u-boot-brain/drivers/net/macb.c
Stefan Roese 5ccd657b6d net: macb: Fix rx buffer cache handling
With commit c6d07bf440 ("net/macb: increase RX buffer size for GEM")
ethernet support does not work any more with d-cache enabled on the
AT91SAM. The reason is, that MACB_RX_BUFFER_SIZE was changed from 4096
to 128 but this change was not refected in the rx_buffer flush and
invalidate functions, as these also use this macro.

This patch now fixes this by calculating the rx buffer size correctly
again in those functions. With this change, ethernet works again
reliably on my AT91SAM board.

Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: c6d07bf440 ("net/macb: increase RX buffer size for GEM")
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00

1347 lines
31 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2005-2006 Atmel Corporation
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
/*
* The u-boot networking stack is a little weird. It seems like the
* networking core allocates receive buffers up front without any
* regard to the hardware that's supposed to actually receive those
* packets.
*
* The MACB receives packets into 128-byte receive buffers, so the
* buffers allocated by the core isn't very practical to use. We'll
* allocate our own, but we need one such buffer in case a packet
* wraps around the DMA ring so that we have to copy it.
*
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
* configuration header. This way, the core allocates one RX buffer
* and one TX buffer, each of which can hold a ethernet packet of
* maximum size.
*
* For some reason, the networking core unconditionally specifies a
* 32-byte packet "alignment" (which really should be called
* "padding"). MACB shouldn't need that, but we'll refrain from any
* core modifications here...
*/
#include <net.h>
#ifndef CONFIG_DM_ETH
#include <netdev.h>
#endif
#include <malloc.h>
#include <miiphy.h>
#include <linux/mii.h>
#include <asm/io.h>
#include <asm/dma-mapping.h>
#include <asm/arch/clk.h>
#include <linux/errno.h>
#include "macb.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* These buffer sizes must be power of 2 and divisible
* by RX_BUFFER_MULTIPLE
*/
#define MACB_RX_BUFFER_SIZE 128
#define GEM_RX_BUFFER_SIZE 2048
#define RX_BUFFER_MULTIPLE 64
#define MACB_RX_RING_SIZE 32
#define MACB_TX_RING_SIZE 16
#define MACB_TX_TIMEOUT 1000
#define MACB_AUTONEG_TIMEOUT 5000000
#ifdef CONFIG_MACB_ZYNQ
/* INCR4 AHB bursts */
#define MACB_ZYNQ_GEM_DMACR_BLENGTH 0x00000004
/* Use full configured addressable space (8 Kb) */
#define MACB_ZYNQ_GEM_DMACR_RXSIZE 0x00000300
/* Use full configured addressable space (4 Kb) */
#define MACB_ZYNQ_GEM_DMACR_TXSIZE 0x00000400
/* Set RXBUF with use of 128 byte */
#define MACB_ZYNQ_GEM_DMACR_RXBUF 0x00020000
#define MACB_ZYNQ_GEM_DMACR_INIT \
(MACB_ZYNQ_GEM_DMACR_BLENGTH | \
MACB_ZYNQ_GEM_DMACR_RXSIZE | \
MACB_ZYNQ_GEM_DMACR_TXSIZE | \
MACB_ZYNQ_GEM_DMACR_RXBUF)
#endif
struct macb_dma_desc {
u32 addr;
u32 ctrl;
};
#define DMA_DESC_BYTES(n) (n * sizeof(struct macb_dma_desc))
#define MACB_TX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_TX_RING_SIZE))
#define MACB_RX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_RX_RING_SIZE))
#define MACB_TX_DUMMY_DMA_DESC_SIZE (DMA_DESC_BYTES(1))
#define RXBUF_FRMLEN_MASK 0x00000fff
#define TXBUF_FRMLEN_MASK 0x000007ff
struct macb_device {
void *regs;
bool is_big_endian;
const struct macb_config *config;
unsigned int rx_tail;
unsigned int tx_head;
unsigned int tx_tail;
unsigned int next_rx_tail;
bool wrapped;
void *rx_buffer;
void *tx_buffer;
struct macb_dma_desc *rx_ring;
struct macb_dma_desc *tx_ring;
size_t rx_buffer_size;
unsigned long rx_buffer_dma;
unsigned long rx_ring_dma;
unsigned long tx_ring_dma;
struct macb_dma_desc *dummy_desc;
unsigned long dummy_desc_dma;
const struct device *dev;
#ifndef CONFIG_DM_ETH
struct eth_device netdev;
#endif
unsigned short phy_addr;
struct mii_dev *bus;
#ifdef CONFIG_PHYLIB
struct phy_device *phydev;
#endif
#ifdef CONFIG_DM_ETH
#ifdef CONFIG_CLK
unsigned long pclk_rate;
#endif
phy_interface_t phy_interface;
#endif
};
struct macb_config {
unsigned int dma_burst_length;
int (*clk_init)(struct udevice *dev, ulong rate);
};
#ifndef CONFIG_DM_ETH
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
#endif
static int macb_is_gem(struct macb_device *macb)
{
return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) >= 0x2;
}
#ifndef cpu_is_sama5d2
#define cpu_is_sama5d2() 0
#endif
#ifndef cpu_is_sama5d4
#define cpu_is_sama5d4() 0
#endif
static int gem_is_gigabit_capable(struct macb_device *macb)
{
/*
* The GEM controllers embedded in SAMA5D2 and SAMA5D4 are
* configured to support only 10/100.
