mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
H1 is a Google security chip present in recent Chromebooks, Pixel phones and other devices. Cr50 is the name of the software that runs on H1 in Chromebooks. This chip is used to handle TPM-like functionality and also has quite a few additional features. Add a driver for this. Signed-off-by: Simon Glass <sjg@chromium.org>
660 lines
14 KiB
C
660 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cr50 / H1 TPM support
|
|
*
|
|
* Copyright 2018 Google LLC
|
|
*/
|
|
|
|
#define LOG_CATEGORY UCLASS_TPM
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <irq.h>
|
|
#include <spl.h>
|
|
#include <tpm-v2.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/iomap.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
enum {
|
|
TIMEOUT_INIT_MS = 30000, /* Very long timeout for TPM init */
|
|
TIMEOUT_LONG_US = 2 * 1000 * 1000,
|
|
TIMEOUT_SHORT_US = 2 * 1000,
|
|
TIMEOUT_NO_IRQ_US = 20 * 1000,
|
|
TIMEOUT_IRQ_US = 100 * 1000,
|
|
};
|
|
|
|
enum {
|
|
CR50_DID_VID = 0x00281ae0L
|
|
};
|
|
|
|
enum {
|
|
CR50_MAX_BUF_SIZE = 63,
|
|
};
|
|
|
|
struct cr50_priv {
|
|
struct gpio_desc ready_gpio;
|
|
struct irq irq;
|
|
int locality;
|
|
uint vendor;
|
|
bool use_irq;
|
|
};
|
|
|
|
/* Wait for interrupt to indicate TPM is ready */
|
|
static int cr50_i2c_wait_tpm_ready(struct udevice *dev)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
ulong timeout, base;
|
|
int i;
|
|
|
|
if (!priv->use_irq && !dm_gpio_is_valid(&priv->ready_gpio)) {
|
|
/* Fixed delay if interrupt not supported */
|
|
udelay(TIMEOUT_NO_IRQ_US);
|
|
return 0;
|
|
}
|
|
|
|
base = timer_get_us();
|
|
timeout = base + TIMEOUT_IRQ_US;
|
|
|
|
i = 0;
|
|
while (priv->use_irq ? !irq_read_and_clear(&priv->irq) :
|
|
!dm_gpio_get_value(&priv->ready_gpio)) {
|
|
i++;
|
|
if ((int)(timer_get_us() - timeout) >= 0) {
|
|
log_warning("Timeout\n");
|
|
/* Use this instead of the -ETIMEDOUT used by i2c */
|
|
return -ETIME;
|
|
}
|
|
}
|
|
log_debug("i=%d\n", i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Clear pending interrupts */
|
|
static void cr50_i2c_clear_tpm_irq(struct udevice *dev)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
|
|
if (priv->use_irq)
|
|
irq_read_and_clear(&priv->irq);
|
|
}
|
|
|
|
/*
|
|
* cr50_i2c_read() - read from TPM register
|
|
*
|
|
* @dev: TPM chip information
|
|
* @addr: register address to read from
|
|
* @buffer: provided by caller
|
|
* @len: number of bytes to read
|
|
*
|
|
* 1) send register address byte 'addr' to the TPM
|
|
* 2) wait for TPM to indicate it is ready
|
|
* 3) read 'len' bytes of TPM response into the provided 'buffer'
|
|
*
|
|
* Return 0 on success. -ve on error
|
|
*/
|
|
static int cr50_i2c_read(struct udevice *dev, u8 addr, u8 *buffer,
|
|
size_t len)
|
|
{
|
|
int ret;
|
|
|
|
/* Clear interrupt before starting transaction */
|
|
cr50_i2c_clear_tpm_irq(dev);
|
|
|
|
/* Send the register address byte to the TPM */
|
|
ret = dm_i2c_write(dev, 0, &addr, 1);
|
|
if (ret) {
|
|
log_err("Address write failed (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for TPM to be ready with response data */
|
|
ret = cr50_i2c_wait_tpm_ready(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read response data frrom the TPM */
|
|
ret = dm_i2c_read(dev, 0, buffer, len);
|
|
if (ret) {
|
|
log_err("Read response failed (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* cr50_i2c_write() - write to TPM register
|
|
*
|
|
* @dev: TPM chip information
|
|
* @addr: register address to write to
|
|
* @buffer: data to write
|
|
* @len: number of bytes to write
|
|
*
|
|
* 1) prepend the provided address to the provided data
|
|
* 2) send the address+data to the TPM
|
|
* 3) wait for TPM to indicate it is done writing
|
|
*
|
|
* Returns -1 on error, 0 on success.
