mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
This fixes commit d31e9c575f
,
which broke booting from SD card on all SoCFPGA boards. The
patch assumes the bootloader partition to be partition 3, at
the end of the SD card, which doesn't make any sense. U-Boot
assumes the bootloader partition is partition 1 or that the
bootloader image is at offset +1 MiB from the start of SD card.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sylvain Lesne <lesne@alse-fr.com>
375 lines
9.7 KiB
C
375 lines
9.7 KiB
C
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __CONFIG_SOCFPGA_COMMON_H__
|
|
#define __CONFIG_SOCFPGA_COMMON_H__
|
|
|
|
/* Virtual target or real hardware */
|
|
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
|
|
#define CONFIG_SYS_THUMB_BUILD
|
|
|
|
/*
|
|
* High level configuration
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
#define CONFIG_ARCH_EARLY_INIT_R
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_CLOCKS
|
|
|
|
#define CONFIG_CRC32_VERIFY
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/* add target to build it automatically upon "make" */
|
|
#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp"
|
|
|
|
/*
|
|
* Memory configurations
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0x0
|
|
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
|
|
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TEXT_BASE 0x08000040
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x01000040
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot general configurations
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
|
|
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
|
|
#define CONFIG_CMDLINE_EDITING /* Command history etc */
|
|
|
|
#ifndef CONFIG_SYS_HOSTNAME
|
|
#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
|
|
#endif
|
|
|
|
/*
|
|
* Cache
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
|
|
|
|
/*
|
|
* SDRAM controller
|
|
*/
|
|
#define CONFIG_ALTERA_SDRAM
|
|
|
|
/*
|
|
* EPCS/EPCQx1 Serial Flash Controller
|
|
*/
|
|
#ifdef CONFIG_ALTERA_SPI
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
/*
|
|
* The base address is configurable in QSys, each board must specify the
|
|
* base address based on it's particular FPGA configuration. Please note
|
|
* that the address here is incremented by 0x400 from the Base address
|
|
* selected in QSys, since the SPI registers are at offset +0x400.
|
|
* #define CONFIG_SYS_SPI_BASE 0xff240400
|
|
*/
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet on SoC (EMAC)
|
|
*/
|
|
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
|
|
#define CONFIG_DW_ALTDESCRIPTOR
|
|
#define CONFIG_MII
|
|
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
|
|
#define CONFIG_PHY_GIGE
|
|
#endif
|
|
|
|
/*
|
|
* FPGA Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_FPGA
|
|
#define CONFIG_FPGA
|
|
#define CONFIG_FPGA_ALTERA
|
|
#define CONFIG_FPGA_SOCFPGA
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#endif
|
|
|
|
/*
|
|
* L4 OSC1 Timer 0
|
|
*/
|
|
/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
|
|
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
|
|
#define CONFIG_SYS_TIMER_COUNTS_DOWN
|
|
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TIMER_RATE 2400000
|
|
#else
|
|
#define CONFIG_SYS_TIMER_RATE 25000000
|
|
#endif
|
|
|
|
/*
|
|
* L4 Watchdog
|
|
*/
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
#define CONFIG_DESIGNWARE_WATCHDOG
|
|
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
|
|
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
|
|
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000
|
|
#endif
|
|
|
|
/*
|
|
* MMC Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_BOUNCE_BUFFER
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_DWMMC
|
|
#define CONFIG_SOCFPGA_DWMMC
|
|
#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
|
|
/* FIXME */
|
|
/* using smaller max blk cnt to avoid flooding the limited stack we have */
|
|
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
|
|
#endif
|
|
|
|
/*
|
|
* NAND Support
|
|
*/
|
|
#ifdef CONFIG_NAND_DENALI
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_DENALI_ECC_SIZE 512
|
|
#define CONFIG_SYS_NAND_REGS_BASE SOCFPGA_NANDREGS_ADDRESS
|
|
#define CONFIG_SYS_NAND_DATA_BASE SOCFPGA_NANDDATA_ADDRESS
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
|
|
#endif
|
|
|
|
/*
|
|
* I2C support
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_BUS_MAX 4
|
|
#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
|
|