*/
return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();
}
static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 1)
| MACB_BF(PHYA, macb->phy_addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2)
| MACB_BF(DATA, value));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
}
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 2)
| MACB_BF(PHYA, macb->phy_addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
frame = macb_readl(macb, MAN);
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
return MACB_BFEXT(DATA, frame);
}
void __weak arch_get_mdio_control(const char *name)
{
return;
}
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
int macb_miiphy_read(struct mii_dev *bus, int phy_adr, int devad, int reg)
{
u16 value = 0;
#ifdef CONFIG_DM_ETH
struct udevice *dev = eth_get_dev_by_name(bus->name);
struct macb_device *macb = dev_get_priv(dev);
#else
struct eth_device *dev = eth_get_dev_by_name(bus->name);
struct macb_device *macb = to_macb(dev);
#endif
if (macb->phy_addr != phy_adr)
return -1;
arch_get_mdio_control(bus->name);
value = macb_mdio_read(macb, reg);
return value;
}
int macb_miiphy_write(struct mii_dev *bus, int phy_adr, int devad, int reg,
u16 value)
{
#ifdef CONFIG_DM_ETH
struct udevice *dev = eth_get_dev_by_name(bus->name);
struct macb_device *macb = dev_get_priv(dev);
#else
struct eth_device *dev = eth_get_dev_by_name(bus->name);
struct macb_device *macb = to_macb(dev);
#endif
if (macb->phy_addr != phy_adr)
return -1;
arch_get_mdio_control(bus->name);
macb_mdio_write(macb, reg, value);
return 0;
}
#endif
#define RX 1
#define TX 0
static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool rx)
{
if (rx)
invalidate_dcache_range(macb->rx_ring_dma,
ALIGN(macb->rx_ring_dma + MACB_RX_DMA_DESC_SIZE,
PKTALIGN));
else
invalidate_dcache_range(macb->tx_ring_dma,
ALIGN(macb->tx_ring_dma + MACB_TX_DMA_DESC_SIZE,
PKTALIGN));
}
static inline void macb_flush_ring_desc(struct macb_device *macb, bool rx)
{
if (rx)
flush_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
ALIGN(MACB_RX_DMA_DESC_SIZE, PKTALIGN));
else
flush_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
ALIGN(MACB_TX_DMA_DESC_SIZE, PKTALIGN));
}
static inline void macb_flush_rx_buffer(struct macb_device *macb)
{
flush_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
ALIGN(macb->rx_buffer_size * MACB_RX_RING_SIZE,
PKTALIGN));
}
static inline void macb_invalidate_rx_buffer(struct macb_device *macb)
{
invalidate_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
ALIGN(macb->rx_buffer_size * MACB_RX_RING_SIZE,
PKTALIGN));
}
#if defined(CONFIG_CMD_NET)
static int _macb_send(struct macb_device *macb, const char *name, void *packet,
int length)
{
unsigned long paddr, ctrl;
unsigned int tx_head = macb->tx_head;
int i;
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= MACB_BIT(TX_LAST);
if (tx_head == (MACB_TX_RING_SIZE - 1)) {
ctrl |= MACB_BIT(TX_WRAP);
macb->tx_head = 0;
} else {
macb->tx_head++;
}
macb->tx_ring[tx_head].ctrl = ctrl;
macb->tx_ring[tx_head].addr = paddr;
barrier();
macb_flush_ring_desc(macb, TX);
/* Do we need check paddr and length is dcache line aligned? */
flush_dcache_range(paddr, paddr + ALIGN(length, ARCH_DMA_MINALIGN));
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
/*
* I guess this is necessary because the networking core may
* re-use the transmit buffer as soon as we return...
