u-boot-brain/drivers/pci/pci_auto.c
Masahiro Yamada b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00

452 lines
12 KiB
C

/*
* arch/powerpc/kernel/pci_auto.c
*
* PCI autoconfiguration library
*
* Author: Matt Porter <mporter@mvista.com>
*
* Copyright 2000 MontaVista Software Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <pci.h>
#undef DEBUG
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
#define PCIAUTO_IDE_MODE_MASK 0x05
/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
#endif
/*
*
*/
void pciauto_region_init(struct pci_region *res)
{
/*
* Avoid allocating PCI resources from address 0 -- this is illegal
* according to PCI 2.1 and moreover, this is known to cause Linux IDE
* drivers to fail. Use a reasonable starting value of 0x1000 instead.
*/
res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
}
void pciauto_region_align(struct pci_region *res, pci_size_t size)
{
res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
}
int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
pci_addr_t *bar)
{
pci_addr_t addr;
if (!res) {
DEBUGF("No resource");
goto error;
}
addr = ((res->bus_lower - 1) | (size - 1)) + 1;
if (addr - res->bus_start + size > res->size) {
DEBUGF("No room in resource");
goto error;
}
res->bus_lower = addr + size;
DEBUGF("address=0x%llx bus_lower=0x%llx", (u64)addr, (u64)res->bus_lower);
*bar = addr;
return 0;
error:
*bar = (pci_addr_t)-1;
return -1;
}
/*
*
*/
void pciauto_setup_device(struct pci_controller *hose,
pci_dev_t dev, int bars_num,
struct pci_region *mem,
struct pci_region *prefetch,
struct pci_region *io)
{
u32 bar_response;
pci_size_t bar_size;
u16 cmdstat = 0;
int bar, bar_nr = 0;
#ifndef CONFIG_PCI_ENUM_ONLY
pci_addr_t bar_value;
struct pci_region *bar_res;
int found_mem64 = 0;
#endif
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
for (bar = PCI_BASE_ADDRESS_0;
bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
/* Tickle the BAR and get the response */
#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
#endif
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
continue;
#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 0;
#endif
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
& 0xffff) + 1;
#ifndef CONFIG_PCI_ENUM_ONLY
bar_res = io;
#endif
DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size);
} else {
if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64) {
u32 bar_response_upper;
u64 bar64;
#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar + 4,
0xffffffff);
#endif
pci_hose_read_config_dword(hose, dev, bar + 4,
&bar_response_upper);
bar64 = ((u64)bar_response_upper << 32) | bar_response;
bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 1;
#endif
} else {
bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
}
#ifndef CONFIG_PCI_ENUM_ONLY
if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
bar_res = prefetch;
else
bar_res = mem;
#endif
DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size);
}
#ifndef CONFIG_PCI_ENUM_ONLY
if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
/* Write it out and update our limit */
pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
if (found_mem64) {
bar += 4;
#ifdef CONFIG_SYS_PCI_64BIT
pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
#else
/*
* If we are a 64-bit decoder then increment to the
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
*/
pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
#endif
}
}
#endif
cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
DEBUGF("\n");
bar_nr++;
}
pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
CONFIG_SYS_PCI_CACHE_LINE_SIZE);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
}
void pciauto_prescan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
u16 cmdstat;
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
PCI_BUS(dev) - hose->first_busno);
pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
sub_bus - hose->first_busno);
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
(pci_mem->bus_lower & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
}
if (pci_prefetch) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
(pci_prefetch->bus_lower & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
} else {
/* We don't support prefetchable memory for now, so disable */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
