mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
We are now using an env_ prefix for environment functions. Rename these other functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default() Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
213 lines
5.5 KiB
C
213 lines
5.5 KiB
C
/*
|
|
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
#include "corenet_ds.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard (void)
|
|
{
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
|
|
defined(CONFIG_TARGET_P5040DS)
|
|
unsigned int i;
|
|
#endif
|
|
static const char * const freq[] = {"100", "125", "156.25", "212.5" };
|
|
|
|
printf("Board: %sDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("Promjet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
|
|
|
|
/* Display the actual SERDES reference clocks as configured by the
|
|
* dip switches on the board. Note that the SWx registers could
|
|
* technically be set to force the reference clocks to match the
|
|
* values that the SERDES expects (or vice versa). For now, however,
|
|
* we just display both values and hope the user notices when they
|
|
* don't match.
|
|
*/
|
|
puts("SERDES Reference Clocks: ");
|
|
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
|
|
defined(CONFIG_TARGET_P5040DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
|
|
printf("Bank%u=%sMhz ", i+1, freq[clock]);
|
|
}
|
|
#ifdef CONFIG_TARGET_P5040DS
|
|
/* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
|
|
sw = in_8(&PIXIS_SW(9));
|
|
printf("Bank4=%sMhz ", freq[sw & 3]);
|
|
#endif
|
|
puts("\n");
|
|
#else
|
|
sw = in_8(&PIXIS_SW(3));
|
|
/* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
|
|
/* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
|
|
/* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
|
|
printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
|
|
printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
|
|
printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/*
|
|
* P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
|
|
* disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
|
|
* the noise introduced by these unterminated and unused clock pairs.
|
|
*/
|
|
setbits_be32(&gur->ddrclkdr, 0x001B001B);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define NUM_SRDS_BANKS 3
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 actual[NUM_SRDS_BANKS];
|
|
unsigned int i;
|
|
u8 sw;
|
|
|
|
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
|
|
defined(CONFIG_TARGET_P5040DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
switch (clock) {
|
|
case 0:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
|
|
break;
|
|
case 1:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
|
|
break;
|
|
case 2:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
|
|
break;
|
|
default:
|
|
printf("Warning: SDREFCLK%u switch setting of '11' is "
|
|
"unsupported\n", i + 1);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
/* Warn if the expected SERDES reference clocks don't match the
|
|
* actual reference clocks. This needs to be done after calling
|
|
* p4080_erratum_serdes8(), since that function may modify the clocks.
|
|
*/
|
|
sw = in_8(&PIXIS_SW(3));
|
|
actual[0] = (sw & 0x40) ?
|
|
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
|
|
actual[1] = (sw & 0x20) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
actual[2] = (sw & 0x10) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
|
if (expected != actual[i]) {
|
|
printf("Warning: SERDES bank %u expects reference clock"
|
|
" %sMHz, but actual is %sMHz\n", i + 1,
|
|
serdes_clock_to_string(expected),
|
|
serdes_clock_to_string(actual[i]));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|