mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
At present we go through various contortions to store the I2C's chip address in its private data. This only exists when the chip is active so must be set up when it is probed. Until the device is probed we don't actually record what address it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the address when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
502 lines
12 KiB
C
502 lines
12 KiB
C
/*
|
|
* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
|
|
* Copyright (c) 2010-2011 NVIDIA Corporation
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/funcmux.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/tegra_i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum i2c_type {
|
|
TYPE_114,
|
|
TYPE_STD,
|
|
TYPE_DVC,
|
|
};
|
|
|
|
/* Information about i2c controller */
|
|
struct i2c_bus {
|
|
int id;
|
|
enum periph_id periph_id;
|
|
int speed;
|
|
int pinmux_config;
|
|
struct i2c_control *control;
|
|
struct i2c_ctlr *regs;
|
|
enum i2c_type type;
|
|
int inited; /* bus is inited */
|
|
};
|
|
|
|
static void set_packet_mode(struct i2c_bus *i2c_bus)
|
|
{
|
|
u32 config;
|
|
|
|
config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
|
|
|
|
if (i2c_bus->type == TYPE_DVC) {
|
|
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
|
|
|
|
writel(config, &dvc->cnfg);
|
|
} else {
|
|
writel(config, &i2c_bus->regs->cnfg);
|
|
/*
|
|
* program I2C_SL_CNFG.NEWSL to ENABLE. This fixes probe
|
|
* issues, i.e., some slaves may be wrongly detected.
|
|
*/
|
|
setbits_le32(&i2c_bus->regs->sl_cnfg, I2C_SL_CNFG_NEWSL_MASK);
|
|
}
|
|
}
|
|
|
|
static void i2c_reset_controller(struct i2c_bus *i2c_bus)
|
|
{
|
|
/* Reset I2C controller. */
|
|
reset_periph(i2c_bus->periph_id, 1);
|
|
|
|
/* re-program config register to packet mode */
|
|
set_packet_mode(i2c_bus);
|
|
}
|
|
|
|
static void i2c_init_controller(struct i2c_bus *i2c_bus)
|
|
{
|
|
if (!i2c_bus->speed)
|
|
return;
|
|
debug("%s: speed=%d\n", __func__, i2c_bus->speed);
|
|
/*
|
|
* Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
|
|
* here, in section 23.3.1, but in fact we seem to need a factor of
|
|
* 16 to get the right frequency.
|
|
*/
|
|
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
|
|
i2c_bus->speed * 2 * 8);
|
|
|
|
if (i2c_bus->type == TYPE_114) {
|
|
/*
|
|
* T114 I2C went to a single clock source for standard/fast and
|
|
* HS clock speeds. The new clock rate setting calculation is:
|
|
* SCL = CLK_SOURCE.I2C /
|
|
* (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) *
|
|
* I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1).
|
|
*
|
|
* NOTE: We do this here, after the initial clock/pll start,
|
|
* because if we read the clk_div reg before the controller
|
|
* is running, we hang, and we need it for the new calc.
|
|
*/
|
|
int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16;
|
|
debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
|
|
clk_div_stdfst_mode);
|
|
|
|
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
|
|
CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) *
|
|
i2c_bus->speed * 2);
|
|
}
|
|
|
|
/* Reset I2C controller. */
|
|
i2c_reset_controller(i2c_bus);
|
|
|
|
/* Configure I2C controller. */
|
|
if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */
|
|
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
|
|
|
|
setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
|
|
}
|
|
|
|
funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config);
|
|
}
|
|
|
|
static void send_packet_headers(
|
|
struct i2c_bus *i2c_bus,
|
|
struct i2c_trans_info *trans,
|
|
u32 packet_id,
|
|
bool end_with_repeated_start)
|
|
{
|
|
u32 data;
|
|
|
|
/* prepare header1: Header size = 0 Protocol = I2C, pktType = 0 */
|
|
data = PROTOCOL_TYPE_I2C << PKT_HDR1_PROTOCOL_SHIFT;
|
|
data |= packet_id << PKT_HDR1_PKT_ID_SHIFT;
|
|
data |= i2c_bus->id << PKT_HDR1_CTLR_ID_SHIFT;
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 1 sent (0x%x)\n", data);
|
|
|
|
/* prepare header2 */
|
|
data = (trans->num_bytes - 1) << PKT_HDR2_PAYLOAD_SIZE_SHIFT;
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 2 sent (0x%x)\n", data);
|
|
|
|
/* prepare IO specific header: configure the slave address */
|
|
data = trans->address << PKT_HDR3_SLAVE_ADDR_SHIFT;
|
|
|
|
/* Enable Read if it is not a write transaction */
|
|
if (!(trans->flags & I2C_IS_WRITE))
|
|
data |= PKT_HDR3_READ_MODE_MASK;
|
|
