mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 05:13:21 +09:00
![Jon Hunter](/assets/img/avatar_default.png)
In the current u-boot, the device pin multiplexing and clock initialisation needs to be early during the boot process and before board_init() is called. U-boot is currently crashing on this board because this is not being done early enough. Therefore, add a s_init() function for the omap5912-osk board to do this. Also fix the stack pointer so that it is pointing to the end of the internal RAM and not the beginning as this was also causing the device to crash. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
498 lines
11 KiB
ArmAsm
498 lines
11 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
|
|
*
|
|
* Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
#if defined(CONFIG_OMAP1610)
|
|
#include <./configs/omap1510.h>
|
|
#endif
|
|
|
|
|
|
_TEXT_BASE:
|
|
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
|
|
/*------------------------------------------------------*
|
|
* Ensure i-cache is enabled *
|
|
* To configure TC regs without fetching instruction *
|
|
*------------------------------------------------------*/
|
|
mrc p15, 0, r0, c1, c0
|
|
orr r0, r0, #0x1000
|
|
mcr p15, 0, r0, c1, c0
|
|
|
|
/*------------------------------------------------------*
|
|
*mask all IRQs by setting all bits in the INTMR default*
|
|
*------------------------------------------------------*/
|
|
mov r1, #0xffffffff
|
|
ldr r0, =REG_IHL1_MIR
|
|
str r1, [r0]
|
|
ldr r0, =REG_IHL2_MIR
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT1) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT1
|
|
ldr r1, VAL_ARM_IDLECT1
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT2) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT2
|
|
ldr r1, VAL_ARM_IDLECT2
|
|
str r1, [r0]
|
|
|
|
/*------------------------------------------------------*
|
|
* Set up ARM CLM registers (IDLECT3) *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_ARM_IDLECT3
|
|
ldr r1, VAL_ARM_IDLECT3
|
|
str r1, [r0]
|
|
|
|
mov r1, #0x01 /* PER_EN bit */
|
|
ldr r0, REG_ARM_RSTCT2
|
|
strh r1, [r0] /* CLKM; Peripheral reset. */
|
|
|
|
/* Set CLKM to Sync-Scalable */
|
|
mov r1, #0x1000
|
|
ldr r0, REG_ARM_SYSST
|
|
|
|
mov r2, #0
|
|
1: cmp r2, #1
|
|
streqh r1, [r0]
|
|
add r2, r2, #1
|
|
cmp r2, #0x100 /* wait for any bubbles to finish */
|
|
bne 1b
|
|
|
|
ldr r1, VAL_ARM_CKCTL
|
|
ldr r0, REG_ARM_CKCTL
|
|
strh r1, [r0]
|
|
|
|
/* a few nops to let settle */
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/* setup DPLL 1 */
|
|
/* Ramp up the clock to 96Mhz */
|
|
ldr r1, VAL_DPLL1_CTL
|
|
ldr r0, REG_DPLL1_CTL
|
|
strh r1, [r0]
|
|
ands r1, r1, #0x10 /* Check if PLL is enabled. */
|
|
beq lock_end /* Do not look for lock if BYPASS selected */
|
|
2:
|
|
ldrh r1, [r0]
|
|
ands r1, r1, #0x01 /* Check the LOCK bit.*/
|
|
beq 2b /* loop until bit goes hi. */
|
|
lock_end:
|
|
|
|
/*------------------------------------------------------*
|
|
* Turn off the watchdog during init... *
|
|
*------------------------------------------------------*/
|
|
ldr r0, REG_WATCHDOG
|
|
ldr r1, WATCHDOG_VAL1
|
|
str r1, [r0]
|
|
ldr r1, WATCHDOG_VAL2
|
|
str r1, [r0]
|
|
ldr r0, REG_WSPRDOG
|
|
ldr r1, WSPRDOG_VAL1
|
|
str r1, [r0]
|
|
ldr r0, REG_WWPSDOG
|
|
|
|
watch1Wait:
|
|
ldr r1, [r0]
|
|
tst r1, #0x10
|
|
bne watch1Wait
|
|
|
|
ldr r0, REG_WSPRDOG
|
|
ldr r1, WSPRDOG_VAL2
|
|
str r1, [r0]
|
|
ldr r0, REG_WWPSDOG
|
|
watch2Wait:
|
|
ldr r1, [r0]
|
|
tst r1, #0x10
|
|
bne watch2Wait
|
|
|
|
/* Set memory timings corresponding to the new clock speed */
|
|
ldr r3, VAL_SDRAM_CONFIG_SDF0
|
|
|
|
/* Check execution location to determine current execution location
|
|
* and branch to appropriate initialization code.
