mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 05:18:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
1060 lines
27 KiB
C
1060 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2007-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2003 Motorola Inc.
|
|
* Modified by Xianghua Xiao, X.Xiao@motorola.com
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <watchdog.h>
|
|
#include <asm/processor.h>
|
|
#include <ioports.h>
|
|
#include <sata.h>
|
|
#include <fm_eth.h>
|
|
#include <asm/io.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
#include <fsl_errata.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_srio.h>
|
|
#ifdef CONFIG_FSL_CORENET
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fsl_qbman.h>
|
|
#endif
|
|
#include <fsl_usb.h>
|
|
#include <hwconfig.h>
|
|
#include <linux/compiler.h>
|
|
#include "mp.h"
|
|
#ifdef CONFIG_CHAIN_OF_TRUST
|
|
#include <fsl_validate.h>
|
|
#endif
|
|
#ifdef CONFIG_FSL_CAAM
|
|
#include <fsl_sec.h>
|
|
#endif
|
|
#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
|
|
#include <asm/fsl_pamu.h>
|
|
#include <fsl_secboot_err.h>
|
|
#endif
|
|
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
|
|
#include <nand.h>
|
|
#include <errno.h>
|
|
#endif
|
|
#ifndef CONFIG_ARCH_QEMU_E500
|
|
#include <fsl_ddr.h>
|
|
#endif
|
|
#include "../../../../drivers/ata/fsl_sata.h"
|
|
#ifdef CONFIG_U_QE
|
|
#include <fsl_qe.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
|
|
/*
|
|
* For deriving usb clock from 100MHz sysclk, reference divisor is set
|
|
* to a value of 5, which gives an intermediate value 20(100/5). The
|
|
* multiplication factor integer is set to 24, which when multiplied to
|
|
* above intermediate value provides clock for usb ip.
|
|
*/
|
|
void usb_single_source_clk_configure(struct ccsr_usb_phy *usb_phy)
|
|
{
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
if (sysinfo.diff_sysclk == 1) {
|
|
clrbits_be32(&usb_phy->pllprg[1],
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_MFI);
|
|
setbits_be32(&usb_phy->pllprg[1],
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK |
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK |
|
|
CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
|
|
void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
|
|
u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
|
|
|
|
/* Increase Disconnect Threshold by 50mV */
|
|
xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
|
|
INC_DCNT_THRESHOLD_50MV;
|
|
/* Enable programming of USB High speed Disconnect threshold */
|
|
xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
|
|
out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
|
|
|
|
xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
|
|
/* Increase Disconnect Threshold by 50mV */
|
|
xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
|
|
INC_DCNT_THRESHOLD_50MV;
|
|
/* Enable programming of USB High speed Disconnect threshold */
|
|
xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
|
|
out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
|
|
#else
|
|
|
|
u32 temp = 0;
|
|
u32 status = in_be32(&usb_phy->status1);
|
|
|
|
u32 squelch_prog_rd_0_2 =
|
|
(status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
|
|
& CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
|
|
|
|
u32 squelch_prog_rd_3_5 =
|
|
(status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
|
|
& CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
|
|
|
|
setbits_be32(&usb_phy->config1,
|
|
CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
|
|
setbits_be32(&usb_phy->config2,
|
|
CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
|
|
|
|
temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
|
|
out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
|
|
|
|
temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
|
|
out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
|
|
extern qe_iop_conf_t qe_iop_conf_tab[];
|
|