|
|
*/
|
|
static int cr50_i2c_write(struct udevice *dev, u8 addr, const u8 *buffer,
|
|
size_t len)
|
|
{
|
|
u8 buf[len + 1];
|
|
int ret;
|
|
|
|
if (len > CR50_MAX_BUF_SIZE) {
|
|
log_err("Length %zd is too large\n", len);
|
|
return -E2BIG;
|
|
}
|
|
|
|
/* Prepend the 'register address' to the buffer */
|
|
buf[0] = addr;
|
|
memcpy(buf + 1, buffer, len);
|
|
|
|
/* Clear interrupt before starting transaction */
|
|
cr50_i2c_clear_tpm_irq(dev);
|
|
|
|
/* Send write request buffer with address */
|
|
ret = dm_i2c_write(dev, 0, buf, len + 1);
|
|
if (ret) {
|
|
log_err("Error writing to TPM (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for TPM to be ready */
|
|
return cr50_i2c_wait_tpm_ready(dev);
|
|
}
|
|
|
|
static inline u8 tpm_access(u8 locality)
|
|
{
|
|
return 0x0 | (locality << 4);
|
|
}
|
|
|
|
static inline u8 tpm_sts(u8 locality)
|
|
{
|
|
return 0x1 | (locality << 4);
|
|
}
|
|
|
|
static inline u8 tpm_data_fifo(u8 locality)
|
|
{
|
|
return 0x5 | (locality << 4);
|
|
}
|
|
|
|
static inline u8 tpm_did_vid(u8 locality)
|
|
{
|
|
return 0x6 | (locality << 4);
|
|
}
|
|
|
|
static int release_locality(struct udevice *dev, int force)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_REQUEST_PENDING;
|
|
u8 addr = tpm_access(priv->locality);
|
|
int ret;
|
|
u8 buf;
|
|
|
|
ret = cr50_i2c_read(dev, addr, &buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (force || (buf & mask) == mask) {
|
|
buf = TPM_ACCESS_ACTIVE_LOCALITY;
|
|
cr50_i2c_write(dev, addr, &buf, 1);
|
|
}
|
|
|
|
priv->locality = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* cr50 requires all 4 bytes of status register to be read */
|
|
static int cr50_i2c_status(struct udevice *dev)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
u8 buf[4];
|
|
int ret;
|
|
|
|
ret = cr50_i2c_read(dev, tpm_sts(priv->locality), buf, sizeof(buf));
|
|
if (ret) {
|
|
log_warning("%s: Failed to read status\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return buf[0];
|
|
}
|
|
|
|
/* cr50 requires all 4 bytes of status register to be written */
|
|
static int cr50_i2c_ready(struct udevice *dev)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
u8 buf[4] = { TPM_STS_COMMAND_READY };
|
|
int ret;
|
|
|
|
ret = cr50_i2c_write(dev, tpm_sts(priv->locality), buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(TIMEOUT_SHORT_US);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cr50_i2c_wait_burststs(struct udevice *dev, u8 mask,
|
|
size_t *burst, int *status)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
ulong timeout;
|
|
u32 buf;
|
|
|
|
/*
|
|
* cr50 uses bytes 3:2 of status register for burst count and all 4
|
|
* bytes must be read
|
|
*/
|
|
timeout = timer_get_us() + TIMEOUT_LONG_US;
|
|
while (timer_get_us() < timeout) {
|
|
if (cr50_i2c_read(dev, tpm_sts(priv->locality),
|
|
(u8 *)&buf, sizeof(buf)) < 0) {
|
|
udelay(TIMEOUT_SHORT_US);
|
|
continue;
|
|
}
|
|
|
|
*status = buf & 0xff;
|
|
*burst = le16_to_cpu((buf >> 8) & 0xffff);
|