*/
for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
barrier();
macb_invalidate_ring_desc(macb, TX);
ctrl = macb->tx_ring[tx_head].ctrl;
if (ctrl & MACB_BIT(TX_USED))
break;
udelay(1);
}
dma_unmap_single(packet, length, paddr);
if (i <= MACB_TX_TIMEOUT) {
if (ctrl & MACB_BIT(TX_UNDERRUN))
printf("%s: TX underrun\n", name);
if (ctrl & MACB_BIT(TX_BUF_EXHAUSTED))
printf("%s: TX buffers exhausted in mid frame\n", name);
} else {
printf("%s: TX timeout\n", name);
}
/* No one cares anyway */
return 0;
}
static void reclaim_rx_buffers(struct macb_device *macb,
unsigned int new_tail)
{
unsigned int i;
i = macb->rx_tail;
macb_invalidate_ring_desc(macb, RX);
while (i > new_tail) {
macb->rx_ring[i].addr &= ~MACB_BIT(RX_USED);
i++;
if (i > MACB_RX_RING_SIZE)
i = 0;
}
while (i < new_tail) {
macb->rx_ring[i].addr &= ~MACB_BIT(RX_USED);
i++;
}
barrier();
macb_flush_ring_desc(macb, RX);
macb->rx_tail = new_tail;
}
static int _macb_recv(struct macb_device *macb, uchar **packetp)
{
unsigned int next_rx_tail = macb->next_rx_tail;
void *buffer;
int length;
u32 status;
macb->wrapped = false;
for (;;) {
macb_invalidate_ring_desc(macb, RX);
if (!(macb->rx_ring[next_rx_tail].addr & MACB_BIT(RX_USED)))
return -EAGAIN;
status = macb->rx_ring[next_rx_tail].ctrl;
if (status & MACB_BIT(RX_SOF)) {
if (next_rx_tail != macb->rx_tail)
reclaim_rx_buffers(macb, next_rx_tail);
macb->wrapped = false;
}
if (status & MACB_BIT(RX_EOF)) {
buffer = macb->rx_buffer +
macb->rx_buffer_size * macb->rx_tail;
length = status & RXBUF_FRMLEN_MASK;
macb_invalidate_rx_buffer(macb);
if (macb->wrapped) {
unsigned int headlen, taillen;
headlen = macb->rx_buffer_size *
(MACB_RX_RING_SIZE - macb->rx_tail);
taillen = length - headlen;
memcpy((void *)net_rx_packets[0],
buffer, headlen);
memcpy((void *)net_rx_packets[0] + headlen,
macb->rx_buffer, taillen);
*packetp = (void *)net_rx_packets[0];
} else {
*packetp = buffer;
}
if (++next_rx_tail >= MACB_RX_RING_SIZE)
next_rx_tail = 0;
macb->next_rx_tail = next_rx_tail;
return length;
} else {
if (++next_rx_tail >= MACB_RX_RING_SIZE) {
macb->wrapped = true;
next_rx_tail = 0;
}
}
barrier();
}
}
static void macb_phy_reset(struct macb_device *macb, const char *name)
{
int i;
u16 status, adv;
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
macb_mdio_write(macb, MII_ADVERTISE, adv);
printf("%s: Starting autonegotiation...\n", name);
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
| BMCR_ANRESTART));
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_ANEGCOMPLETE)
break;
udelay(100);
}
if (status & BMSR_ANEGCOMPLETE)
printf("%s: Autonegotiation complete\n", name);
else
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
name, status);
}
static int macb_phy_find(struct macb_device *macb, const char *name)
{
int i;
u16 phy_id;
/* Search for PHY... */
for (i = 0; i < 32; i++) {
macb->phy_addr = i;
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id != 0xffff) {
printf("%s: PHY present at %d\n", name, i);
return 0;
}
}
/* PHY isn't up to snuff */
printf("%s: PHY not found\n", name);
return -ENODEV;
}
/**
* macb_linkspd_cb - Linkspeed change callback function
* @dev/@regs: MACB udevice (DM version) or
* Base Register of MACB devices (non-DM version)
* @speed: Linkspeed
* Returns 0 when operation success and negative errno number
* when operation failed.