extern void qe_config_iopin(u8 port, u8 pin, int dir,
|
|
int open_drain, int assign);
|
|
extern void qe_init(uint qe_base);
|
|
extern void qe_reset(void);
|
|
|
|
static void config_qe_ioports(void)
|
|
{
|
|
u8 port, pin;
|
|
int dir, open_drain, assign;
|
|
int i;
|
|
|
|
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
|
|
port = qe_iop_conf_tab[i].port;
|
|
pin = qe_iop_conf_tab[i].pin;
|
|
dir = qe_iop_conf_tab[i].dir;
|
|
open_drain = qe_iop_conf_tab[i].open_drain;
|
|
assign = qe_iop_conf_tab[i].assign;
|
|
qe_config_iopin(port, pin, dir, open_drain, assign);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
void config_8560_ioports (volatile ccsr_cpm_t * cpm)
|
|
{
|
|
int portnum;
|
|
|
|
for (portnum = 0; portnum < 4; portnum++) {
|
|
uint pmsk = 0,
|
|
ppar = 0,
|
|
psor = 0,
|
|
pdir = 0,
|
|
podr = 0,
|
|
pdat = 0;
|
|
iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
|
|
iop_conf_t *eiopc = iopc + 32;
|
|
uint msk = 1;
|
|
|
|
/*
|
|
* NOTE:
|
|
* index 0 refers to pin 31,
|
|
* index 31 refers to pin 0
|
|
*/
|
|
while (iopc < eiopc) {
|
|
if (iopc->conf) {
|
|
pmsk |= msk;
|
|
if (iopc->ppar)
|
|
ppar |= msk;
|
|
if (iopc->psor)
|
|
psor |= msk;
|
|
if (iopc->pdir)
|
|
pdir |= msk;
|
|
if (iopc->podr)
|
|
podr |= msk;
|
|
if (iopc->pdat)
|
|
pdat |= msk;
|
|
}
|
|
|
|
msk <<= 1;
|
|
iopc++;
|
|
}
|
|
|
|
if (pmsk != 0) {
|
|
volatile ioport_t *iop = ioport_addr (cpm, portnum);
|
|
uint tpmsk = ~pmsk;
|
|
|
|
/*
|
|
* the (somewhat confused) paragraph at the
|
|
* bottom of page 35-5 warns that there might
|
|
* be "unknown behaviour" when programming
|
|
* PSORx and PDIRx, if PPARx = 1, so I
|
|
* decided this meant I had to disable the
|
|
* dedicated function first, and enable it
|
|
* last.
|
|
*/
|
|
iop->ppar &= tpmsk;
|
|
iop->psor = (iop->psor & tpmsk) | psor;
|
|
iop->podr = (iop->podr & tpmsk) | podr;
|
|
iop->pdat = (iop->pdat & tpmsk) | pdat;
|
|
iop->pdir = (iop->pdir & tpmsk) | pdir;
|
|
iop->ppar |= ppar;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_CPC
|
|
#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
|
|
void disable_cpc_sram(void)
|
|
{
|
|
int i;
|
|
|
|
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
|
|
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
|
|
/* find and disable LAW of SRAM */
|
|
struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
|
|
|
|
if (law.index == -1) {
|
|
printf("\nFatal error happened\n");
|
|
return;
|
|
}
|
|
disable_law(law.index);
|
|
|
|
clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
|
|
out_be32(&cpc->cpccsr0, 0);
|
|
out_be32(&cpc->cpcsrcr0, 0);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
|
|
#ifdef CONFIG_POST
|
|
#error POST memory test cannot be enabled with TDM
|
|
#endif
|
|
static void enable_tdm_law(void)
|
|
{
|
|
int ret;
|
|
char buffer[HWCONFIG_BUFFER_SIZE] = {0};
|
|
int tdm_hwconfig_enabled = 0;
|
|
|
|
/*
|
|
* Extract hwconfig from environment since environment
|
|
* is not setup properly yet. Search for tdm entry in
|
|
* hwconfig.
|
|
*/
|
|
ret = env_get_f("hwconfig", buffer, sizeof(buffer));
|
|
if (ret > 0) {
|
|
tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
|
|
/* If tdm is defined in hwconfig, set law for tdm workaround */
|
|
if (tdm_hwconfig_enabled)
|
|
set_next_law(T1040_TDM_QUIRK_CCSR_BASE, LAW_SIZE_16M,
|
|
LAW_TRGT_IF_CCSR);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void enable_cpc(void)
|
|
{
|
|
int i;
|
|
int ret;
|
|
u32 size = 0;
|
|
u32 cpccfg0;
|
|
char buffer[HWCONFIG_BUFFER_SIZE];
|
|
char cpc_subarg[16];
|
|
bool have_hwconfig = false;
|
|
int cpc_args = 0;
|
|
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
|
|
/* Extract hwconfig from environment */
|
|
ret = env_get_f("hwconfig", buffer, sizeof(buffer));
|
|
if (ret > 0) {
|
|
/*
|
|
* If "en_cpc" is not defined in hwconfig then by default all
|
|
* cpcs are enable. If this config is defined then individual
|
|
* cpcs which have to be enabled should also be defined.
