
|
|
volatile ccsr_ddr_t *ddr;
|
|
u32 temp_sdram_cfg;
|
|
|
|
switch (ctrl_num) {
|
|
case 0:
|
|
ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
|
|
break;
|
|
case 1:
|
|
ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
|
|
break;
|
|
default:
|
|
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
if (i == 0) {
|
|
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
|
|
out_be32(&ddr->cs0_config, regs->cs[i].config);
|
|
out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 1) {
|
|
out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
|
|
out_be32(&ddr->cs1_config, regs->cs[i].config);
|
|
out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 2) {
|
|
out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
|
|
out_be32(&ddr->cs2_config, regs->cs[i].config);
|
|
out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 3) {
|
|
out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
|
|
out_be32(&ddr->cs3_config, regs->cs[i].config);
|
|
out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
|
|
}
|
|
}
|
|
|
|
out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
|
|
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
|
|
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
|
|
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
|
|
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
|
|
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
|
|
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
|
|
out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
|
|
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
|
|
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
|
|
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
|
|
out_be32(&ddr->init_addr, regs->ddr_init_addr);
|
|
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
|
|
|
|
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
|
|
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
|
|
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
|
|
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
|
|
out_be32(&ddr->ddr_pd_cntl, regs->ddr_pd_cntl);
|
|
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
|
|
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
|
|
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
|
|
|
|
/* Do not enable the memory */
|
|
temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
|
|
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
|
|
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
|
|
/*
|
|
* For 8572 DDR1 erratum - DDR controller may enter illegal state
|
|
* when operatiing in 32-bit bus mode with 4-beat bursts,
|
|
* This erratum does not affect DDR3 mode, only for DDR2 mode.
|
|
*/
|
|
#ifdef CONFIG_MPC8572
|
|
if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
|
|
&& in_be32(&ddr->sdram_cfg) & 0x80000) {
|
|
/* set DEBUG_1[31] */
|
|
u32 temp = in_be32(&ddr->debug_1);
|
|
out_be32(&ddr->debug_1, temp | 1);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* 200 painful micro-seconds must elapse between
|
|
* the DDR clock setup and the DDR config enable.
|
|
*/
|
|
udelay(200);
|
|
asm volatile("sync;isync");
|
|
|
|
/* Let the controller go */
|
|
temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
|
|
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
|
|
|
|
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
|
|
while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
|
|
udelay(10000); /* throttle polling rate */
|
|
}
|
|
}
|