*/
#ifdef CONFIG_DM_ETH
static int macb_sifive_clk_init(struct udevice *dev, ulong rate)
{
fdt_addr_t addr;
void *gemgxl_regs;
addr = dev_read_addr_index(dev, 1);
if (addr == FDT_ADDR_T_NONE)
return -ENODEV;
gemgxl_regs = (void __iomem *)addr;
if (!gemgxl_regs)
return -ENODEV;
/*
* SiFive GEMGXL TX clock operation mode:
*
* 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic
* and output clock on GMII output signal GTX_CLK
* 1 = MII mode. Use MII input signal TX_CLK in TX logic
*/
writel(rate != 125000000, gemgxl_regs);
return 0;
}
int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
{
#ifdef CONFIG_CLK
struct macb_device *macb = dev_get_priv(dev);
struct clk tx_clk;
ulong rate;
int ret;
switch (speed) {
case _10BASET:
rate = 2500000; /* 2.5 MHz */
break;
case _100BASET:
rate = 25000000; /* 25 MHz */
break;
case _1000BASET:
rate = 125000000; /* 125 MHz */
break;
default:
/* does not change anything */
return 0;
}
if (macb->config->clk_init)
return macb->config->clk_init(dev, rate);
/*
* "tx_clk" is an optional clock source for MACB.
* Ignore if it does not exist in DT.
*/
ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
if (ret)
return 0;
if (tx_clk.dev) {
ret = clk_set_rate(&tx_clk, rate);
if (ret)
return ret;
}
#endif
return 0;
}
#else
int __weak macb_linkspd_cb(void *regs, unsigned int speed)
{
return 0;
}
#endif
#ifdef CONFIG_DM_ETH
static int macb_phy_init(struct udevice *dev, const char *name)
#else
static int macb_phy_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
struct macb_device *macb = dev_get_priv(dev);
#endif
u32 ncfgr;
u16 phy_id, status, adv, lpa;
int media, speed, duplex;
int ret;
int i;
arch_get_mdio_control(name);
/* Auto-detect phy_addr */
ret = macb_phy_find(macb, name);
if (ret)
return ret;
/* Check if the PHY is up to snuff... */
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", name);
return -ENODEV;
}
#ifdef CONFIG_PHYLIB
#ifdef CONFIG_DM_ETH
macb->phydev = phy_connect(macb->bus, macb->phy_addr, dev,
macb->phy_interface);
#else
/* need to consider other phy interface mode */
macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev,
PHY_INTERFACE_MODE_RGMII);
#endif
if (!macb->phydev) {
printf("phy_connect failed\n");
return -ENODEV;
}
phy_config(macb->phydev);
#endif
status = macb_mdio_read(macb, MII_BMSR);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb, name);
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS) {
/*
* Delay a bit after the link is established,
* so that the next xfer does not fail
*/
mdelay(10);
break;
}
udelay(100);
}
}
if (!(status & BMSR_LSTATUS)) {
printf("%s: link down (status: 0x%04x)\n",
name, status);
return -ENETDOWN;
}
/* First check for GMAC and that it is GiB capable */
if (gem_is_gigabit_capable(macb)) {
lpa = macb_mdio_read(macb, MII_STAT1000);
if (lpa & (LPA_1000FULL | LPA_1000HALF | LPA_1000XFULL |
LPA_1000XHALF)) {
duplex = ((lpa & (LPA_1000FULL | LPA_1000XFULL)) ?