|
|
* e.g en_cpc:cpc1,cpc2;
|
|
*/
|
|
if (hwconfig_f("en_cpc", buffer))
|
|
have_hwconfig = true;
|
|
}
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
|
|
if (have_hwconfig) {
|
|
sprintf(cpc_subarg, "cpc%u", i + 1);
|
|
cpc_args = hwconfig_sub_f("en_cpc", cpc_subarg, buffer);
|
|
if (cpc_args == 0)
|
|
continue;
|
|
}
|
|
cpccfg0 = in_be32(&cpc->cpccfg0);
|
|
size += CPC_CFG0_SZ_K(cpccfg0);
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
|
|
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
|
|
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
|
|
setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
|
|
if (has_erratum_a006379()) {
|
|
setbits_be32(&cpc->cpchdbcr0,
|
|
CPC_HDBCR0_SPLRU_LEVEL_EN);
|
|
}
|
|
#endif
|
|
|
|
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
|
|
/* Read back to sync write */
|
|
in_be32(&cpc->cpccsr0);
|
|
|
|
}
|
|
|
|
puts("Corenet Platform Cache: ");
|
|
print_size(size * 1024, " enabled\n");
|
|
}
|
|
|
|
static void invalidate_cpc(void)
|
|
{
|
|
int i;
|
|
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
|
|
/* skip CPC when it used as all SRAM */
|
|
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
|
|
continue;
|
|
/* Flash invalidate the CPC and clear all the locks */
|
|
out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
|
|
while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
|
|
;
|
|
}
|
|
}
|
|
#else
|
|
#define enable_cpc()
|
|
#define invalidate_cpc()
|
|
#define disable_cpc_sram()
|
|
#endif /* CONFIG_SYS_FSL_CPC */
|
|
|
|
/*
|
|
* Breathe some life into the CPU...
|
|
*
|
|
* Set up the memory map
|
|
* initialize a bunch of registers
|
|
*/
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
static void corenet_tb_init(void)
|
|
{
|
|
volatile ccsr_rcpm_t *rcpm =
|
|
(void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
|
|
volatile ccsr_pic_t *pic =
|
|
(void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
|
|
u32 whoami = in_be32(&pic->whoami);
|
|
|
|
/* Enable the timebase register for this core */
|
|
out_be32(&rcpm->ctbenrl, (1 << whoami));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
|
|
void fsl_erratum_a007212_workaround(void)
|
|
{
|
|
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 ddr_pll_ratio;
|
|
u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
|
|
u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28);
|
|
u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
|
|
u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40);
|
|
u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
|
|
u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60);
|
|
u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68);
|
|
#endif
|
|
#endif
|
|
/*
|
|
* Even this workaround applies to selected version of SoCs, it is
|
|
* safe to apply to all versions, with the limitation of odd ratios.
|
|
* If RCW has disabled DDR PLL, we have to apply this workaround,
|
|
* otherwise DDR will not work.
|
|
*/
|
|
ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
|
|
FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) &
|
|
FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
|
|
/* check if RCW sets ratio to 0, required by this workaround */
|
|
if (ddr_pll_ratio != 0)
|
|
return;
|
|
ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
|
|
FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
|
|
FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
|
|
/* check if reserved bits have the desired ratio */
|
|
if (ddr_pll_ratio == 0) {
|
|
printf("Error: Unknown DDR PLL ratio!\n");
|
|
return;
|
|
}
|
|
ddr_pll_ratio >>= 1;
|
|
|
|
setbits_be32(plldadcr1, 0x02000001);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
|
|
setbits_be32(plldadcr2, 0x02000001);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
|
|
setbits_be32(plldadcr3, 0x02000001);
|
|
#endif
|
|
#endif
|
|
setbits_be32(dpdovrcr4, 0xe0000000);
|
|
out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
|
|
out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
|
|
out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
|
|
#endif
|
|
#endif
|
|
udelay(100);
|
|
clrbits_be32(plldadcr1, 0x02000001);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
|
|
clrbits_be32(plldadcr2, 0x02000001);
|
|
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
|
|
clrbits_be32(plldadcr3, 0x02000001);
|
|
#endif
|
|
#endif
|
|
clrbits_be32(dpdovrcr4, 0xe0000000);
|
|
}
|
|
#endif
|
|
|
|
ulong cpu_init_f(void)
|
|
{
|
|
extern void m8560_cpm_reset (void);
|
|
#ifdef CONFIG_SYS_DCSRBAR_PHYS
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
#endif
|
|
#if defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SYS_RAMBOOT)
|
|
struct law_entry law;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_MPC8548
|
|
ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
uint svr = get_svr();
|
|
|
|
/*
|
|
* CPU2 errata workaround: A core hang possible while executing
|
|
* a msync instruction and a snoopable transaction from an I/O
|
|
* master tagged to make quick forward progress is present.
