mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-10 23:03:29 +09:00
![Hans de Goede](/assets/img/avatar_default.png)
While working on adding more boards I noticed that we lack a config for the 512M cubieboard, and that some of the new boards which I want to add also have 512M and 1G variants, rather then adding 2 defconfig's for all of these, lets switch the exising boards which have both a 512M and 1024M variant over to the sun4i dram autoconfig code. This also drops the foo_RAMSIZE_defconfig variants of boards where we currently have 2 separate configs already. Note: 1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with a value other then its default for now, but we need this to be configurable to support some new boards with auto dram config. 2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match the defaults, this is done to make it more clear what values are used for a certain board. This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G variants, the dram autoconfig code has also been tested on a 512M mk802 (a defconfig for the mk802 is added in a later patch). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
183 lines
6.4 KiB
C
183 lines
6.4 KiB
C
/*
|
|
* (C) Copyright 2007-2012
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Berg Xing <bergxing@allwinnertech.com>
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
*
|
|
* Sunxi platform dram register definition.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _SUNXI_DRAM_SUN4I_H
|
|
#define _SUNXI_DRAM_SUN4I_H
|
|
|
|
struct sunxi_dram_reg {
|
|
u32 ccr; /* 0x00 controller configuration register */
|
|
u32 dcr; /* 0x04 dram configuration register */
|
|
u32 iocr; /* 0x08 i/o configuration register */
|
|
u32 csr; /* 0x0c controller status register */
|
|
u32 drr; /* 0x10 dram refresh register */
|
|
u32 tpr0; /* 0x14 dram timing parameters register 0 */
|
|
u32 tpr1; /* 0x18 dram timing parameters register 1 */
|
|
u32 tpr2; /* 0x1c dram timing parameters register 2 */
|
|
u32 gdllcr; /* 0x20 global dll control register */
|
|
u8 res0[0x28];
|
|
u32 rslr0; /* 0x4c rank system latency register */
|
|
u32 rslr1; /* 0x50 rank system latency register */
|
|
u8 res1[0x8];
|
|
u32 rdgr0; /* 0x5c rank dqs gating register */
|
|
u32 rdgr1; /* 0x60 rank dqs gating register */
|
|
u8 res2[0x34];
|
|
u32 odtcr; /* 0x98 odt configuration register */
|
|
u32 dtr0; /* 0x9c data training register 0 */
|
|
u32 dtr1; /* 0xa0 data training register 1 */
|
|
u32 dtar; /* 0xa4 data training address register */
|
|
u32 zqcr0; /* 0xa8 zq control register 0 */
|
|
u32 zqcr1; /* 0xac zq control register 1 */
|
|
u32 zqsr; /* 0xb0 zq status register */
|
|
u32 idcr; /* 0xb4 initializaton delay configure reg */
|
|
u8 res3[0x138];
|
|
u32 mr; /* 0x1f0 mode register */
|
|
u32 emr; /* 0x1f4 extended mode register */
|
|
u32 emr2; /* 0x1f8 extended mode register */
|
|
u32 emr3; /* 0x1fc extended mode register */
|
|
u32 dllctr; /* 0x200 dll control register */
|
|
u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
|
|
/* 0x208 dll control register 1(byte 1) */
|
|
/* 0x20c dll control register 2(byte 2) */
|
|
/* 0x210 dll control register 3(byte 3) */
|
|
/* 0x214 dll control register 4(byte 4) */
|
|
u32 dqtr0; /* 0x218 dq timing register */
|
|
u32 dqtr1; /* 0x21c dq timing register */
|
|
u32 dqtr2; /* 0x220 dq timing register */
|
|
u32 dqtr3; /* 0x224 dq timing register */
|
|
u32 dqstr; /* 0x228 dqs timing register */
|
|
u32 dqsbtr; /* 0x22c dqsb timing register */
|
|
u32 mcr; /* 0x230 mode configure register */
|
|
u8 res[0x8];
|
|
u32 ppwrsctl; /* 0x23c pad power save control */
|
|
u32 apr; /* 0x240 arbiter period register */
|
|
u32 pldtr; /* 0x244 priority level data threshold reg */
|
|
u8 res5[0x8];
|
|
u32 hpcr[32]; /* 0x250 host port configure register */
|
|
u8 res6[0x10];
|
|
u32 csel; /* 0x2e0 controller select register */
|
|
};
|
|
|
|
struct dram_para {
|
|
u32 clock;
|
|
u32 mbus_clock;
|
|
u32 type;
|
|
u32 rank_num;
|
|
u32 density;
|
|
u32 io_width;
|
|
u32 bus_width;
|
|
u32 cas;
|
|
u32 zq;
|
|
u32 odt_en;
|
|
u32 size; /* For compat with dram.c files from u-boot-sunxi, unused */
|
|
u32 tpr0;
|
|
u32 tpr1;
|
|
u32 tpr2;
|
|
u32 tpr3;
|
|
u32 tpr4;
|
|
u32 tpr5;
|
|
u32 emr1;
|
|