1 : 0);
printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
name,
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
ncfgr |= GEM_BIT(GBE);
if (duplex)
ncfgr |= MACB_BIT(FD);
macb_writel(macb, NCFGR, ncfgr);
#ifdef CONFIG_DM_ETH
ret = macb_linkspd_cb(dev, _1000BASET);
#else
ret = macb_linkspd_cb(macb->regs, _1000BASET);
#endif
if (ret)
return ret;
return 0;
}
}
/* fall back for EMAC checking */
adv = macb_mdio_read(macb, MII_ADVERTISE);
lpa = macb_mdio_read(macb, MII_LPA);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
name,
speed ? "100" : "10",
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
if (speed) {
ncfgr |= MACB_BIT(SPD);
#ifdef CONFIG_DM_ETH
ret = macb_linkspd_cb(dev, _100BASET);
#else
ret = macb_linkspd_cb(macb->regs, _100BASET);
#endif
} else {
#ifdef CONFIG_DM_ETH
ret = macb_linkspd_cb(dev, _10BASET);
#else
ret = macb_linkspd_cb(macb->regs, _10BASET);
#endif
}
if (ret)
return ret;
if (duplex)
ncfgr |= MACB_BIT(FD);
macb_writel(macb, NCFGR, ncfgr);
return 0;
}
static int gmac_init_multi_queues(struct macb_device *macb)
{
int i, num_queues = 1;
u32 queue_mask;
/* bit 0 is never set but queue 0 always exists */
queue_mask = gem_readl(macb, DCFG6) & 0xff;
queue_mask |= 0x1;
for (i = 1; i < MACB_MAX_QUEUES; i++)
if (queue_mask & (1 << i))
num_queues++;
macb->dummy_desc->ctrl = MACB_BIT(TX_USED);
macb->dummy_desc->addr = 0;
flush_dcache_range(macb->dummy_desc_dma, macb->dummy_desc_dma +
ALIGN(MACB_TX_DUMMY_DMA_DESC_SIZE, PKTALIGN));
for (i = 1; i < num_queues; i++)
gem_writel_queue_TBQP(macb, macb->dummy_desc_dma, i - 1);
return 0;
}
static void gmac_configure_dma(struct macb_device *macb)
{
u32 buffer_size;
u32 dmacfg;
buffer_size = macb->rx_buffer_size / RX_BUFFER_MULTIPLE;
dmacfg = gem_readl(macb, DMACFG) & ~GEM_BF(RXBS, -1L);
dmacfg |= GEM_BF(RXBS, buffer_size);
if (macb->config->dma_burst_length)
dmacfg = GEM_BFINS(FBLDO,
macb->config->dma_burst_length, dmacfg);
dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
dmacfg &= ~GEM_BIT(ENDIA_PKT);
if (macb->is_big_endian)
dmacfg |= GEM_BIT(ENDIA_DESC); /* CPU in big endian */
else
dmacfg &= ~GEM_BIT(ENDIA_DESC);
dmacfg &= ~GEM_BIT(ADDR64);
gem_writel(macb, DMACFG, dmacfg);
}
#ifdef CONFIG_DM_ETH
static int _macb_init(struct udevice *dev, const char *name)
#else
static int _macb_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
struct macb_device *macb = dev_get_priv(dev);
#endif
unsigned long paddr;
int ret;
int i;
/*
* macb_halt should have been called at some point before now,
* so we'll assume the controller is idle.
*/
/* initialize DMA descriptors */
paddr = macb->rx_buffer_dma;
for (i = 0; i < MACB_RX_RING_SIZE; i++) {
if (i == (MACB_RX_RING_SIZE - 1))
paddr |= MACB_BIT(RX_WRAP);
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += macb->rx_buffer_size;
}
macb_flush_ring_desc(macb, RX);
macb_flush_rx_buffer(macb);
for (i = 0; i < MACB_TX_RING_SIZE; i++) {
macb->tx_ring[i].addr = 0;
if (i == (MACB_TX_RING_SIZE - 1))
macb->tx_ring[i].ctrl = MACB_BIT(TX_USED) |
MACB_BIT(TX_WRAP);
else
macb->tx_ring[i].ctrl = MACB_BIT(TX_USED);
}
macb_flush_ring_desc(macb, TX);
macb->rx_tail = 0;
macb->tx_head = 0;
macb->tx_tail = 0;
macb->next_rx_tail = 0;
#ifdef CONFIG_MACB_ZYNQ
macb_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT);
#endif
macb_writel(macb, RBQP, macb->rx_ring_dma);
macb_writel(macb, TBQP, macb->tx_ring_dma);
if (macb_is_gem(macb)) {
/* Initialize DMA properties */
gmac_configure_dma(macb);
/* Check the multi queue and initialize the queue for tx */
gmac_init_multi_queues(macb);
/*
* When the GMAC IP with GE feature, this bit is used to
* select interface between RGMII and GMII.
* When the GMAC IP without GE feature, this bit is used
* to select interface between RMII and MII.
