mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 04:48:52 +09:00
![Shengzhou Liu](/assets/img/avatar_default.png)
T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC. It works in two mode: standalone mode and PCIe endpoint mode. T2080PCIe-RDB Feature Overview ------------------------------ Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz DDR Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP devices - 72bit 4GB DDR3-LP SODIMM in slot Ethernet interfaces: - Two 10M/100M/1G RGMII ports on-board - Two 10Gbps SFP+ ports on-board - Two 10Gbps Base-T ports on-board Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes 16 lanes configuration: - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10) - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2) - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3) - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2) - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2) - SerDes-2 Lane G-H: to SATA1 & SATA2 IFC/Local Bus: - NOR: 128MB 16-bit NOR flash - NAND: 512MB 8-bit NAND flash - CPLD: for system controlling with programable header on-board eSPI: - 64MB N25Q512 SPI flash USB: - Two USB2.0 ports with internal PHY (both Type-A) PCIe: - One PCIe x4 gold-finger - One PCIe x4 connector - One PCIe x2 end-point device (C293 Crypto co-processor) SATA: - Two SATA 2.0 ports on-board SDHC: - support a TF-card on-board I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
48 lines
1.2 KiB
C
48 lines
1.2 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __DDR_H__
|
|
#define __DDR_H__
|
|
struct board_specific_parameters {
|
|
u32 n_ranks;
|
|
u32 datarate_mhz_high;
|
|
u32 rank_gb;
|
|
u32 clk_adjust;
|
|
u32 wrlvl_start;
|
|
u32 wrlvl_ctl_2;
|
|
u32 wrlvl_ctl_3;
|
|
};
|
|
|
|
/*
|
|
* These tables contain all valid speeds we want to override with board
|
|
* specific parameters. datarate_mhz_high values need to be in ascending order
|
|
* for each n_ranks group.
|
|
*/
|
|
|
|
static const struct board_specific_parameters udimm0[] = {
|
|
/*
|
|
* memory controller 0
|
|
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
|
|
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
|
|
*/
|
|
{2, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a},
|
|
{2, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09},
|
|
{2, 1600, 2, 5, 8, 0x0808070b, 0x0c0d0e0a},
|
|
{2, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a},
|
|
{2, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c},
|
|
{1, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a},
|
|
{1, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09},
|
|
{1, 1600, 2, 5, 8, 0x0808070b, 0x0c0d0e0a},
|
|
{1, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a},
|
|
{1, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c},
|
|
{}
|
|
};
|
|
|
|
static const struct board_specific_parameters *udimms[] = {
|
|
udimm0,
|
|
};
|
|
#endif
|