|
|
* Fixed in silicon rev 2.1.
|
|
*/
|
|
if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
|
|
out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
|
|
#endif
|
|
|
|
disable_tlb(14);
|
|
disable_tlb(15);
|
|
|
|
#if defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SYS_RAMBOOT)
|
|
/* Disable the LAW created for NOR flash by the PBI commands */
|
|
law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
|
|
if (law.index != -1)
|
|
disable_law(law.index);
|
|
|
|
#if defined(CONFIG_SYS_CPC_REINIT_F)
|
|
disable_cpc_sram();
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
|
|
#endif
|
|
|
|
init_early_memctl_regs();
|
|
|
|
#if defined(CONFIG_CPM2)
|
|
m8560_cpm_reset();
|
|
#endif
|
|
|
|
#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
|
|
/* Config QE ioports */
|
|
config_qe_ioports();
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_DMA)
|
|
dma_init();
|
|
#endif
|
|
#ifdef CONFIG_FSL_CORENET
|
|
corenet_tb_init();
|
|
#endif
|
|
init_used_tlb_cams();
|
|
|
|
/* Invalidate the CPC before DDR gets enabled */
|
|
invalidate_cpc();
|
|
|
|
#ifdef CONFIG_SYS_DCSRBAR_PHYS
|
|
/* set DCSRCR so that DCSR space is 1G */
|
|
setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
|
|
in_be32(&gur->dcsrcr);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
|
|
fsl_erratum_a007212_workaround();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Implement a dummy function for those platforms w/o SERDES */
|
|
static void __fsl_serdes__init(void)
|
|
{
|
|
return ;
|
|
}
|
|
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
|
|
|
|
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
|
|
int enable_cluster_l2(void)
|
|
{
|
|
int i = 0;
|
|
u32 cluster, svr = get_svr();
|
|
ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
struct ccsr_cluster_l2 __iomem *l2cache;
|
|
|
|
/* only the L2 of first cluster should be enabled as expected on T4080,
|
|
* but there is no EOC in the first cluster as HW sake, so return here
|
|
* to skip enabling L2 cache of the 2nd cluster.
|
|
*/
|
|
if (SVR_SOC_VER(svr) == SVR_T4080)
|
|
return 0;
|
|
|
|
cluster = in_be32(&gur->tp_cluster[i].lower);
|
|
if (cluster & TP_CLUSTER_EOC)
|
|
return 0;
|
|
|
|
/* The first cache has already been set up, so skip it */
|
|
i++;
|
|
|
|
/* Look through the remaining clusters, and set up their caches */
|
|
do {
|
|
int j, cluster_valid = 0;
|
|
|
|
l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
|
|
|
|
cluster = in_be32(&gur->tp_cluster[i].lower);
|
|
|
|
/* check that at least one core/accel is enabled in cluster */
|
|
for (j = 0; j < 4; j++) {
|
|
u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
|
|
u32 type = in_be32(&gur->tp_ityp[idx]);
|
|
|
|
if ((type & TP_ITYP_AV) &&
|
|
TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
|
|
cluster_valid = 1;
|
|
}
|
|
|
|
if (cluster_valid) {
|
|
/* set stash ID to (cluster) * 2 + 32 + 1 */
|
|
clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
|
|
|
|
printf("enable l2 for cluster %d %p\n", i, l2cache);
|
|
|
|
out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
|
|
while ((in_be32(&l2cache->l2csr0)
|
|
& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
|
|
;
|
|
out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
|
|
}
|
|
i++;
|
|
} while (!(cluster & TP_CLUSTER_EOC));
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Initialize L2 as cache.