*/
#ifdef CONFIG_DM_ETH
if ((macb->phy_interface == PHY_INTERFACE_MODE_RMII) ||
(macb->phy_interface == PHY_INTERFACE_MODE_RGMII))
gem_writel(macb, USRIO, GEM_BIT(RGMII));
else
gem_writel(macb, USRIO, 0);
if (macb->phy_interface == PHY_INTERFACE_MODE_SGMII) {
unsigned int ncfgr = macb_readl(macb, NCFGR);
ncfgr |= GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL);
macb_writel(macb, NCFGR, ncfgr);
}
#else
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
gem_writel(macb, USRIO, GEM_BIT(RGMII));
#else
gem_writel(macb, USRIO, 0);
#endif
#endif
} else {
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_DM_ETH
#ifdef CONFIG_AT91FAMILY
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) {
macb_writel(macb, USRIO,
MACB_BIT(RMII) | MACB_BIT(CLKEN));
} else {
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
}
#else
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
macb_writel(macb, USRIO, 0);
else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#else
#ifdef CONFIG_RMII
#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#endif /* CONFIG_RMII */
#endif
}
#ifdef CONFIG_DM_ETH
ret = macb_phy_init(dev, name);
#else
ret = macb_phy_init(macb, name);
#endif
if (ret)
return ret;
/* Enable TX and RX */
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
return 0;
}
static void _macb_halt(struct macb_device *macb)
{
u32 ncr, tsr;
/* Halt the controller and wait for any ongoing transmission to end. */
ncr = macb_readl(macb, NCR);
ncr |= MACB_BIT(THALT);
macb_writel(macb, NCR, ncr);
do {
tsr = macb_readl(macb, TSR);
} while (tsr & MACB_BIT(TGO));
/* Disable TX and RX, and clear statistics */
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
}
static int _macb_write_hwaddr(struct macb_device *macb, unsigned char *enetaddr)
{
u32 hwaddr_bottom;
u16 hwaddr_top;
/* set hardware address */
hwaddr_bottom = enetaddr[0] | enetaddr[1] << 8 |
enetaddr[2] << 16 | enetaddr[3] << 24;
macb_writel(macb, SA1B, hwaddr_bottom);
hwaddr_top = enetaddr[4] | enetaddr[5] << 8;
macb_writel(macb, SA1T, hwaddr_top);
return 0;
}
static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
{
u32 config;
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
unsigned long macb_hz = macb->pclk_rate;
#else
unsigned long macb_hz = get_macb_pclk_rate(id);
#endif
if (macb_hz < 20000000)
config = MACB_BF(CLK, MACB_CLK_DIV8);
else if (macb_hz < 40000000)
config = MACB_BF(CLK, MACB_CLK_DIV16);
else if (macb_hz < 80000000)
config = MACB_BF(CLK, MACB_CLK_DIV32);
else
config = MACB_BF(CLK, MACB_CLK_DIV64);
return config;
}
static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
{
u32 config;
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
unsigned long macb_hz = macb->pclk_rate;
#else
unsigned long macb_hz = get_macb_pclk_rate(id);
#endif
if (macb_hz < 20000000)
config = GEM_BF(CLK, GEM_CLK_DIV8);
else if (macb_hz < 40000000)
config = GEM_BF(CLK, GEM_CLK_DIV16);
else if (macb_hz < 80000000)
config = GEM_BF(CLK, GEM_CLK_DIV32);
else if (macb_hz < 120000000)
config = GEM_BF(CLK, GEM_CLK_DIV48);
else if (macb_hz < 160000000)
config = GEM_BF(CLK, GEM_CLK_DIV64);
else if (macb_hz < 240000000)
config = GEM_BF(CLK, GEM_CLK_DIV96);
else if (macb_hz < 320000000)
config = GEM_BF(CLK, GEM_CLK_DIV128);
else
config = GEM_BF(CLK, GEM_CLK_DIV224);
return config;
}
/*
* Get the DMA bus width field of the network configuration register that we
* should program. We find the width from decoding the design configuration
* register to find the maximum supported data bus width.
