mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
30915ab95d
The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
89 lines
2.3 KiB
Plaintext
89 lines
2.3 KiB
Plaintext
CONFIG_PPC=y
|
|
CONFIG_SYS_TEXT_BASE=0xFE000000
|
|
CONFIG_SYS_CLK_FREQ=66666667
|
|
CONFIG_MPC83xx=y
|
|
CONFIG_HIGH_BATS=y
|
|
CONFIG_TARGET_MPC8313ERDB_NOR=y
|
|
CONFIG_CORE_PLL_RATIO_2_1=y
|
|
CONFIG_PCI_HOST_MODE_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER1_ENABLE=y
|
|
CONFIG_BOOT_MEMORY_SPACE_LOW=y
|
|
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
|
|
CONFIG_TSEC1_MODE_RGMII=y
|
|
CONFIG_TSEC2_MODE_RGMII=y
|
|
CONFIG_BAT0=y
|
|
CONFIG_BAT0_NAME="DDR"
|
|
CONFIG_BAT0_BASE=0x00000000
|
|
CONFIG_BAT0_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT0_ACCESS_RW=y
|
|
CONFIG_BAT0_USER_MODE_VALID=y
|
|
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT1=y
|
|
CONFIG_BAT1_NAME="PCI1_MEM"
|
|
CONFIG_BAT1_BASE=0x80000000
|
|
CONFIG_BAT1_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT1_ACCESS_RW=y
|
|
CONFIG_BAT1_USER_MODE_VALID=y
|
|
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT2=y
|
|
CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
|
|
CONFIG_BAT2_BASE=0x90000000
|
|
CONFIG_BAT2_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT2_ACCESS_RW=y
|
|
CONFIG_BAT2_ICACHE_INHIBITED=y
|
|
CONFIG_BAT2_ICACHE_GUARDED=y
|
|
CONFIG_BAT2_DCACHE_INHIBITED=y
|
|
CONFIG_BAT2_DCACHE_GUARDED=y
|
|
CONFIG_BAT2_USER_MODE_VALID=y
|
|
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT5=y
|
|
CONFIG_BAT5_NAME="IMMR"
|
|
CONFIG_BAT5_BASE=0xE0000000
|
|
CONFIG_BAT5_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT5_ACCESS_RW=y
|
|
CONFIG_BAT5_ICACHE_INHIBITED=y
|
|
CONFIG_BAT5_ICACHE_GUARDED=y
|
|
CONFIG_BAT5_DCACHE_INHIBITED=y
|
|
CONFIG_BAT5_DCACHE_GUARDED=y
|
|
CONFIG_BAT5_USER_MODE_VALID=y
|
|
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT6=y
|
|
CONFIG_BAT6_NAME="STACK_IN_DCACHE"
|
|
CONFIG_BAT6_BASE=0xF0000000
|
|
CONFIG_BAT6_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT6_ACCESS_RW=y
|
|
CONFIG_BAT6_ICACHE_GUARDED=y
|
|
CONFIG_BAT6_DCACHE_GUARDED=y
|
|
CONFIG_BAT6_USER_MODE_VALID=y
|
|
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
|
|
CONFIG_BOOTDELAY=6
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_PCI=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_DATE=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_SYS_FLASH_PROTECTION=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_TSEC_ENET=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_OF_LIBFDT=y
|