Marek Vasut 34fc2a6edf ARM: socfpga: Add boot trampoline for Arria10 ... The Arria10 uses slightly different boot image header than the Gen5 SoCs, in particular the header itself contains an offset from the start of the header to which the Arria10 jumps. This offset must not be negative, yet the header is placed at offset 0x40 of the bootable binary. Therefore, to jump into U-Boot, add a trampoline just past the Arria10 boot header and point to this trampoline at fixed offset from the header generated using the mkimage -T socfpgaimage_v1 . Note that it is not needed to jump back to offset 0x0 of the image, it is possible to jump directly at the reset label and save processing two instructions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Chin Liang See <chin.liang.see@intel.com>		2018-05-08 21:08:42 +02:00
..
cpu	arm: v7R: Add support for enabling caches	2018-05-07 15:53:29 -04:00
dts	ARM: dts: stm32mp157: Add vrefbuf DT node	2018-05-08 09:07:40 -04:00
include	ARM: meson: rename GXBB to GX	2018-05-08 09:07:34 -04:00
lib	arm: v7R: Add support for enabling caches	2018-05-07 15:53:29 -04:00
mach-aspeed	regmap: change regmap_init_mem() to take ofnode instead udevice	2018-05-07 15:49:51 -04:00
mach-at91	gpio: atmel_pio4: give a full configuration when muxing pins	2018-05-08 09:07:36 -04:00
mach-bcm283x	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-davinci	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-exynos	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-highbank	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-imx	imx7: psci: save context id in cpu_on command	2018-05-07 11:52:55 -04:00
mach-integrator	env: Convert CONFIG_ENV_IS_IN... to a choice	2017-08-15 20:50:01 -04:00
mach-keystone	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-kirkwood	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-meson	ARM: meson: rename GXBB to GX	2018-05-08 09:07:34 -04:00
mach-mvebu	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-omap2	arm: dra76: fastboot: extend cpu type for getvar command	2018-05-08 09:07:37 -04:00
mach-orion5x	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-qemu	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-rmobile	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-rockchip	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-s5pc1xx	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-snapdragon	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-socfpga	ARM: socfpga: Add boot trampoline for Arria10	2018-05-08 21:08:42 +02:00
mach-sti	board: Add STMicroelectronics STiH410-B2260 support	2017-03-14 20:40:21 -04:00
mach-stm32	arm: v7R: Add support for MPU	2018-05-07 15:53:29 -04:00
mach-stm32mp	stm32mp: regulator: add SoC pwr regulator support	2018-05-08 09:07:38 -04:00
mach-sunxi	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-tegra	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-uniphier	arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A	2018-05-07 15:53:24 -04:00
mach-versatile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-zynq	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
thumb1/include/asm/proc-armv	arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD	2015-11-10 15:03:48 +01:00
config.mk	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
Kconfig	arm: v7R: Add support for MPU	2018-05-07 15:53:29 -04:00
Kconfig.debug
Makefile	arm: v7R: Add initial support	2018-05-07 15:53:28 -04:00