mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Priyanka Jain](/assets/img/avatar_default.png)
T1040 has internal display interface unit (DIU) for driving video. T1040QDS supports video mode via -LCD using TI enconder -HDMI type interface via HDMI encoder Chrontel, CH7301C encoder which is I2C programmable is used as HDMI connector on T1040QDS. This patch add support to -enable Video interface for T1040QDS -route qixis multiplexing to enable DIU-HDMI interface on board -program DIU pixel clock gerenartor for T1040 -program HDMI encoder via I2C on board Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
216 lines
5.9 KiB
C
216 lines
5.9 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <linux/ctype.h>
|
|
#include <asm/io.h>
|
|
#include <stdio_dev.h>
|
|
#include <video_fb.h>
|
|
#include <fsl_diu_fb.h>
|
|
#include "../common/qixis.h"
|
|
#include "t1040qds.h"
|
|
#include "t1040qds_qixis.h"
|
|
#include <i2c.h>
|
|
|
|
|
|
#define I2C_DVI_INPUT_DATA_FORMAT_REG 0x1F
|
|
#define I2C_DVI_PLL_CHARGE_CNTL_REG 0x33
|
|
#define I2C_DVI_PLL_DIVIDER_REG 0x34
|
|
#define I2C_DVI_PLL_SUPPLY_CNTL_REG 0x35
|
|
#define I2C_DVI_PLL_FILTER_REG 0x36
|
|
#define I2C_DVI_TEST_PATTERN_REG 0x48
|
|
#define I2C_DVI_POWER_MGMT_REG 0x49
|
|
#define I2C_DVI_LOCK_STATE_REG 0x4D
|
|
#define I2C_DVI_SYNC_POLARITY_REG 0x56
|
|
|
|
/*
|
|
* Set VSYNC/HSYNC to active high. This is polarity of sync signals
|
|
* from DIU->DVI. The DIU default is active igh, so DVI is set to
|
|
* active high.
|
|
*/
|
|
#define I2C_DVI_INPUT_DATA_FORMAT_VAL 0x98
|
|
|
|
#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL 0x06
|
|
#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL 0x26
|
|
#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL 0xA0
|
|
#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL 0x08
|
|
#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL 0x16
|
|
#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL 0x60
|
|
|
|
/* Clear test pattern */
|
|
#define I2C_DVI_TEST_PATTERN_VAL 0x18
|
|
/* Exit Power-down mode */
|
|
#define I2C_DVI_POWER_MGMT_VAL 0xC0
|
|
|
|
/* Monitor polarity is handled via DVI Sync Polarity Register */
|
|
#define I2C_DVI_SYNC_POLARITY_VAL 0x00
|
|
|
|
/*
|
|
* DIU Area Descriptor
|
|
*
|
|
* Note that we need to byte-swap the value before it's written to the AD
|
|
* register. So even though the registers don't look like they're in the same
|
|
* bit positions as they are on the MPC8610, the same value is written to the
|
|
* AD register on the MPC8610 and on the P1022.
|
|
*/
|
|
#define AD_BYTE_F 0x10000000
|
|
#define AD_ALPHA_C_SHIFT 25
|
|
#define AD_BLUE_C_SHIFT 23
|
|
#define AD_GREEN_C_SHIFT 21
|
|
#define AD_RED_C_SHIFT 19
|
|
#define AD_PIXEL_S_SHIFT 16
|
|
#define AD_COMP_3_SHIFT 12
|
|
#define AD_COMP_2_SHIFT 8
|
|
#define AD_COMP_1_SHIFT 4
|
|
#define AD_COMP_0_SHIFT 0
|
|
|
|
/* Programming of HDMI Chrontel CH7301 connector */
|
|
int diu_set_dvi_encoder(unsigned int pixclock)
|
|
{
|
|
int ret;
|
|
u8 temp;
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DIU);
|
|
|
|
temp = I2C_DVI_TEST_PATTERN_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1,
|
|
&temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select proper dvi test pattern\n");
|
|
return ret;
|
|
}
|
|
temp = I2C_DVI_INPUT_DATA_FORMAT_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG,
|
|
1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi input data format\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set Sync polarity register */
|
|
temp = I2C_DVI_SYNC_POLARITY_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1,
|
|
&temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi syc polarity\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set PLL registers based on pixel clock rate*/
|
|
if (pixclock > 65000000) {
|
|
temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll charge_cntl\n");
|
|
return ret;
|
|
}
|
|
temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll divider\n");
|
|
return ret;
|
|
}
|
|
temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll filter\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll charge_cntl\n");
|
|
return ret;
|
|
}
|
|
temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll divider\n");
|
|
return ret;
|
|
}
|
|
temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
|
|
I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi pll filter\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
temp = I2C_DVI_POWER_MGMT_VAL;
|
|
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1,
|
|
&temp, 1);
|
|
if (ret) {
|
|
puts("I2C: failed to select dvi power mgmt\n");
|
|
return ret;
|
|
}
|
|
|
|
udelay(500);
|
|
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
|
|
return 0;
|
|
}
|
|
|
|
void diu_set_pixel_clock(unsigned int pixclock)
|
|
{
|
|
unsigned long speed_ccb, temp;
|
|
u32 pixval;
|
|
int ret = 0;
|
|
speed_ccb = get_bus_freq(0);
|
|
temp = 1000000000 / pixclock;
|
|
temp *= 1000;
|
|
pixval = speed_ccb / temp;
|
|
|
|
/* Program HDMI encoder */
|
|
ret = diu_set_dvi_encoder(temp);
|
|
if (ret) {
|
|
puts("Failed to set DVI encoder\n");
|
|
return;
|
|
}
|
|
|
|
/* Program pixel clock */
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
|
|
((pixval << PXCK_BITS_START) & PXCK_MASK));
|
|
/* enable clock*/
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
|
|
((pixval << PXCK_BITS_START) & PXCK_MASK));
|
|
}
|
|
|
|
int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
|
|
{
|
|
u32 pixel_format;
|
|
u8 sw;
|
|
|
|
/*Route I2C4 to DIU system as HSYNC/VSYNC*/
|
|
sw = QIXIS_READ(brdcfg[5]);
|
|
QIXIS_WRITE(brdcfg[5],
|
|
((sw & ~(BRDCFG5_IMX_MASK)) | (BRDCFG5_IMX_DIU)));
|
|
|
|
/*Configure Display ouput port as HDMI*/
|
|
sw = QIXIS_READ(brdcfg[15]);
|
|
QIXIS_WRITE(brdcfg[15],
|
|
((sw & ~(BRDCFG15_LCDPD_MASK | BRDCFG15_DIUSEL_MASK))
|
|
| (BRDCFG15_LCDPD_ENABLED | BRDCFG15_DIUSEL_HDMI)));
|
|
|
|
pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
|
|
(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
|
|
(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
|
|
(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
|
|
(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
|
|
|
|
printf("DIU: Switching to monitor @ %ux%u\n", xres, yres);
|
|
|
|
|
|
return fsl_diu_init(xres, yres, pixel_format, 0);
|
|
}
|