|
|
|
if ((*status & mask) == mask &&
|
|
*burst > 0 && *burst <= CR50_MAX_BUF_SIZE)
|
|
return 0;
|
|
|
|
udelay(TIMEOUT_SHORT_US);
|
|
}
|
|
|
|
log_warning("Timeout reading burst and status\n");
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int cr50_i2c_recv(struct udevice *dev, u8 *buf, size_t buf_len)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
size_t burstcnt, expected, current, len;
|
|
u8 addr = tpm_data_fifo(priv->locality);
|
|
u8 mask = TPM_STS_VALID | TPM_STS_DATA_AVAIL;
|
|
u32 expected_buf;
|
|
int status;
|
|
int ret;
|
|
|
|
log_debug("%s: len=%x\n", __func__, buf_len);
|
|
if (buf_len < TPM_HEADER_SIZE)
|
|
return -E2BIG;
|
|
|
|
ret = cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status);
|
|
if (ret < 0) {
|
|
log_warning("First chunk not available\n");
|
|
goto out_err;
|
|
}
|
|
|
|
/* Read first chunk of burstcnt bytes */
|
|
if (cr50_i2c_read(dev, addr, buf, burstcnt) < 0) {
|
|
log_warning("Read failed\n");
|
|
goto out_err;
|
|
}
|
|
|
|
/* Determine expected data in the return buffer */
|
|
memcpy(&expected_buf, buf + TPM_CMD_COUNT_OFFSET, sizeof(expected_buf));
|
|
expected = be32_to_cpu(expected_buf);
|
|
if (expected > buf_len) {
|
|
log_warning("Too much data: %zu > %zu\n", expected, buf_len);
|
|
goto out_err;
|
|
}
|
|
|
|
/* Now read the rest of the data */
|
|
current = burstcnt;
|
|
while (current < expected) {
|
|
/* Read updated burst count and check status */
|
|
if (cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status) < 0) {
|
|
log_warning("- burst failure1\n");
|
|
goto out_err;
|
|
}
|
|
|
|
len = min(burstcnt, expected - current);
|
|
if (cr50_i2c_read(dev, addr, buf + current, len) != 0) {
|
|
log_warning("Read failed\n");
|
|
goto out_err;
|
|
}
|
|
|
|
current += len;
|
|
}
|
|
|
|
if (cr50_i2c_wait_burststs(dev, TPM_STS_VALID, &burstcnt,
|
|
&status) < 0) {
|
|
log_warning("- burst failure2\n");
|
|
goto out_err;
|
|
}
|
|
if (status & TPM_STS_DATA_AVAIL) {
|
|
log_warning("Data still available\n");
|
|
goto out_err;
|
|
}
|
|
|
|
return current;
|
|
|
|
out_err:
|
|
/* Abort current transaction if still pending */
|
|
ret = cr50_i2c_status(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & TPM_STS_COMMAND_READY) {
|
|
ret = cr50_i2c_ready(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int cr50_i2c_send(struct udevice *dev, const u8 *buf, size_t len)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
|
|
int status;
|
|
size_t burstcnt, limit, sent = 0;
|
|
u8 tpm_go[4] = { TPM_STS_GO };
|
|
ulong timeout;
|
|
int ret;
|
|
|
|
log_debug("%s: len=%x\n", __func__, len);
|
|
timeout = timer_get_us() + TIMEOUT_LONG_US;
|
|
do {
|
|
ret = cr50_i2c_status(dev);
|
|
if (ret < 0)
|
|
goto out_err;
|
|
if (ret & TPM_STS_COMMAND_READY)
|
|
break;
|
|
|
|
if (timer_get_us() > timeout)
|
|
goto out_err;
|
|
|
|
ret = cr50_i2c_ready(dev);
|
|
if (ret)
|
|
goto out_err;
|
|
} while (1);
|
|
|
|
while (len > 0) {
|
|
u8 mask = TPM_STS_VALID;
|
|
|
|