if (end_with_repeated_start)
|
|
data |= PKT_HDR3_REPEAT_START_MASK;
|
|
|
|
/* Write I2C specific header */
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 3 sent (0x%x)\n", data);
|
|
}
|
|
|
|
static int wait_for_tx_fifo_empty(struct i2c_control *control)
|
|
{
|
|
u32 count;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
count = (readl(&control->fifo_status) & TX_FIFO_EMPTY_CNT_MASK)
|
|
>> TX_FIFO_EMPTY_CNT_SHIFT;
|
|
if (count == I2C_FIFO_DEPTH)
|
|
return 1;
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_rx_fifo_notempty(struct i2c_control *control)
|
|
{
|
|
u32 count;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
count = (readl(&control->fifo_status) & TX_FIFO_FULL_CNT_MASK)
|
|
>> TX_FIFO_FULL_CNT_SHIFT;
|
|
if (count)
|
|
return 1;
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_transfer_complete(struct i2c_control *control)
|
|
{
|
|
int int_status;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
int_status = readl(&control->int_status);
|
|
if (int_status & I2C_INT_NO_ACK_MASK)
|
|
return -int_status;
|
|
if (int_status & I2C_INT_ARBITRATION_LOST_MASK)
|
|
return -int_status;
|
|
if (int_status & I2C_INT_XFER_COMPLETE_MASK)
|
|
return 0;
|
|
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int send_recv_packets(struct i2c_bus *i2c_bus,
|
|
struct i2c_trans_info *trans)
|
|
{
|
|
struct i2c_control *control = i2c_bus->control;
|
|
u32 int_status;
|
|
u32 words;
|
|
u8 *dptr;
|
|
u32 local;
|
|
uchar last_bytes;
|
|
int error = 0;
|
|
int is_write = trans->flags & I2C_IS_WRITE;
|
|
|
|
/* clear status from previous transaction, XFER_COMPLETE, NOACK, etc. */
|
|
int_status = readl(&control->int_status);
|
|
writel(int_status, &control->int_status);
|
|
|
|
send_packet_headers(i2c_bus, trans, 1,
|
|
trans->flags & I2C_USE_REPEATED_START);
|
|
|
|
words = DIV_ROUND_UP(trans->num_bytes, 4);
|
|
last_bytes = trans->num_bytes & 3;
|
|
dptr = trans->buf;
|
|
|
|
while (words) {
|
|
u32 *wptr = (u32 *)dptr;
|
|
|
|
if (is_write) {
|
|
/* deal with word alignment */
|
|
if ((words == 1) && last_bytes) {
|
|
local = 0;
|
|
memcpy(&local, dptr, last_bytes);
|
|
} else if ((unsigned)dptr & 3) {
|
|
memcpy(&local, dptr, sizeof(u32));
|
|
} else {
|
|
local = *wptr;
|
|
}
|
|
writel(local, &control->tx_fifo);
|
|
debug("pkt data sent (0x%x)\n", local);
|
|
if (!wait_for_tx_fifo_empty(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
} else {
|
|
if (!wait_for_rx_fifo_notempty(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
/*
|
|
* for the last word, we read into our local buffer,
|
|
* in case that caller did not provide enough buffer.
|
|
*/
|
|
local = readl(&control->rx_fifo);
|
|
if ((words == 1) && last_bytes)
|
|
memcpy(dptr, (char *)&local, last_bytes);
|
|
else if ((unsigned)dptr & 3)
|
|
memcpy(dptr, &local, sizeof(u32));
|
|
else
|
|
*wptr = local;
|
|
debug("pkt data received (0x%x)\n", local);
|
|
}
|
|
words--;
|
|
dptr += sizeof(u32);
|
|
}
|
|
|
|
if (wait_for_transfer_complete(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
return 0;
|
|
exit:
|
|
/* error, reset the controller. */
|
|
i2c_reset_controller(i2c_bus);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
|
|
u32 len, bool end_with_repeated_start)
|
|
{
|
|
int error;
|
|
struct i2c_trans_info trans_info;
|
|
|
|
trans_info.address = addr;
|
|
trans_info.buf = data;
|
|
trans_info.flags = I2C_IS_WRITE;
|
|
if (end_with_repeated_start)
|
|
trans_info.flags |= I2C_USE_REPEATED_START;
|
|
trans_info.num_bytes = len;
|
|
trans_info.is_10bit_address = 0;
|
|
|
|
error = send_recv_packets(i2c_bus, &trans_info);
|
|
if (error)
|
|
debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
|
|
u32 len)
|
|
{
|
|
int error;
|
|
struct i2c_trans_info trans_info;
|
|
|
|
trans_info.address = addr | 1;
|
|
trans_info.buf = data;
|
|
trans_info.flags = 0;
|
|
trans_info.num_bytes = len;
|
|
trans_info.is_10bit_address = 0;
|
|
|
|
error = send_recv_packets(i2c_bus, &trans_info);
|
|
if (error)
|
|
debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
|
|
i2c_bus->speed = speed;
|
|
i2c_init_controller(i2c_bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev->of_offset;
|
|
bool is_dvc;
|
|
|
|
i2c_bus->id = dev->seq;
|
|
i2c_bus->type = dev_get_of_data(dev);
|
|
i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
|
|
|
|
/*
|
|
* We don't have a binding for pinmux yet. Leave it out for now. So
|
|
* far no one needs anything other than the default.
