u-boot-brain/arch/arm
David Wu dfb886d4f2 rockchip: pinctrl: Add rk3328 gmac pinctrl support
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2
and bit10 at com iomux register. After that, set rgmii m1 tx
pins to 12ma drive-strength, and clean others to 2ma.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28 17:12:37 +01:00
..
cpu common: board_f: vid: Add VID specific API to adjust core voltage 2018-01-23 11:20:46 -08:00
dts rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality 2018-01-28 17:12:36 +01:00
include rockchip: pinctrl: Add rk3328 gmac pinctrl support 2018-01-28 17:12:37 +01:00
lib efi_selftest: test start image 2018-01-22 23:09:14 +01:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 board: laird: add WB50N CPU module 2017-11-29 22:36:59 -05:00
mach-bcm283x add support for Raspberry Pi Zero W 2017-12-04 09:59:02 -05:00
mach-davinci Convert CONFIG_SOC_DA8XX et al to Kconfig 2018-01-22 20:09:26 -05:00
mach-exynos usb: net: migrate USB Ethernet adapters to Kconfig 2017-09-08 10:23:00 -04:00
mach-highbank
mach-imx Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-keystone cmd: ti: Generalize cmd_ddr3 command 2018-01-19 15:49:26 -05:00
mach-kirkwood ata: Migrate CONFIG_MVSATA_IDE to Kconfig 2017-12-12 18:16:06 -05:00
mach-meson ARM: arch-meson: fix writel arguments order 2017-12-18 13:06:30 -05:00
mach-mvebu arm: mvebu: enable boot from NAND 2017-11-30 08:30:27 +01:00
mach-omap2 arm: mach-omap2: Remove secure certificate name printing 2018-01-19 15:49:30 -05:00
mach-orion5x spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
mach-qemu ARM: qemu-arm: Add support for AArch64 2018-01-19 15:49:30 -05:00
mach-rmobile ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig 2018-01-24 23:27:21 +01:00
mach-rockchip rockchip: rk3288: enable rockusb support on rk3288 based device 2018-01-10 11:11:06 +01:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon db820c: add qualcomm dragonboard 820C support 2018-01-15 16:29:02 -05:00
mach-socfpga ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32 2018-01-26 13:08:03 -05:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 configs: stm32: move config flag from defconfig to Kconfig 2018-01-19 15:49:32 -05:00
mach-sunxi sunxi: set the default CPUx frequency of H5 to 816MHz 2017-12-02 21:55:25 +05:30
mach-tegra ARM: Tegra186: calculate load addresses at boot 2018-01-12 10:12:32 -07:00
mach-uniphier ARM: uniphier: hide memory top by platform hook instead of CONFIG 2018-01-09 21:58:19 +09:00
mach-versatile
mach-zynq mtd: zynq: nand: Move board_nand_init() function to board.c 2017-11-29 08:02:40 +01:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk binman: arm: Include the binman symbol table 2017-12-12 19:53:45 -07:00
Kconfig sunxi: imply CONFIG_OF_LIBFDT_OVERLAY 2018-01-26 20:02:33 +05:30
Kconfig.debug
Makefile imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00