|
|
*/
|
|
int l2cache_init(void)
|
|
{
|
|
__maybe_unused u32 svr = get_svr();
|
|
#ifdef CONFIG_L2_CACHE
|
|
ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
|
|
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
|
|
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
|
|
#endif
|
|
|
|
puts ("L2: ");
|
|
|
|
#if defined(CONFIG_L2_CACHE)
|
|
volatile uint cache_ctl;
|
|
uint ver;
|
|
u32 l2siz_field;
|
|
|
|
ver = SVR_SOC_VER(svr);
|
|
|
|
asm("msync;isync");
|
|
cache_ctl = l2cache->l2ctl;
|
|
|
|
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
|
|
if (cache_ctl & MPC85xx_L2CTL_L2E) {
|
|
/* Clear L2 SRAM memory-mapped base address */
|
|
out_be32(&l2cache->l2srbar0, 0x0);
|
|
out_be32(&l2cache->l2srbar1, 0x0);
|
|
|
|
/* set MBECCDIS=0, SBECCDIS=0 */
|
|
clrbits_be32(&l2cache->l2errdis,
|
|
(MPC85xx_L2ERRDIS_MBECC |
|
|
MPC85xx_L2ERRDIS_SBECC));
|
|
|
|
/* set L2E=0, L2SRAM=0 */
|
|
clrbits_be32(&l2cache->l2ctl,
|
|
(MPC85xx_L2CTL_L2E |
|
|
MPC85xx_L2CTL_L2SRAM_ENTIRE));
|
|
}
|
|
#endif
|
|
|
|
l2siz_field = (cache_ctl >> 28) & 0x3;
|
|
|
|
switch (l2siz_field) {
|
|
case 0x0:
|
|
printf(" unknown size (0x%08x)\n", cache_ctl);
|
|
return -1;
|
|
break;
|
|
case 0x1:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8555) {
|
|
puts("128 KiB ");
|
|
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
|
|
cache_ctl = 0xc4000000;
|
|
} else {
|
|
puts("256 KiB ");
|
|
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
}
|
|
break;
|
|
case 0x2:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8555) {
|
|
puts("256 KiB ");
|
|
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
|
|
cache_ctl = 0xc8000000;
|
|
} else {
|
|
puts("512 KiB ");
|
|
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
cache_ctl = 0xc0000000;
|
|
}
|
|
break;
|
|
case 0x3:
|
|
puts("1024 KiB ");
|
|
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
cache_ctl = 0xc0000000;
|
|
break;
|
|
}
|
|
|
|
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
|
|
puts("already enabled");
|
|
#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
|
|
u32 l2srbar = l2cache->l2srbar0;
|
|
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
|
|
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
|
|
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
|
|
l2cache->l2srbar0 = l2srbar;
|
|
printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
|
|
}
|
|
#endif /* CONFIG_SYS_INIT_L2_ADDR */
|
|
puts("\n");
|
|
} else {
|
|
asm("msync;isync");
|
|
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
|
|
asm("msync;isync");
|
|
puts("enabled\n");
|
|
}
|
|
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
|
|
if (SVR_SOC_VER(svr) == SVR_P2040) {
|
|
puts("N/A\n");
|
|
goto skip_l2;
|
|
}
|
|
|
|
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
|
|
|
|
/* invalidate the L2 cache */
|
|
mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
|
|
while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
|
|
;
|
|
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
/* set stash id to (coreID) * 2 + 32 + L2 (1) */
|
|
mtspr(SPRN_L2CSR1, (32 + 1));
|
|
#endif
|
|
|
|
/* enable the cache */
|
|
mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
|
|
|
|
if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
|
|
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
|
|
;
|
|
print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
|
|
}
|
|
|
|
skip_l2:
|
|
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
|
|
if (l2cache->l2csr0 & L2CSR0_L2E)
|
|
print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
|
|
" enabled\n");
|
|
|
|
enable_cluster_l2();
|
|
#else
|
|
puts("disabled\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
*
|
|
* The newer 8548, etc, parts have twice as much cache, but
|
|
* use the same bit-encoding as the older 8555, etc, parts.
|
|
*
|
|
*/
|
|
int cpu_init_r(void)
|
|
{
|
|
__maybe_unused u32 svr = get_svr();
|
|
#ifdef CONFIG_SYS_LBC_LCRR
|
|
fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
|
|
#endif
|
|
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
|
|
extern int spin_table_compat;
|
|
const char *spin;
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
|
|
ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
|
|
#endif
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
|
|
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
|
|
/*
|
|
* CPU22 and NMG_CPU_A011 share the same workaround.