(pci_io->bus_lower & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
(pci_io->bus_lower & 0xffff0000) >> 16);
cmdstat |= PCI_COMMAND_IO;
}
/* Enable memory and I/O accesses, enable bus master */
pci_hose_write_config_word(hose, dev, PCI_COMMAND,
cmdstat | PCI_COMMAND_MASTER);
}
void pciauto_postscan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
sub_bus - hose->first_busno);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
(pci_mem->bus_lower - 1) >> 16);
}
if (pci_prefetch) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
(pci_prefetch->bus_lower - 1) >> 16);
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
}
}
/*
*
*/
void pciauto_config_init(struct pci_controller *hose)
{
int i;
hose->pci_io = hose->pci_mem = hose->pci_prefetch = NULL;
for (i = 0; i < hose->region_count; i++) {
switch(hose->regions[i].flags) {
case PCI_REGION_IO:
if (!hose->pci_io ||
hose->pci_io->size < hose->regions[i].size)
hose->pci_io = hose->regions + i;
break;
case PCI_REGION_MEM:
if (!hose->pci_mem ||
hose->pci_mem->size < hose->regions[i].size)
hose->pci_mem = hose->regions + i;
break;
case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
if (!hose->pci_prefetch ||
hose->pci_prefetch->size < hose->regions[i].size)
hose->pci_prefetch = hose->regions + i;
break;
}
}
if (hose->pci_mem) {
pciauto_region_init(hose->pci_mem);
DEBUGF("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory [%llx-%llxx]\n",
(u64)hose->pci_mem->bus_start,
(u64)(hose->pci_mem->bus_start + hose->pci_mem->size - 1),
(u64)hose->pci_mem->phys_start,
(u64)(hose->pci_mem->phys_start + hose->pci_mem->size - 1));
}
if (hose->pci_prefetch) {
pciauto_region_init(hose->pci_prefetch);
DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory [%llx-%llx]\n",
(u64)hose->pci_prefetch->bus_start,
(u64)(hose->pci_prefetch->bus_start +
hose->pci_prefetch->size - 1),
(u64)hose->pci_prefetch->phys_start,
(u64)(hose->pci_prefetch->phys_start +
hose->pci_prefetch->size - 1));
}
if (hose->pci_io) {
pciauto_region_init(hose->pci_io);
DEBUGF("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory: [%llx-%llx]\n",
(u64)hose->pci_io->bus_start,
(u64)(hose->pci_io->bus_start + hose->pci_io->size - 1),
(u64)hose->pci_io->phys_start,
(u64)(hose->pci_io->phys_start + hose->pci_io->size - 1));
}
}
/*
* HJF: Changed this to return int. I think this is required
* to get the correct result when scanning bridges
*/
int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
{
unsigned int sub_bus = PCI_BUS(dev);
unsigned short class;
unsigned char prg_iface;
int n;
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
switch (class) {
case PCI_CLASS_BRIDGE_PCI:
hose->current_busno++;
pciauto_setup_device(hose, dev, 2, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
/* Passing in current_busno allows for sibling P2P bridges */
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
/*
* need to figure out if this is a subordinate bridge on the bus
* to be able to properly set the pri/sec/sub bridge registers.
*/
n = pci_hose_scan_bus(hose, hose->current_busno);
/* figure out the deepest we've gone for this leg */
sub_bus = max((unsigned int)n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
break;
case PCI_CLASS_STORAGE_IDE:
pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
return sub_bus;
}
pciauto_setup_device(hose, dev, 6, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
/*
* just do a minimal setup of the bridge,
* let the OS take care of the rest
*/
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
PCI_DEV(dev));
hose->current_busno++;
break;
#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
case PCI_CLASS_BRIDGE_OTHER:
DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
PCI_DEV(dev));
break;
#endif
#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
case PCI_CLASS_BRIDGE_OTHER:
/*
* The host/PCI bridge 1 seems broken in 8349 - it presents
* itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
* device claiming resources io/mem/irq.. we only allow for
* the PIMMR window to be allocated (BAR0 - 1MB size)
*/
DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
break;
#endif
case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
DEBUGF("PCI AutoConfig: Found PowerPC device\n");
default:
pciauto_setup_device(hose, dev, 6, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
break;
}
return sub_bus;
}