/* Wait for data if this is not the first chunk */
|
|
if (sent > 0)
|
|
mask |= TPM_STS_DATA_EXPECT;
|
|
|
|
if (cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status) < 0)
|
|
goto out_err;
|
|
|
|
/*
|
|
* Use burstcnt - 1 to account for the address byte
|
|
* that is inserted by cr50_i2c_write()
|
|
*/
|
|
limit = min(burstcnt - 1, len);
|
|
if (cr50_i2c_write(dev, tpm_data_fifo(priv->locality),
|
|
&buf[sent], limit) != 0) {
|
|
log_warning("Write failed\n");
|
|
goto out_err;
|
|
}
|
|
|
|
sent += limit;
|
|
len -= limit;
|
|
}
|
|
|
|
/* Ensure TPM is not expecting more data */
|
|
if (cr50_i2c_wait_burststs(dev, TPM_STS_VALID, &burstcnt, &status) < 0)
|
|
goto out_err;
|
|
if (status & TPM_STS_DATA_EXPECT) {
|
|
log_warning("Data still expected\n");
|
|
goto out_err;
|
|
}
|
|
|
|
/* Start the TPM command */
|
|
ret = cr50_i2c_write(dev, tpm_sts(priv->locality), tpm_go,
|
|
sizeof(tpm_go));
|
|
if (ret) {
|
|
log_warning("Start command failed\n");
|
|
goto out_err;
|
|
}
|
|
|
|
return sent;
|
|
|
|
out_err:
|
|
/* Abort current transaction if still pending */
|
|
ret = cr50_i2c_status(dev);
|
|
|
|
if (ret < 0 || (ret & TPM_STS_COMMAND_READY)) {
|
|
ret = cr50_i2c_ready(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/**
|
|
* process_reset() - Wait for the Cr50 to reset
|
|
*
|
|
* Cr50 processes reset requests asynchronously and conceivably could be busy
|
|
* executing a long command and not reacting to the reset pulse for a while.
|
|
*
|
|
* This function will make sure that the AP does not proceed with boot until
|
|
* TPM finished reset processing.
|
|
*
|
|
* @dev: Cr50 device
|
|
* @return 0 if OK, -EPERM if locality could not be taken
|
|
*/
|
|
static int process_reset(struct udevice *dev)
|
|
{
|
|
const int loc = 0;
|
|
u8 access;
|
|
ulong start;
|
|
|
|
/*
|
|
* Locality is released by TPM reset.
|
|
*
|
|
* If locality is taken at this point, this could be due to the fact
|
|
* that the TPM is performing a long operation and has not processed
|
|
* reset request yet. We'll wait up to CR50_TIMEOUT_INIT_MS and see if
|
|
* it releases locality when reset is processed.
|
|
*/
|
|
start = get_timer(0);
|
|
do {
|
|
const u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY;
|
|
int ret;
|
|
|
|
ret = cr50_i2c_read(dev, tpm_access(loc),
|
|
&access, sizeof(access));
|
|
if (ret || ((access & mask) == mask)) {
|
|
/*
|
|
* Don't bombard the chip with traffic; let it keep
|
|
* processing the command.
|
|
*/
|
|
mdelay(2);
|
|
continue;
|
|
}
|
|
|
|
log_warning("TPM ready after %ld ms\n", get_timer(start));
|
|
|
|
return 0;
|
|
} while (get_timer(start) < TIMEOUT_INIT_MS);
|
|
|
|
log_warning("TPM failed to reset after %ld ms, status: %#x\n",
|
|
get_timer(start), access);
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
/*
|
|
* Locality could be already claimed (if this is a later U-Boot phase and the
|
|
* read-only U-Boot did not release it), or not yet claimed, if this is TPL or
|
|
* the older read-only U-Boot did release it.