*/
static u32 macb_dbw(struct macb_device *macb)
{
switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
case 4:
return GEM_BF(DBW, GEM_DBW128);
case 2:
return GEM_BF(DBW, GEM_DBW64);
case 1:
default:
return GEM_BF(DBW, GEM_DBW32);
}
}
static void _macb_eth_initialize(struct macb_device *macb)
{
int id = 0; /* This is not used by functions we call */
u32 ncfgr;
if (macb_is_gem(macb))
macb->rx_buffer_size = GEM_RX_BUFFER_SIZE;
else
macb->rx_buffer_size = MACB_RX_BUFFER_SIZE;
/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */
macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size *
MACB_RX_RING_SIZE,
&macb->rx_buffer_dma);
macb->rx_ring = dma_alloc_coherent(MACB_RX_DMA_DESC_SIZE,
&macb->rx_ring_dma);
macb->tx_ring = dma_alloc_coherent(MACB_TX_DMA_DESC_SIZE,
&macb->tx_ring_dma);
macb->dummy_desc = dma_alloc_coherent(MACB_TX_DUMMY_DMA_DESC_SIZE,
&macb->dummy_desc_dma);
/*
* Do some basic initialization so that we at least can talk
* to the PHY
*/
if (macb_is_gem(macb)) {
ncfgr = gem_mdc_clk_div(id, macb);
ncfgr |= macb_dbw(macb);
} else {
ncfgr = macb_mdc_clk_div(id, macb);
}
macb_writel(macb, NCFGR, ncfgr);
}
#ifndef CONFIG_DM_ETH
static int macb_send(struct eth_device *netdev, void *packet, int length)
{
struct macb_device *macb = to_macb(netdev);
return _macb_send(macb, netdev->name, packet, length);
}
static int macb_recv(struct eth_device *netdev)
{
struct macb_device *macb = to_macb(netdev);
uchar *packet;
int length;
macb->wrapped = false;
for (;;) {
macb->next_rx_tail = macb->rx_tail;
length = _macb_recv(macb, &packet);
if (length >= 0) {
net_process_received_packet(packet, length);
reclaim_rx_buffers(macb, macb->next_rx_tail);
} else {
return length;
}
}
}
static int macb_init(struct eth_device *netdev, bd_t *bd)
{
struct macb_device *macb = to_macb(netdev);
return _macb_init(macb, netdev->name);
}
static void macb_halt(struct eth_device *netdev)
{
struct macb_device *macb = to_macb(netdev);
return _macb_halt(macb);
}
static int macb_write_hwaddr(struct eth_device *netdev)
{
struct macb_device *macb = to_macb(netdev);
return _macb_write_hwaddr(macb, netdev->enetaddr);
}
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
{
struct macb_device *macb;
struct eth_device *netdev;
macb = malloc(sizeof(struct macb_device));
if (!macb) {
printf("Error: Failed to allocate memory for MACB%d\n", id);
return -1;
}
memset(macb, 0, sizeof(struct macb_device));
netdev = &macb->netdev;
macb->regs = regs;
macb->phy_addr = phy_addr;
if (macb_is_gem(macb))
sprintf(netdev->name, "gmac%d", id);
else
sprintf(netdev->name, "macb%d", id);
netdev->init = macb_init;
netdev->halt = macb_halt;
netdev->send = macb_send;
netdev->recv = macb_recv;
netdev->write_hwaddr = macb_write_hwaddr;
_macb_eth_initialize(macb);
eth_register(netdev);
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, netdev->name, MDIO_NAME_LEN);
mdiodev->read = macb_miiphy_read;
mdiodev->write = macb_miiphy_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
macb->bus = miiphy_get_dev_by_name(netdev->name);
#endif
return 0;
}
#endif /* !CONFIG_DM_ETH */
#ifdef CONFIG_DM_ETH
static int macb_start(struct udevice *dev)
{
return _macb_init(dev, dev->name);
}
static int macb_send(struct udevice *dev, void *packet, int length)
{
struct macb_device *macb = dev_get_priv(dev);
return _macb_send(macb, dev->name, packet, length);
}
static int macb_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct macb_device *macb = dev_get_priv(dev);
macb->next_rx_tail = macb->rx_tail;
macb->wrapped = false;
return _macb_recv(macb, packetp);
}
static int macb_free_pkt(struct udevice *dev, uchar *packet, int length)
{
struct macb_device *macb = dev_get_priv(dev);
reclaim_rx_buffers(macb, macb->next_rx_tail);
return 0;
}
static void macb_stop(struct udevice *dev)
{
struct macb_device *macb = dev_get_priv(dev);
_macb_halt(macb);
}
static int macb_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct macb_device *macb = dev_get_priv(dev);
return _macb_write_hwaddr(macb, plat->enetaddr);
}
static const struct eth_ops macb_eth_ops = {
.start = macb_start,
.send = macb_send,
.recv = macb_recv,
.stop = macb_stop,
.free_pkt = macb_free_pkt,
.write_hwaddr = macb_write_hwaddr,
};
#ifdef CONFIG_CLK
static int macb_enable_clk(struct udevice *dev)
{
struct macb_device *macb = dev_get_priv(dev);
struct clk clk;
ulong clk_rate;
int ret;
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return -EINVAL;
/*
* If clock driver didn't support enable or disable then
* we get -ENOSYS from clk_enable(). To handle this, we
* don't fail for ret == -ENOSYS.