|
|
* CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
|
|
* NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
|
|
* also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
|
|
* fixed in 2.0. NMG_CPU_A011 is activated by default and can
|
|
* be disabled by hwconfig with syntax:
|
|
*
|
|
* fsl_cpu_a011:disable
|
|
*/
|
|
extern int enable_cpu_a011_workaround;
|
|
#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
|
|
enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
|
|
#else
|
|
char buffer[HWCONFIG_BUFFER_SIZE];
|
|
char *buf = NULL;
|
|
int n, res;
|
|
|
|
n = env_get_f("hwconfig", buffer, sizeof(buffer));
|
|
if (n > 0)
|
|
buf = buffer;
|
|
|
|
res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
|
|
if (res > 0) {
|
|
enable_cpu_a011_workaround = 0;
|
|
} else {
|
|
if (n >= HWCONFIG_BUFFER_SIZE) {
|
|
printf("fsl_cpu_a011 was not found. hwconfig variable "
|
|
"may be too long\n");
|
|
}
|
|
enable_cpu_a011_workaround =
|
|
(SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
|
|
(SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
|
|
}
|
|
#endif
|
|
if (enable_cpu_a011_workaround) {
|
|
flush_dcache();
|
|
mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
|
|
sync();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007907
|
|
flush_dcache();
|
|
mtspr(L1CSR2, (mfspr(L1CSR2) & ~L1CSR2_DCSTASHID));
|
|
sync();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
|
|
/*
|
|
* A-005812 workaround sets bit 32 of SPR 976 for SoCs running
|
|
* in write shadow mode. Checking DCWS before setting SPR 976.
|
|
*/
|
|
if (mfspr(L1CSR2) & L1CSR2_DCWS)
|
|
mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
|
|
#endif
|
|
|
|
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
|
|
spin = env_get("spin_table_compat");
|
|
if (spin && (*spin == 'n'))
|
|
spin_table_compat = 0;
|
|
else
|
|
spin_table_compat = 1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
set_liodns();
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
setup_qbman_portals();
|
|
#endif
|
|
#endif
|
|
|
|
l2cache_init();
|
|
#if defined(CONFIG_RAMBOOT_PBL)
|
|
disable_cpc_sram();
|
|
#endif
|
|
enable_cpc();
|
|
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
|
|
enable_tdm_law();
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_FSL_NO_SERDES
|
|
/* needs to be in ram since code uses global static vars */
|
|
fsl_serdes_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
|
|
#define MCFGR_AXIPIPE 0x000000f0
|
|
if (IS_SVR_REV(svr, 1, 0))
|
|
sec_clrbits32(&sec->mcfgr, MCFGR_AXIPIPE);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
|
|
if (IS_SVR_REV(svr, 1, 0)) {
|
|
int i;
|
|
__be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
|
|
|
|
for (i = 0; i < 12; i++) {
|
|
p += i + (i > 5 ? 11 : 0);
|
|
out_be32(p, 0x2);
|
|
}
|
|
p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
|
|
out_be32(p, 0x34);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_SRIO
|
|
srio_init();
|
|
#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
|
|
char *s = env_get("bootmaster");
|
|
if (s) {
|
|
if (!strcmp(s, "SRIO1")) {
|
|
srio_boot_master(1);
|
|
srio_boot_master_release_slave(1);
|
|
}
|
|
if (!strcmp(s, "SRIO2")) {
|
|
srio_boot_master(2);
|
|
srio_boot_master_release_slave(2);
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_MP)
|
|
setup_mp();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
|
|
{
|
|
if (SVR_MAJ(svr) < 3) {
|
|
void *p;
|
|
p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
|
|
setbits_be32(p, 1 << (31 - 14));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_LBC_LCRR
|
|
/*
|
|
* Modify the CLKDIV field of LCRR register to improve the writing
|
|
* speed for NOR flash.
|
|
*/
|
|
clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
|
|
__raw_readl(&lbc->lcrr);
|
|
isync();
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
|
|
udelay(100);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
|
|
{
|
|
struct ccsr_usb_phy __iomem *usb_phy1 =
|
|
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
|
|
if (has_erratum_a006261())
|
|
fsl_erratum_a006261_workaround(usb_phy1);
|
|
#endif
|
|
out_be32(&usb_phy1->usb_enable_override,
|
|
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
|
|
{
|
|
struct ccsr_usb_phy __iomem *usb_phy2 =
|
|
(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
|
|
if (has_erratum_a006261())
|
|
fsl_erratum_a006261_workaround(usb_phy2);
|
|
#endif
|
|
out_be32(&usb_phy2->usb_enable_override,
|
|
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
|
|
/* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
|
|
* multi-bit ECC errors which has impact on performance, so software
|
|
* should disable all ECC reporting from USB1 and USB2.
