mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Jagan Teki](/assets/img/avatar_default.png)
Add new board names for existing board support imx6q - icore and icore_rqs boards imx6ul - geam6ul and isiot boards Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
34 lines
874 B
Plaintext
34 lines
874 B
Plaintext
Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit:
|
|
-------------------------------------------------------------------
|
|
|
|
$ make mrproper
|
|
|
|
- Configure U-Boot for Engicam GEAM6UL:
|
|
$ make imx6ul_geam_mmc_defconfig
|
|
|
|
- Configure U-Boot for Engicam Is.IoT MX6UL:
|
|
$ make imx6ul_isiot_mmc_defconfig
|
|
|
|
- Build U-Boot
|
|
$ make
|
|
|
|
This will generate the SPL image called SPL and the u-boot-dtb.img.
|
|
|
|
- Flash the SPL image into the micro SD card:
|
|
|
|
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
|
|
|
|
- Flash the u-boot-dtb.img image into the micro SD card:
|
|
|
|
sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
|
|
|
|
- Jumper settings:
|
|
|
|
MMC Boot: JM3 Closed
|
|
|
|
- Connect the Serial cable between the Starter Kit and the PC for the console.
|
|
(J28 is the Linux Serial console connector)
|
|
|
|
- Insert the micro SD card in the board, power it up and U-Boot messages should
|
|
come up.
|