*/
ret = clk_enable(&clk);
if (ret && ret != -ENOSYS)
return ret;
clk_rate = clk_get_rate(&clk);
if (!clk_rate)
return -EINVAL;
macb->pclk_rate = clk_rate;
return 0;
}
#endif
static const struct macb_config default_gem_config = {
.dma_burst_length = 16,
.clk_init = NULL,
};
static int macb_eth_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct macb_device *macb = dev_get_priv(dev);
const char *phy_mode;
int ret;
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
NULL);
if (phy_mode)
macb->phy_interface = phy_get_interface_by_name(phy_mode);
if (macb->phy_interface == -1) {
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
return -EINVAL;
}
macb->regs = (void *)pdata->iobase;
macb->is_big_endian = (cpu_to_be32(0x12345678) == 0x12345678);
macb->config = (struct macb_config *)dev_get_driver_data(dev);
if (!macb->config)
macb->config = &default_gem_config;
#ifdef CONFIG_CLK
ret = macb_enable_clk(dev);
if (ret)
return ret;
#endif
_macb_eth_initialize(macb);
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
macb->bus = mdio_alloc();
if (!macb->bus)
return -ENOMEM;
strncpy(macb->bus->name, dev->name, MDIO_NAME_LEN);
macb->bus->read = macb_miiphy_read;
macb->bus->write = macb_miiphy_write;
ret = mdio_register(macb->bus);
if (ret < 0)
return ret;
macb->bus = miiphy_get_dev_by_name(dev->name);
#endif
return 0;
}
static int macb_eth_remove(struct udevice *dev)
{
struct macb_device *macb = dev_get_priv(dev);
#ifdef CONFIG_PHYLIB
free(macb->phydev);
#endif
mdio_unregister(macb->bus);
mdio_free(macb->bus);
return 0;
}
/**
* macb_late_eth_ofdata_to_platdata
* @dev: udevice struct
* Returns 0 when operation success and negative errno number
* when operation failed.
*/
int __weak macb_late_eth_ofdata_to_platdata(struct udevice *dev)
{
return 0;
}
static int macb_eth_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
pdata->iobase = (phys_addr_t)dev_remap_addr(dev);
if (!pdata->iobase)
return -EINVAL;
return macb_late_eth_ofdata_to_platdata(dev);
}
static const struct macb_config sama5d4_config = {
.dma_burst_length = 4,
.clk_init = NULL,
};
static const struct macb_config sifive_config = {
.dma_burst_length = 16,
.clk_init = macb_sifive_clk_init,
};
static const struct udevice_id macb_eth_ids[] = {
{ .compatible = "cdns,macb" },
{ .compatible = "cdns,at91sam9260-macb" },
{ .compatible = "atmel,sama5d2-gem" },
{ .compatible = "atmel,sama5d3-gem" },
{ .compatible = "atmel,sama5d4-gem", .data = (ulong)&sama5d4_config },
{ .compatible = "cdns,zynq-gem" },
{ .compatible = "sifive,fu540-c000-gem",
.data = (ulong)&sifive_config },
{ }
};
U_BOOT_DRIVER(eth_macb) = {
.name = "eth_macb",
.id = UCLASS_ETH,
.of_match = macb_eth_ids,
.ofdata_to_platdata = macb_eth_ofdata_to_platdata,
.probe = macb_eth_probe,
.remove = macb_eth_remove,
.ops = &macb_eth_ops,
.priv_auto_alloc_size = sizeof(struct macb_device),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};
#endif
#endif