Patrick Delaunay 306a5cf24f stm32mp: stm32prog: add support of RAM target ... Add support of RAM target in flashlayout to load kernel image ("system") and device tree ("filesystem") in DDR with DFU and start these images. The flashlayout.tsv is: - 0x01 fsbl Binary none 0x00000000 tf-a.stm32 - 0x03 ssbl Binary none 0x00000000 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 dtb.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>		2020-05-14 09:02:12 +02:00
..
cpu	imx: imx8qm/qxp: Recover SPL data section for partition reboot	2020-05-10 20:55:20 +02:00
dts	board: stm32mp1: reserve memory for OP-TEE in device tree	2020-05-14 09:02:12 +02:00
include	imx: imx8qm/qxp: check whether m4 partition booted	2020-05-10 20:55:20 +02:00
lib	cmd: cache: Fix non-cached memory cachability	2020-05-07 09:01:42 -04:00
mach-aspeed	dm: core: Require users of devres to include the header	2020-02-05 19:33:46 -07:00
mach-at91	common: Move hang() to the same header as panic()	2020-01-24 23:06:49 +05:30
mach-bcm283x	rpi4: Update memory map to accommodate scb devices	2020-01-29 18:30:33 +01:00
mach-bcmstb
mach-cortina	board: presidio-asic: Add basic G3 engr. development board support	2020-02-07 16:16:01 -05:00
mach-davinci	mach-davinci: Hard-code the default SPL_LDSCRIPT path	2020-03-16 18:54:18 -04:00
mach-exynos	arm: exynos: Read default MMC device from XOM[7:5] pins	2020-01-28 09:54:05 +09:00
mach-highbank
mach-imx	imx8: cpu: check resource owned after sid fail	2020-05-10 20:55:21 +02:00
mach-integrator
mach-k3	arm: K3: Increase default SYSFW image size allocation	2020-05-11 10:16:49 +05:30
mach-keystone	common: Move hang() to the same header as panic()	2020-01-24 23:06:49 +05:30
mach-kirkwood	common: Move reset_cpu() to the CPU header	2020-01-24 23:06:49 +05:30
mach-mediatek	arm: mediatek: remove unused binman config	2020-03-10 17:08:13 -04:00
mach-meson	phy: Use _nodev naming convention if non-device clients	2020-05-11 01:30:49 +05:30
mach-mvebu	arm: mvebu: correct SPL boot configs for SPI/MMC	2020-04-22 14:28:15 +02:00
mach-omap2	spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()	2020-04-22 20:41:57 +08:00
mach-orion5x	edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfig	2020-03-16 18:54:18 -04:00
mach-owl	arm: add support Actions Semi S700	2020-04-24 16:40:09 -04:00
mach-qemu	qemu: don't allow to select 32- and 64-bit	2020-04-24 10:51:32 -04:00
mach-rmobile	common: Move some cache and MMU functions out of common.h	2019-12-02 18:23:55 -05:00
mach-rockchip	spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()	2020-04-22 20:41:57 +08:00
mach-s5pc1xx	common: Move some cache and MMU functions out of common.h	2019-12-02 18:23:55 -05:00
mach-snapdragon	mach-snapdragon: Fix overwriting last digit of serial number	2020-04-03 11:47:47 -04:00
mach-socfpga	arm: socfpga: stratix10: Fix incorrect CLKMGR_S10_PERPLL_BYPASS offset	2020-04-27 09:14:52 +02:00
mach-sti
mach-stm32
mach-stm32mp	stm32mp: stm32prog: add support of RAM target	2020-05-14 09:02:12 +02:00
mach-sunxi	sunxi: SPL SPI: Add SPI boot support for the Allwinner H6 SoC	2020-03-18 18:12:04 +05:30
mach-tegra	ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support	2020-04-02 14:30:02 -07:00
mach-u8500	board: Add new Samsung "stemmy" board based on ST-Ericsson U8500	2020-01-22 17:47:57 -05:00
mach-uniphier	spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()	2020-04-22 20:41:57 +08:00
mach-versal	arm: asm/cache.c: Introduce arm_reserve_mmu	2020-04-24 15:17:14 -04:00
mach-versatile
mach-zynq	ARM: zynq: Do not print message about boot device	2020-04-06 12:52:45 +02:00
mach-zynqmp	arm: asm/cache.c: Introduce arm_reserve_mmu	2020-04-24 15:17:14 -04:00
mach-zynqmp-r5	common: Move reset_cpu() to the CPU header	2020-01-24 23:06:49 +05:30
thumb1/include/asm/proc-armv
config.mk
Kconfig	arm: juno: enable USB	2020-05-07 09:01:42 -04:00
Kconfig.debug
Makefile	arm: Add support for ST-Ericsson U8500 SoC	2020-01-22 17:47:57 -05:00