|
|
*/
|
|
mov r0, #0x10000000 /* Load physical SDRAM base. */
|
|
mov r1, pc /* Get current execution location. */
|
|
cmp r1, r0 /* Compare. */
|
|
bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
|
|
|
|
/* identify the device revision, -- TMX or TMP(TMS) */
|
|
ldr r0, REG_DEVICE_ID
|
|
ldr r1, [r0]
|
|
|
|
ldr r0, VAL_DEVICE_ID_TMP
|
|
mov r1, r1, lsl #15
|
|
mov r1, r1, lsr #16
|
|
cmp r0, r1
|
|
bne skip_TMP_Patch
|
|
|
|
/* Enable TMP/TMS device new features */
|
|
mov r0, #1
|
|
ldr r1, REG_TC_EMIFF_DOUBLER
|
|
str r0, [r1]
|
|
|
|
/* Enable new ac parameters */
|
|
mov r0, #0x0b
|
|
ldr r1, REG_SDRAM_CONFIG2
|
|
str r0, [r1]
|
|
|
|
ldr r3, VAL_SDRAM_CONFIG_SDF1
|
|
|
|
skip_TMP_Patch:
|
|
|
|
/*
|
|
* Delay for SDRAM initialization.
|
|
*/
|
|
mov r0, #0x1800 /* value should be checked */
|
|
3:
|
|
subs r0, r0, #0x1 /* Decrement count */
|
|
bne 3b
|
|
|
|
/*
|
|
* Set SDRAM control values. Disable refresh before MRS command.
|
|
*/
|
|
|
|
/* mobile ddr operation */
|
|
ldr r0, REG_SDRAM_OPERATION
|
|
mov r2, #07
|
|
str r2, [r0]
|
|
|
|
/* config register */
|
|
ldr r0, REG_SDRAM_CONFIG
|
|
str r3, [r0]
|
|
|
|
/* manual command register */
|
|
ldr r0, REG_SDRAM_MANUAL_CMD
|
|
|
|
/* issue set cke high */
|
|
mov r1, #CMD_SDRAM_CKE_SET_HIGH
|
|
str r1, [r0]
|
|
|
|
/* issue nop */
|
|
mov r1, #CMD_SDRAM_NOP
|
|
str r1, [r0]
|
|
|
|
mov r2, #0x0100
|
|
waitMDDR1:
|
|
subs r2, r2, #1
|
|
bne waitMDDR1 /* delay loop */
|
|
|
|
/* issue precharge */
|
|
mov r1, #CMD_SDRAM_PRECHARGE
|
|
str r1, [r0]
|
|
|
|
/* issue autorefresh x 2 */
|
|
mov r1, #CMD_SDRAM_AUTOREFRESH
|
|
str r1, [r0]
|
|
str r1, [r0]
|
|
|
|
/* mrs register ddr mobile */
|
|
ldr r0, REG_SDRAM_MRS
|
|
mov r1, #0x33
|
|
str r1, [r0]
|
|
|
|
/* emrs1 low-power register */
|
|
ldr r0, REG_SDRAM_EMRS1
|
|
/* self refresh on all banks */
|
|
mov r1, #0
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_DLL_URD_CONTROL
|
|
ldr r1, DLL_URD_CONTROL_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_DLL_LRD_CONTROL
|
|
ldr r1, DLL_LRD_CONTROL_VAL
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_DLL_WRT_CONTROL
|
|
ldr r1, DLL_WRT_CONTROL_VAL
|
|
str r1, [r0]
|
|
|
|
/* delay loop */
|
|
mov r0, #0x0100
|
|
waitMDDR2:
|
|
subs r0, r0, #1
|
|
bne waitMDDR2
|
|
|
|
/*
|
|
* Delay for SDRAM initialization.