|
|
*/
|
|
static int claim_locality(struct udevice *dev, int loc)
|
|
{
|
|
const u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY;
|
|
u8 access;
|
|
int ret;
|
|
|
|
ret = cr50_i2c_read(dev, tpm_access(loc), &access, sizeof(access));
|
|
if (ret)
|
|
return log_msg_ret("read1", ret);
|
|
|
|
if ((access & mask) == mask) {
|
|
log_warning("Locality already claimed\n");
|
|
return 0;
|
|
}
|
|
|
|
access = TPM_ACCESS_REQUEST_USE;
|
|
ret = cr50_i2c_write(dev, tpm_access(loc), &access, sizeof(access));
|
|
if (ret)
|
|
return log_msg_ret("write", ret);
|
|
|
|
ret = cr50_i2c_read(dev, tpm_access(loc), &access, sizeof(access));
|
|
if (ret)
|
|
return log_msg_ret("read2", ret);
|
|
|
|
if ((access & mask) != mask) {
|
|
log_err("Failed to claim locality\n");
|
|
return -EPERM;
|
|
}
|
|
log_info("Claimed locality %d\n", loc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cr50_i2c_get_desc(struct udevice *dev, char *buf, int size)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
|
|
return snprintf(buf, size, "cr50 TPM 2.0 (i2c %02x id %x) irq=%d",
|
|
chip->chip_addr, priv->vendor >> 16, priv->use_irq);
|
|
}
|
|
|
|
static int cr50_i2c_open(struct udevice *dev)
|
|
{
|
|
char buf[80];
|
|
int ret;
|
|
|
|
ret = process_reset(dev);
|
|
if (ret)
|
|
return log_msg_ret("reset", ret);
|
|
|
|
ret = claim_locality(dev, 0);
|
|
if (ret)
|
|
return log_msg_ret("claim", ret);
|
|
|
|
cr50_i2c_get_desc(dev, buf, sizeof(buf));
|
|
log_debug("%s\n", buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cr50_i2c_cleanup(struct udevice *dev)
|
|
{
|
|
release_locality(dev, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum {
|
|
TPM_TIMEOUT_MS = 5,
|
|
SHORT_TIMEOUT_MS = 750,
|
|
LONG_TIMEOUT_MS = 2000,
|
|
};
|
|
|
|
static int cr50_i2c_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct tpm_chip_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
struct irq irq;
|
|
int ret;
|
|
|
|
upriv->version = TPM_V2;
|
|
upriv->duration_ms[TPM_SHORT] = SHORT_TIMEOUT_MS;
|
|
upriv->duration_ms[TPM_MEDIUM] = LONG_TIMEOUT_MS;
|
|
upriv->duration_ms[TPM_LONG] = LONG_TIMEOUT_MS;
|
|
upriv->retry_time_ms = TPM_TIMEOUT_MS;
|
|
|
|
upriv->pcr_count = 32;
|
|
upriv->pcr_select_min = 2;
|
|
|
|
/* Optional GPIO to track when cr50 is ready */
|
|
ret = irq_get_by_index(dev, 0, &irq);
|
|
if (!ret) {
|
|
priv->irq = irq;
|
|
priv->use_irq = true;
|
|
} else {
|
|
ret = gpio_request_by_name(dev, "ready-gpio", 0,
|
|
&priv->ready_gpio, GPIOD_IS_IN);
|
|
if (ret) {
|
|
log_warning("Cr50 does not have an ready GPIO/interrupt (err=%d)\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cr50_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct cr50_priv *priv = dev_get_priv(dev);
|
|
u32 vendor = 0;
|
|
ulong start;
|
|
|
|
/*
|
|
* 150ms should be enough to synchronise with the TPM even under the
|
|
* worst nested-reset-request conditions. In the vast majority of cases
|
|
* there will be no wait at all.
|
|
*/
|
|
start = get_timer(0);
|
|
while (get_timer(start) < 150) {
|
|
int ret;
|
|
|
|
/* Exit once DID and VID verified */
|
|
ret = cr50_i2c_read(dev, tpm_did_vid(0), (u8 *)&vendor, 4);
|
|
if (!ret && vendor == CR50_DID_VID)
|
|
break;
|
|
|
|
/* TPM might be resetting; let's retry in a bit */
|
|
mdelay(10);
|
|
}
|
|
if (vendor != CR50_DID_VID) {
|
|
log_debug("DID_VID %08x not recognised\n", vendor);
|
|
return log_msg_ret("vendor-id", -EXDEV);
|
|
}
|
|
priv->vendor = vendor;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct tpm_ops cr50_i2c_ops = {
|
|
.open = cr50_i2c_open,
|
|
.get_desc = cr50_i2c_get_desc,
|
|
.send = cr50_i2c_send,
|
|
.recv = cr50_i2c_recv,
|
|
.cleanup = cr50_i2c_cleanup,
|
|
};
|
|
|
|
static const struct udevice_id cr50_i2c_ids[] = {
|
|
{ .compatible = "google,cr50" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(cr50_i2c) = {
|
|
.name = "cr50_i2c",
|
|
.id = UCLASS_TPM,
|
|
.of_match = cr50_i2c_ids,
|
|
.ops = &cr50_i2c_ops,
|
|
.ofdata_to_platdata = cr50_i2c_ofdata_to_platdata,
|
|
.probe = cr50_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct cr50_priv),
|
|
};
|