/* Using standard mode which the speed up to 100Kb/s */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SPEED1 100000
|
|
#define CONFIG_SYS_I2C_SPEED2 100000
|
|
#define CONFIG_SYS_I2C_SPEED3 100000
|
|
/* Address of device when used as slave */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE1 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE2 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE3 0x02
|
|
#ifndef __ASSEMBLY__
|
|
/* Clock supplied to I2C controller in unit of MHz */
|
|
unsigned int cm_get_l4_sp_clk_hz(void);
|
|
#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
|
|
#endif
|
|
|
|
/*
|
|
* QSPI support
|
|
*/
|
|
/* Enable multiple SPI NOR flash manufacturers */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPI_FLASH_MTD
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
|
|
#endif
|
|
/* QSPI reference clock */
|
|
#ifndef __ASSEMBLY__
|
|
unsigned int cm_get_qspi_controller_clk_hz(void);
|
|
#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
|
|
#endif
|
|
#define CONFIG_CQSPI_DECODER 0
|
|
|
|
/*
|
|
* Designware SPI support
|
|
*/
|
|
|
|
/*
|
|
* Serial Driver
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_NS16550_CLK 1000000
|
|
#else
|
|
#define CONFIG_SYS_NS16550_CLK 100000000
|
|
#endif
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_DWC2
|
|
#define CONFIG_USB_STORAGE
|
|
#endif
|
|
|
|
/*
|
|
* USB Gadget (DFU, UMS)
|
|
*/
|
|
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
|
|
#define CONFIG_USB_FUNCTION_DFU
|
|
#ifdef CONFIG_DM_MMC
|
|
#define CONFIG_DFU_MMC
|
|
#endif
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
/* USB IDs */
|
|
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
|
|
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot environment
|
|
*/
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
|
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
|
|
#if !defined(CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE 4096
|
|
#endif
|
|
|
|
/* Environment for SDMMC boot */
|
|
#if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
|
|
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
|
|
#endif
|
|
|
|
/* Environment for QSPI boot */
|
|
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_OFFSET 0x00100000
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
#endif
|
|
|
|
/*
|
|
* mtd partitioning for serial NOR flash
|
|
*
|
|
* device nor0 <ff705000.spi.0>, # parts = 6
|
|
* #: name size offset mask_flags
|
|
* 0: u-boot 0x00100000 0x00000000 0
|
|
* 1: env1 0x00040000 0x00100000 0
|
|
* 2: env2 0x00040000 0x00140000 0
|
|
* 3: UBI 0x03e80000 0x00180000 0
|
|
* 4: boot 0x00e80000 0x00180000 0
|
|
* 5: rootfs 0x01000000 0x01000000 0
|
|
*
|
|
*/
|
|
#if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
|
|
#define MTDPARTS_DEFAULT "mtdparts=ff705000.spi.0:"\
|
|
"1m(u-boot)," \
|
|
"256k(env1)," \
|
|
"256k(env2)," \
|
|
"14848k(boot)," \
|
|
"16m(rootfs)," \
|
|
"-@1536k(UBI)\0"
|
|
#endif
|
|
|
|
/* UBI and UBIFS support */
|
|
#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#endif
|
|
|
|
/*
|
|
* SPL
|
|
*
|
|
* SRAM Memory layout:
|
|
*
|
|
* 0xFFFF_0000 ...... Start of SRAM
|
|
* 0xFFFF_xxxx ...... Top of stack (grows down)
|
|
* 0xFFFF_yyyy ...... Malloc area
|
|
* 0xFFFF_zzzz ...... Global Data
|
|
* 0xFFFF_FF00 ...... End of SRAM
|
|
*/
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_RAM_DEVICE
|
|
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
|
|
#define CONFIG_SPL_MAX_SIZE (64 * 1024)
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#ifdef CONFIG_DM_MMC
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#endif
|
|
#ifdef CONFIG_DM_SPI
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#endif
|
|
#ifdef CONFIG_SPL_NAND_DENALI
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#endif
|
|
|
|
/* SPL SDMMC boot support */
|
|
#ifdef CONFIG_SPL_MMC_SUPPORT
|
|
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
|
|
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
|
|
#define CONFIG_SPL_LIBDISK_SUPPORT
|
|
#else
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 /* offset 512 sect (256k) */
|
|
#define CONFIG_SPL_LIBDISK_SUPPORT
|
|
#endif
|
|
#endif
|
|
|
|
/* SPL QSPI boot support */
|
|
#ifdef CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
|
|
#endif
|
|
|
|
/* SPL NAND boot support */
|
|
#ifdef CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
|
|
#endif
|
|
|
|
/*
|
|
* Stack setup
|
|
*/
|
|
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
|
|
|
|
#endif /* __CONFIG_SOCFPGA_COMMON_H__ */
|