|
|
*/
|
|
mov r0, #0x1800
|
|
4:
|
|
subs r0, r0, #1 /* Decrement count. */
|
|
bne 4b
|
|
b common_tc
|
|
|
|
skip_sdram:
|
|
ldr r0, REG_SDRAM_CONFIG
|
|
str r3, [r0]
|
|
|
|
common_tc:
|
|
/* slow interface */
|
|
ldr r1, VAL_TC_EMIFS_CS0_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS0_CONFIG
|
|
str r1, [r0] /* Chip Select 0 */
|
|
|
|
ldr r1, VAL_TC_EMIFS_CS1_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS1_CONFIG
|
|
str r1, [r0] /* Chip Select 1 */
|
|
|
|
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS3_CONFIG
|
|
str r1, [r0] /* Chip Select 3 */
|
|
|
|
ldr r1, VAL_TC_EMIFS_DWS
|
|
ldr r0, REG_TC_EMIFS_DWS
|
|
str r1, [r0] /* Enable EMIFS.RDY for CS1 (ether) */
|
|
|
|
#ifdef CONFIG_H2_OMAP1610
|
|
/* inserting additional 2 clock cycle hold time for LAN */
|
|
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
|
|
ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
|
|
str r1, [r0]
|
|
#endif
|
|
/* Start MPU Timer 1 */
|
|
ldr r0, REG_MPU_LOAD_TIMER
|
|
ldr r1, VAL_MPU_LOAD_TIMER
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_MPU_CNTL_TIMER
|
|
ldr r1, VAL_MPU_CNTL_TIMER
|
|
str r1, [r0]
|
|
|
|
/*
|
|
* Setup a temporary stack
|
|
*/
|
|
ldr sp, SRAM_STACK
|
|
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
|
|
|
|
/*
|
|
* Save the old lr(passed in ip) and the current lr to stack
|
|
*/
|
|
push {ip, lr}
|
|
|
|
/*
|
|
* go setup pll, mux, memory
|
|
*/
|
|
bl s_init
|
|
pop {ip, pc}
|
|
|
|
/* back to arch calling code */
|
|
mov pc, lr
|
|
|
|
/* the literal pools origin */
|
|
.ltorg
|
|
|
|
REG_DEVICE_ID: /* 32 bits */
|
|
.word 0xfffe2004
|
|
REG_TC_EMIFS_CONFIG:
|
|
.word 0xfffecc0c
|
|
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
|
|
.word 0xfffecc10
|
|
REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
|
|
.word 0xfffecc14
|
|
REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
|
|
.word 0xfffecc18
|
|
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
|
|
.word 0xfffecc1c
|
|
REG_TC_EMIFS_DWS: /* 32 bits */
|
|
.word 0xfffecc40
|
|
#ifdef CONFIG_H2_OMAP1610
|
|
REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
|
|
.word 0xfffecc54
|
|
#endif
|
|
|
|
/* MPU clock/reset/power mode control registers */
|
|
REG_ARM_CKCTL: /* 16 bits */
|
|
.word 0xfffece00
|
|
REG_ARM_IDLECT3: /* 16 bits */
|
|
.word 0xfffece24
|
|
REG_ARM_IDLECT2: /* 16 bits */
|
|
.word 0xfffece08
|
|
REG_ARM_IDLECT1: /* 16 bits */
|
|
.word 0xfffece04
|
|
REG_ARM_RSTCT2: /* 16 bits */
|
|
.word 0xfffece14
|
|
REG_ARM_SYSST: /* 16 bits */
|
|
.word 0xfffece18
|
|
|
|
/* DPLL control registers */
|
|
REG_DPLL1_CTL: /* 16 bits */
|
|
.word 0xfffecf00
|
|
|
|
/* Watch Dog register */
|
|
/* secure watchdog stop */
|
|
REG_WSPRDOG:
|
|
.word 0xfffeb048
|
|
/* watchdog write pending */
|
|
REG_WWPSDOG:
|
|
.word 0xfffeb034
|
|
|
|
WSPRDOG_VAL1:
|
|
.word 0x0000aaaa
|
|
WSPRDOG_VAL2:
|
