u-boot-brain/arch
Prabhakar Kushwaha 35fe948e3b powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
The BSC9132 is a highly integrated device that targets the evolving
 Microcell, Picocell, and Enterprise-Femto base station market subsegments.

 The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
 core technologies with MAPLE-B2P baseband acceleration processing elements
 to address the need for a high performance, low cost, integrated solution
 that handles all required processing layers without the need for an
 external device except for an RF transceiver or, in a Micro base station
 configuration, a host device that handles the L3/L4 and handover between
 sectors.

 The BSC9132 SoC includes the following function and features:
    - Power Architecture subsystem including two e500 processors with
	512-Kbyte shared L2 cache
    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
	cache
    - 32 Kbyte of shared M3 memory
    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
      Processing (MAPLE-B2P)
    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
      ECC), up to 1333 MHz data rate
    - Dedicated security engine featuring trusted boot
    - Two DMA controllers
         - OCNDMA with four bidirectional channels
         - SysDMA with sixteen bidirectional channels
    - Interfaces
        - Four-lane SerDes PHY
	    - PCI Express controller complies with the PEX Specification-Rev 2.0
        - Two Common Public Radio Interface (CPRI) controller lanes
	    - High-speed USB 2.0 host and device controller with ULPI interface
        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
	    - Antenna interface controller (AIC), supporting four industry
		standard JESD207/four custom ADI RF interfaces
       - ADI lanes support both full duplex FDD support & half duplex TDD
       - Universal Subscriber Identity Module (USIM) interface that
	   facilitates communication to SIM cards or Eurochip pre-paid phone
	   cards
       - Two DUART, two eSPI, and two I2C controllers
       - Integrated Flash memory controller (IFC)
       - GPIO
     - Sixteen 32-bit timers

Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:14 -06:00
..
arm pxa: Save lr register in relocate_code function 2013-01-14 16:22:00 -07:00
avr32 common: Discard the __u_boot_cmd section 2012-10-22 08:29:42 -07:00
blackfin common: Discard the __u_boot_cmd section 2012-10-22 08:29:42 -07:00
m68k m68k/lib: fix serial driver relocation 2013-01-11 14:41:14 -07:00
microblaze env: Use getenv_yesno() more generally 2012-12-13 11:46:55 -07:00
mips MIPS: bootm.c: add support for 'prep' and 'go' subcommands 2013-01-16 10:52:07 +01:00
nds32 common: Discard the __u_boot_cmd section 2012-10-22 08:29:42 -07:00
nios2 nios2: remove asm/status_led.h 2012-11-10 19:45:58 +08:00
openrisc openrisc: Change bi_baudrate and global data baudrate to int 2012-10-19 15:25:45 -07:00
powerpc powerpc/mpc85xx: Add BSC9132/BSC9232 processor support 2013-01-30 11:25:14 -06:00
sandbox common: Discard the __u_boot_cmd section 2012-10-22 08:29:42 -07:00
sh sh: add support for sh7752evb board 2012-12-20 13:20:17 +09:00
sparc env: Use getenv_yesno() more generally 2012-12-13 11:46:55 -07:00
x86 x86: Build vga video code only if CONFIG_VIDEO_VGA is defined 2012-12-06 14:30:44 -08:00
.gitignore update include/asm/ gitignore after move 2010-05-07 00:17:30 +02:00