u32 emr2;
|
|
u32 emr3;
|
|
u32 dqs_gating_delay;
|
|
u32 active_windowing;
|
|
};
|
|
|
|
#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
|
|
#define DRAM_CCR_DQS_GATE (0x1 << 14)
|
|
#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
|
|
#define DRAM_CCR_ITM_OFF (0x1 << 28)
|
|
#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
|
|
#define DRAM_CCR_INIT (0x1 << 31)
|
|
|
|
#define DRAM_MEMORY_TYPE_DDR1 1
|
|
#define DRAM_MEMORY_TYPE_DDR2 2
|
|
#define DRAM_MEMORY_TYPE_DDR3 3
|
|
#define DRAM_MEMORY_TYPE_LPDDR2 4
|
|
#define DRAM_MEMORY_TYPE_LPDDR 5
|
|
#define DRAM_DCR_TYPE (0x1 << 0)
|
|
#define DRAM_DCR_TYPE_DDR2 0x0
|
|
#define DRAM_DCR_TYPE_DDR3 0x1
|
|
#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
|
|
#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
|
|
#define DRAM_DCR_IO_WIDTH_8BIT 0x0
|
|
#define DRAM_DCR_IO_WIDTH_16BIT 0x1
|
|
#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
|
|
#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
|
|
#define DRAM_DCR_CHIP_DENSITY_256M 0x0
|
|
#define DRAM_DCR_CHIP_DENSITY_512M 0x1
|
|
#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
|
|
#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
|
|
#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
|
|
#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
|
|
#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
|
|
#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
|
|
#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
|
|
#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
|
|
#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
|
|
#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
|
|
#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
|
|
#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
|
|
#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
|
|
#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
|
|
#define DRAM_DCR_MODE_SEQ 0x0
|
|
#define DRAM_DCR_MODE_INTERLEAVE 0x1
|
|
|
|
#define DRAM_CSR_DTERR (0x1 << 20)
|
|
#define DRAM_CSR_DTIERR (0x1 << 21)
|
|
#define DRAM_CSR_FAILED (DRAM_CSR_DTERR | DRAM_CSR_DTIERR)
|
|
|
|
#define DRAM_DRR_TRFC(n) ((n) & 0xff)
|
|
#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
|
|
#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
|
|
|
|
#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
|
|
#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
|
|
#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
|
|
#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
|
|
#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
|
|
#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
|
|
#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
|
|
#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
|
|
#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
|
|
#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
|
|
#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
|
|
#define DRAM_MCR_RESET (0x1 << 12)
|
|
#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
|
|
#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
|
|
#define DRAM_MCR_DCLK_OUT (0x1 << 16)
|
|
|
|
#define DRAM_DLLCR_NRESET (0x1 << 30)
|
|
#define DRAM_DLLCR_DISABLE (0x1 << 31)
|
|
|
|
#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
|
|
#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
|
|
#define DRAM_ZQCR0_ZCAL (1 << 31) /* Starts ZQ calibration when set to 1 */
|
|
#define DRAM_ZQCR0_ZDEN (1 << 28) /* Uses ZDATA instead of doing calibration */
|
|
|
|
#define DRAM_ZQSR_ZDONE (1 << 31) /* ZQ calibration completion flag */
|
|
|
|
#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
|
|
#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
|
|
|
|
#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
|
|
#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
|
|
#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
|
|
#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
|
|
#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
|
|
#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
|
|
#define DRAM_MR_POWER_DOWN (0x1 << 12)
|
|
|
|
#define DRAM_CSEL_MAGIC 0x16237495
|
|
|
|
unsigned long dramc_init(struct dram_para *para);
|
|
|
|
#endif /* _SUNXI_DRAM_SUN4I_H */
|