|
.word 0x00005555
|
|
|
|
/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
|
|
counter @8192 rows, 10 ns, 8 burst */
|
|
REG_SDRAM_CONFIG:
|
|
.word 0xfffecc20
|
|
REG_SDRAM_CONFIG2:
|
|
.word 0xfffecc3c
|
|
REG_TC_EMIFF_DOUBLER: /* 32 bits */
|
|
.word 0xfffecc60
|
|
|
|
/* Operation register */
|
|
REG_SDRAM_OPERATION:
|
|
.word 0xfffecc80
|
|
|
|
/* Manual command register */
|
|
REG_SDRAM_MANUAL_CMD:
|
|
.word 0xfffecc84
|
|
|
|
/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
|
|
REG_SDRAM_MRS:
|
|
.word 0xfffecc70
|
|
|
|
/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
|
|
REG_SDRAM_EMRS1:
|
|
.word 0xfffecc78
|
|
|
|
/* WRT DLL register */
|
|
REG_DLL_WRT_CONTROL:
|
|
.word 0xfffecc68
|
|
DLL_WRT_CONTROL_VAL:
|
|
.word 0x03f00002 /* Phase of 72deg, write offset +31 */
|
|
|
|
/* URD DLL register */
|
|
REG_DLL_URD_CONTROL:
|
|
.word 0xfffeccc0
|
|
DLL_URD_CONTROL_VAL:
|
|
.word 0x00800002 /* Phase of 72deg, read offset +31 */
|
|
|
|
/* LRD DLL register */
|
|
REG_DLL_LRD_CONTROL:
|
|
.word 0xfffecccc
|
|
DLL_LRD_CONTROL_VAL:
|
|
.word 0x00800002 /* read offset +31 */
|
|
|
|
REG_WATCHDOG:
|
|
.word 0xfffec808
|
|
WATCHDOG_VAL1:
|
|
.word 0x000000f5
|
|
WATCHDOG_VAL2:
|
|
.word 0x000000a0
|
|
|
|
REG_MPU_LOAD_TIMER:
|
|
.word 0xfffec504
|
|
REG_MPU_CNTL_TIMER:
|
|
.word 0xfffec500
|
|
VAL_MPU_LOAD_TIMER:
|
|
.word 0xffffffff
|
|
VAL_MPU_CNTL_TIMER:
|
|
.word 0xffffffa1
|
|
|
|
/* 96 MHz Samsung Mobile DDR */
|
|
/* Original setting for TMX device */
|
|
VAL_SDRAM_CONFIG_SDF0:
|
|
.word 0x0014e6fe
|
|
|
|
/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
|
|
VAL_SDRAM_CONFIG_SDF1:
|
|
.word 0x0114e6fe
|
|
|
|
VAL_ARM_CKCTL:
|
|
.word 0x2000 /* was: 0x3000, now use CLK_REF for timer input */
|
|
VAL_DPLL1_CTL:
|
|
.word 0x2830
|
|
|
|
#ifdef CONFIG_OSK_OMAP5912
|
|
VAL_TC_EMIFS_CS0_CONFIG:
|
|
.word 0x002130b0
|
|
VAL_TC_EMIFS_CS1_CONFIG:
|
|
.word 0x00001133
|
|
VAL_TC_EMIFS_CS2_CONFIG:
|
|
.word 0x000055f0
|
|
VAL_TC_EMIFS_CS3_CONFIG:
|
|
.word 0x88013141
|
|
VAL_TC_EMIFS_DWS: /* Enable EMIFS.RDY for CS1 access (ether) */
|
|
.word 0x000000c0
|
|
VAL_DEVICE_ID_TMP: /* TMP/TMS=0xb65f, TMX=0xb58c */
|
|
.word 0xb65f
|
|
#endif
|
|
|
|
#ifdef CONFIG_H2_OMAP1610
|
|
VAL_TC_EMIFS_CS0_CONFIG:
|
|
.word 0x00203331
|
|
VAL_TC_EMIFS_CS1_CONFIG:
|
|
.word 0x8180fff3
|
|
VAL_TC_EMIFS_CS2_CONFIG:
|
|
.word 0xf800f22a
|
|
VAL_TC_EMIFS_CS3_CONFIG:
|
|
.word 0x88013141
|
|
VAL_TC_EMIFS_CS1_ADVANCED:
|
|
.word 0x00000022
|
|
#endif
|
|
|
|
VAL_ARM_IDLECT1:
|
|
.word 0x00000400
|
|
VAL_ARM_IDLECT2:
|
|
.word 0x00000886
|
|
VAL_ARM_IDLECT3:
|
|
.word 0x00000015
|
|
|
|
SRAM_STACK:
|
|
.word CONFIG_SYS_INIT_SP_ADDR
|
|
|
|
/* command values */
|
|
.equ CMD_SDRAM_NOP, 0x00000000
|
|
.equ CMD_SDRAM_PRECHARGE, 0x00000001
|
|
.equ CMD_SDRAM_AUTOREFRESH, 0x00000002
|
|
.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007
|