|
|
*/
|
|
if (IS_SVR_REV(get_svr(), 1, 0)) {
|
|
struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
|
|
(CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
|
|
setbits_be32(&dcfg->ecccr1,
|
|
(DCSR_DCFG_ECC_DISABLE_USB1 |
|
|
DCSR_DCFG_ECC_DISABLE_USB2));
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
|
|
struct ccsr_usb_phy __iomem *usb_phy =
|
|
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
|
|
setbits_be32(&usb_phy->pllprg[1],
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
|
|
CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
|
|
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
|
|
usb_single_source_clk_configure(usb_phy);
|
|
#endif
|
|
setbits_be32(&usb_phy->port1.ctrl,
|
|
CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
|
|
setbits_be32(&usb_phy->port1.drvvbuscfg,
|
|
CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
|
|
setbits_be32(&usb_phy->port1.pwrfltcfg,
|
|
CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
|
|
setbits_be32(&usb_phy->port2.ctrl,
|
|
CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
|
|
setbits_be32(&usb_phy->port2.drvvbuscfg,
|
|
CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
|
|
setbits_be32(&usb_phy->port2.pwrfltcfg,
|
|
CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
|
|
if (has_erratum_a006261())
|
|
fsl_erratum_a006261_workaround(usb_phy);
|
|
#endif
|
|
|
|
#endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
|
|
erratum_a009942_check_cpo();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FMAN_ENET
|
|
fman_enet_init();
|
|
#endif
|
|
|
|
#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
|
|
if (pamu_init() < 0)
|
|
fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CAAM
|
|
sec_init();
|
|
|
|
#if defined(CONFIG_ARCH_C29X)
|
|
if ((SVR_SOC_VER(svr) == SVR_C292) ||
|
|
(SVR_SOC_VER(svr) == SVR_C293))
|
|
sec_init_idx(1);
|
|
|
|
if (SVR_SOC_VER(svr) == SVR_C293)
|
|
sec_init_idx(2);
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_SYS_FSL_ERRATUM_SATA_A001)
|
|
/*
|
|
* For P1022/1013 Rev1.0 silicon, after power on SATA host
|
|
* controller is configured in legacy mode instead of the
|
|
* expected enterprise mode. Software needs to clear bit[28]
|
|
* of HControl register to change to enterprise mode from
|
|
* legacy mode. We assume that the controller is offline.
|
|
*/
|
|
if (IS_SVR_REV(svr, 1, 0) &&
|
|
((SVR_SOC_VER(svr) == SVR_P1022) ||
|
|
(SVR_SOC_VER(svr) == SVR_P1013))) {
|
|
fsl_sata_reg_t *reg;
|
|
|
|
/* first SATA controller */
|
|
reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
|
|
clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
|
|
|
|
/* second SATA controller */
|
|
reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
|
|
clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
|
|
}
|
|
#endif
|
|
|
|
init_used_tlb_cams();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void arch_preboot_os(void)
|
|
{
|
|
u32 msr;
|
|
|
|
/*
|
|
* We are changing interrupt offsets and are about to boot the OS so
|
|
* we need to make sure we disable all async interrupts. EE is already
|
|
* disabled by the time we get called.
|
|
*/
|
|
msr = mfmsr();
|
|
msr &= ~(MSR_ME|MSR_CE);
|
|
mtmsr(msr);
|
|
}
|
|
|
|
#if defined(CONFIG_SATA) && defined(CONFIG_FSL_SATA)
|
|
int sata_initialize(void)
|
|
{
|
|
if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
|
|
return __sata_initialize();
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
void cpu_secondary_init_r(void)
|
|
{
|
|
#ifdef CONFIG_U_QE
|
|
uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
|
|
#elif defined CONFIG_QE
|
|
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
|
|
#endif
|
|
|
|
#ifdef CONFIG_QE
|
|
qe_init(qe_base);
|
|
qe_reset();
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_CHAIN_OF_TRUST
|
|
fsl_setenv_chain_of_trust();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|