|
|
*/
|
|
i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
|
|
i2c_bus->periph_id = clock_decode_periph_id(blob, node);
|
|
|
|
/*
|
|
* We can't specify the pinmux config in the fdt, so I2C2 will not
|
|
* work on Seaboard. It normally has no devices on it anyway.
|
|
* You could add in this little hack if you need to use it.
|
|
* The correct solution is a pinmux binding in the fdt.
|
|
*
|
|
* if (i2c_bus->periph_id == PERIPH_ID_I2C2)
|
|
* i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
|
|
*/
|
|
if (i2c_bus->periph_id == -1)
|
|
return -EINVAL;
|
|
|
|
is_dvc = dev_get_of_data(dev) == TYPE_DVC;
|
|
if (is_dvc) {
|
|
i2c_bus->control =
|
|
&((struct dvc_ctlr *)i2c_bus->regs)->control;
|
|
} else {
|
|
i2c_bus->control = &i2c_bus->regs->control;
|
|
}
|
|
i2c_init_controller(i2c_bus);
|
|
debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
|
|
is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
|
|
i2c_bus->periph_id, i2c_bus->speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* i2c write version without the register address */
|
|
static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
|
|
int len, bool end_with_repeated_start)
|
|
{
|
|
int rc;
|
|
|
|
debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
|
|
debug("write_data: ");
|
|
/* use rc for counter */
|
|
for (rc = 0; rc < len; ++rc)
|
|
debug(" 0x%02x", buffer[rc]);
|
|
debug("\n");
|
|
|
|
/* Shift 7-bit address over for lower-level i2c functions */
|
|
rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
|
|
end_with_repeated_start);
|
|
if (rc)
|
|
debug("i2c_write_data(): rc=%d\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* i2c read version without the register address */
|
|
static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
|
|
int len)
|
|
{
|
|
int rc;
|
|
|
|
debug("inside i2c_read_data():\n");
|
|
/* Shift 7-bit address over for lower-level i2c functions */
|
|
rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
|
|
if (rc) {
|
|
debug("i2c_read_data(): rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
debug("i2c_read_data: ");
|
|
/* reuse rc for counter*/
|
|
for (rc = 0; rc < len; ++rc)
|
|
debug(" 0x%02x", buffer[rc]);
|
|
debug("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Probe to see if a chip is present. */
|
|
static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
|
|
uint chip_flags)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
int rc;
|
|
u8 reg;
|
|
|
|
/* Shift 7-bit address over for lower-level i2c functions */
|
|
rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, ®, sizeof(reg),
|
|
false);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
struct i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("i2c_xfer: %d messages\n", nmsgs);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
|
|
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD) {
|
|
ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
|
|
msg->len);
|
|
} else {
|
|
ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
|
|
msg->len, next_is_read);
|
|
}
|
|
if (ret) {
|
|
debug("i2c_write: error sending\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_i2c_get_dvc_bus(struct udevice **busp)
|
|
{
|
|
struct udevice *bus;
|
|
|
|
for (uclass_first_device(UCLASS_I2C, &bus);
|
|
bus;
|
|
uclass_next_device(&bus)) {
|
|
if (dev_get_of_data(bus) == TYPE_DVC) {
|
|
*busp = bus;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static const struct dm_i2c_ops tegra_i2c_ops = {
|
|
.xfer = tegra_i2c_xfer,
|
|
.probe_chip = tegra_i2c_probe_chip,
|
|
.set_bus_speed = tegra_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id tegra_i2c_ids[] = {
|
|
{ .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
|
|
{ .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
|
|
{ .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_tegra) = {
|
|
.name = "i2c_tegra",
|
|
.id = UCLASS_I2C,
|
|
.of_match = tegra_i2c_ids,
|
|
.probe = tegra_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct i2c_bus),
|
|
.ops = &tegra_i2c_ops,
|
|
};
|