mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
353 lines
7.2 KiB
C
353 lines
7.2 KiB
C
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* (C) Copyright 2002,2003, Motorola Inc.
|
|
* Xianghua Xiao, (X.Xiao@motorola.com)
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <spd.h>
|
|
|
|
#if defined(CONFIG_OF_FLAT_TREE)
|
|
#include <ft_build.h>
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
|
|
extern long int spd_sdram(void);
|
|
|
|
void local_bus_init(void);
|
|
void sdram_init(void);
|
|
long int fixed_sdram(void);
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts("Board: ADS\n");
|
|
|
|
#ifdef CONFIG_PCI
|
|
printf(" PCI1: 32 bit, %d MHz (compiled)\n",
|
|
CONFIG_SYS_CLK_FREQ / 1000000);
|
|
#else
|
|
printf(" PCI1: disabled\n");
|
|
#endif
|
|
|
|
/*
|
|
* Initialize local bus.
|
|
*/
|
|
local_bus_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
long int
|
|
initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
extern long spd_sdram (void);
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
|
|
puts("Initializing\n");
|
|
|
|
#if defined(CONFIG_DDR_DLL)
|
|
{
|
|
volatile ccsr_gur_t *gur= &immap->im_gur;
|
|
uint temp_ddrdll = 0;
|
|
|
|
/*
|
|
* Work around to stabilize DDR DLL
|
|
*/
|
|
temp_ddrdll = gur->ddrdllcr;
|
|
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
|
|
asm("sync;isync;msync");
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = spd_sdram ();
|
|
#else
|
|
dram_size = fixed_sdram ();
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize and enable DDR ECC.
|
|
*/
|
|
ddr_enable_ecc(dram_size);
|
|
#endif
|
|
|
|
/*
|
|
* Initialize SDRAM.
|
|
*/
|
|
sdram_init();
|
|
|
|
puts(" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize Local Bus
|
|
*/
|
|
|
|
void
|
|
local_bus_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_gur_t *gur = &immap->im_gur;
|
|
volatile ccsr_lbc_t *lbc = &immap->im_lbc;
|
|
|
|
uint clkdiv;
|
|
uint lbc_hz;
|
|
sys_info_t sysinfo;
|
|
|
|
/*
|
|
* Errata LBC11.
|
|
* Fix Local Bus clock glitch when DLL is enabled.
|
|
*
|
|
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
|
|
* If localbus freq is > 133Mhz, DLL can be safely enabled.
|
|
* Between 66 and 133, the DLL is enabled with an override workaround.
|
|
*/
|
|
|
|
get_sys_info(&sysinfo);
|
|
clkdiv = lbc->lcrr & 0x0f;
|
|
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
|
|
|
if (lbc_hz < 66) {
|
|
lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */
|
|
|
|
} else if (lbc_hz >= 133) {
|
|
lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
|
|
|
} else {
|
|
/*
|
|
* On REV1 boards, need to change CLKDIV before enable DLL.
|
|
* Default CLKDIV is 8, change it to 4 temporarily.
|
|
*/
|
|
uint pvr = get_pvr();
|
|
uint temp_lbcdll = 0;
|
|
|
|
if (pvr == PVR_85xx_REV1) {
|
|
/* FIXME: Justify the high bit here. */
|
|
lbc->lcrr = 0x10000004;
|
|
}
|
|
|
|
lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
|
udelay(200);
|
|
|
|
/*
|
|
* Sample LBC DLL ctrl reg, upshift it to set the
|
|
* override bits.
|
|
*/
|
|
temp_lbcdll = gur->lbcdllcr;
|
|
gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
|
|
asm("sync;isync;msync");
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
void
|
|
sdram_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_lbc_t *lbc= &immap->im_lbc;
|
|
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
|
|
|
|
puts(" SDRAM: ");
|
|
print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
|
|
|
|
/*
|
|
* Setup SDRAM Base and Option Registers
|
|
*/
|
|
lbc->or2 = CFG_OR2_PRELIM;
|
|
lbc->br2 = CFG_BR2_PRELIM;
|
|
lbc->lbcr = CFG_LBC_LBCR;
|
|
asm("msync");
|
|
|
|
lbc->lsrt = CFG_LBC_LSRT;
|
|
lbc->mrtpr = CFG_LBC_MRTPR;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller.
|
|
*/
|
|
lbc->lsdmr = CFG_LBC_LSDMR_1;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_3;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_5;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
}
|
|
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CFG_MEMTEST_START;
|
|
uint *pend = (uint *) CFG_MEMTEST_END;
|
|
uint *p;
|
|
|
|
printf("SDRAM test phase 1:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf("SDRAM test phase 2:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf("SDRAM test passed.\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
long int fixed_sdram (void)
|
|
{
|
|
#ifndef CFG_RAMBOOT
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
|
|
|
|
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
|
|
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
|
|
ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
ddr->sdram_mode = CFG_DDR_MODE;
|
|
ddr->sdram_interval = CFG_DDR_INTERVAL;
|
|
#if defined (CONFIG_DDR_ECC)
|
|
ddr->err_disable = 0x0000000D;
|
|
ddr->err_sbe = 0x00ff0000;
|
|
#endif
|
|
asm("sync;isync;msync");
|
|
udelay(500);
|
|
#if defined (CONFIG_DDR_ECC)
|
|
/* Enable ECC checking */
|
|
ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
|
|
#else
|
|
ddr->sdram_cfg = CFG_DDR_CONTROL;
|
|
#endif
|
|
asm("sync; isync; msync");
|
|
udelay(500);
|
|
#endif
|
|
return CFG_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* Initialize PCI Devices, report devices found.
|
|
*/
|
|
|
|
|
|
static struct pci_controller hose;
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
void
|
|
pci_init_board(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
pci_mpc85xx_init(&hose);
|
|
#endif /* CONFIG_PCI */
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
|
|
void
|
|
ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 *p;
|
|
int len;
|
|
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
p = ft_get_prop(blob, "/memory/reg", &len);
|
|
if (p != NULL) {
|
|
*p++ = cpu_to_be32(bd->bi_memstart);
|
|
*p = cpu_to_be32(bd->bi_memsize);
|
|
}
|
|
}
|
|
#endif
|