mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Christopher Spinrath](/assets/img/avatar_default.png)
Commit 5248930ebf
("dm: imx: cm_fx6: Enable more driver model support")
enabled driver model support for MMC. Remove the old mmc init code, which
is no longer used, from the board file.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
769 lines
19 KiB
C
769 lines
19 KiB
C
/*
|
|
* Board functions for Compulab CM-FX6 board
|
|
*
|
|
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
|
|
*
|
|
* Author: Nikita Kiryanov <nikita@compulab.co.il>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ahci.h>
|
|
#include <dm.h>
|
|
#include <dwc_ahsata.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <miiphy.h>
|
|
#include <mtd_node.h>
|
|
#include <netdev.h>
|
|
#include <errno.h>
|
|
#include <usb.h>
|
|
#include <fdt_support.h>
|
|
#include <sata.h>
|
|
#include <splash.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/sata.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <dm/platform_data/serial_mxc.h>
|
|
#include <dm/device-internal.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include "common.h"
|
|
#include "../common/eeprom.h"
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_SPLASH_SCREEN
|
|
static struct splash_location cm_fx6_splash_locations[] = {
|
|
{
|
|
.name = "sf",
|
|
.storage = SPLASH_STORAGE_SF,
|
|
.flags = SPLASH_STORAGE_RAW,
|
|
.offset = 0x100000,
|
|
},
|
|
{
|
|
.name = "mmc_fs",
|
|
.storage = SPLASH_STORAGE_MMC,
|
|
.flags = SPLASH_STORAGE_FS,
|
|
.devpart = "2:1",
|
|
},
|
|
{
|
|
.name = "usb_fs",
|
|
.storage = SPLASH_STORAGE_USB,
|
|
.flags = SPLASH_STORAGE_FS,
|
|
.devpart = "0:1",
|
|
},
|
|
{
|
|
.name = "sata_fs",
|
|
.storage = SPLASH_STORAGE_SATA,
|
|
.flags = SPLASH_STORAGE_FS,
|
|
.devpart = "0:1",
|
|
},
|
|
};
|
|
|
|
int splash_screen_prepare(void)
|
|
{
|
|
return splash_source_load(cm_fx6_splash_locations,
|
|
ARRAY_SIZE(cm_fx6_splash_locations));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IMX_HDMI
|
|
static void cm_fx6_enable_hdmi(struct display_info_t const *dev)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
imx_setup_hdmi();
|
|
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
|
|
imx_enable_hdmi_phy();
|
|
}
|
|
|
|
static struct display_info_t preset_hdmi_1024X768 = {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.enable = cm_fx6_enable_hdmi,
|
|
.mode = {
|
|
.name = "HDMI",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 40385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
}
|
|
};
|
|
|
|
static void cm_fx6_setup_display(void)
|
|
{
|
|
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
enable_ipu_clock();
|
|
clrbits_le32(&iomuxc_regs->gpr[3], MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
|
|
}
|
|
|
|
int board_video_skip(void)
|
|
{
|
|
int ret;
|
|
struct display_info_t *preset;
|
|
char const *panel = env_get("displaytype");
|
|
|
|
if (!panel) /* Also accept panel for backward compatibility */
|
|
panel = env_get("panel");
|
|
|
|
if (!panel)
|
|
return -ENOENT;
|
|
|
|
if (!strcmp(panel, "HDMI"))
|
|
preset = &preset_hdmi_1024X768;
|
|
else
|
|
return -EINVAL;
|
|
|
|
ret = ipuv3_fb_init(&preset->mode, 0, preset->pixfmt);
|
|
if (ret) {
|
|
printf("Can't init display %s: %d\n", preset->mode.name, ret);
|
|
return ret;
|
|
}
|
|
|
|
preset->enable(preset);
|
|
printf("Display: %s (%ux%u)\n", preset->mode.name, preset->mode.xres,
|
|
preset->mode.yres);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline void cm_fx6_setup_display(void) {}
|
|
#endif /* CONFIG_VIDEO_IPUV3 */
|
|
|
|
#ifdef CONFIG_DWC_AHSATA
|
|
static int cm_fx6_issd_gpios[] = {
|
|
/* The order of the GPIOs in the array is important! */
|
|
CM_FX6_SATA_LDO_EN,
|
|
CM_FX6_SATA_PHY_SLP,
|
|
CM_FX6_SATA_NRSTDLY,
|
|
CM_FX6_SATA_PWREN,
|
|
CM_FX6_SATA_NSTANDBY1,
|
|
CM_FX6_SATA_NSTANDBY2,
|
|
};
|
|
|
|
static void cm_fx6_sata_power(int on)
|
|
{
|
|
int i;
|
|
|
|
if (!on) { /* tell the iSSD that the power will be removed */
|
|
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 1);
|
|
mdelay(10);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cm_fx6_issd_gpios); i++) {
|
|
gpio_direction_output(cm_fx6_issd_gpios[i], on);
|
|
udelay(100);
|
|
}
|
|
|
|
if (!on) /* for compatibility lower the power loss interrupt */
|
|
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0);
|
|
}
|
|
|
|
static iomux_v3_cfg_t const sata_pads[] = {
|
|
/* SATA PWR */
|
|
IOMUX_PADS(PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
/* SATA CTRL */
|
|
IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
static int cm_fx6_setup_issd(void)
|
|
{
|
|
int ret, i;
|
|
|
|
SETUP_IOMUX_PADS(sata_pads);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cm_fx6_issd_gpios); i++) {
|
|
ret = gpio_request(cm_fx6_issd_gpios[i], "sata");
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_request(CM_FX6_SATA_PWLOSS_INT, "sata_pwloss_int");
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CM_FX6_SATA_INIT_RETRIES 10
|
|
|
|
#else
|
|
static int cm_fx6_setup_issd(void) { return 0; }
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_MXC
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
I2C_PADS(i2c0_pads,
|
|
PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_EIM_D21__GPIO3_IO21 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(3, 21),
|
|
PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(3, 28));
|
|
|
|
I2C_PADS(i2c1_pads,
|
|
PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_KEY_COL3__GPIO4_IO12 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(4, 12),
|
|
PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_KEY_ROW3__GPIO4_IO13 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(4, 13));
|
|
|
|
I2C_PADS(i2c2_pads,
|
|
PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(1, 3),
|
|
PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(I2C_PAD_CTRL),
|
|
IMX_GPIO_NR(1, 6));
|
|
|
|
|
|
static int cm_fx6_setup_one_i2c(int busnum, struct i2c_pads_info *pads)
|
|
{
|
|
int ret;
|
|
|
|
ret = setup_i2c(busnum, CONFIG_SYS_I2C_SPEED, 0x7f, pads);
|
|
if (ret)
|
|
printf("Warning: I2C%d setup failed: %d\n", busnum, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cm_fx6_setup_i2c(void)
|
|
{
|
|
int ret = 0, err;
|
|
|
|
/* i2c<x>_pads are wierd macro variables; we can't use an array */
|
|
err = cm_fx6_setup_one_i2c(0, I2C_PADS_INFO(i2c0_pads));
|
|
if (err)
|
|
ret = err;
|
|
err = cm_fx6_setup_one_i2c(1, I2C_PADS_INFO(i2c1_pads));
|
|
if (err)
|
|
ret = err;
|
|
err = cm_fx6_setup_one_i2c(2, I2C_PADS_INFO(i2c2_pads));
|
|
if (err)
|
|
ret = err;
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
static int cm_fx6_setup_i2c(void) { return 0; }
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
|
|
#define MX6_USBNC_BASEADDR 0x2184800
|
|
#define USBNC_USB_H1_PWR_POL (1 << 9)
|
|
|
|
static int cm_fx6_setup_usb_host(void)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request(CM_FX6_USB_HUB_RST, "usb hub rst");
|
|
if (err)
|
|
return err;
|
|
|
|
SETUP_IOMUX_PAD(PAD_GPIO_0__USB_H1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL));
|
|
SETUP_IOMUX_PAD(PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cm_fx6_setup_usb_otg(void)
|
|
{
|
|
int err;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
err = gpio_request(SB_FX6_USB_OTG_PWR, "usb-pwr");
|
|
if (err) {
|
|
printf("USB OTG pwr gpio request failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
SETUP_IOMUX_PAD(PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL));
|
|
SETUP_IOMUX_PAD(PAD_ENET_RX_ER__USB_OTG_ID |
|
|
MUX_PAD_CTRL(WEAK_PULLDOWN));
|
|
clrbits_le32(&iomux->gpr[1], IOMUXC_GPR1_OTG_ID_MASK);
|
|
/* disable ext. charger detect, or it'll affect signal quality at dp. */
|
|
return gpio_direction_output(SB_FX6_USB_OTG_PWR, 0);
|
|
}
|
|
|
|
int board_usb_phy_mode(int port)
|
|
{
|
|
return USB_INIT_HOST;
|
|
}
|
|
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
int ret;
|
|
u32 *usbnc_usb_uh1_ctrl = (u32 *)(MX6_USBNC_BASEADDR + 4);
|
|
|
|
/* Only 1 host controller in use. port 0 is OTG & needs no attention */
|
|
if (port != 1)
|
|
return 0;
|
|
|
|
/* Set PWR polarity to match power switch's enable polarity */
|
|
setbits_le32(usbnc_usb_uh1_ctrl, USBNC_USB_H1_PWR_POL);
|
|
ret = gpio_direction_output(CM_FX6_USB_HUB_RST, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(10);
|
|
ret = gpio_direction_output(CM_FX6_USB_HUB_RST, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
if (port == 0)
|
|
return gpio_direction_output(SB_FX6_USB_OTG_PWR, on);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int cm_fx6_setup_usb_otg(void) { return 0; }
|
|
static int cm_fx6_setup_usb_host(void) { return 0; }
|
|
#endif
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
static int mx6_rgmii_rework(struct phy_device *phydev)
|
|
{
|
|
unsigned short val;
|
|
|
|
/* Ar8031 phy SmartEEE feature cause link status generates glitch,
|
|
* which cause ethernet link down/up issue, so disable SmartEEE
|
|
*/
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x3);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
|
|
val &= ~(0x1 << 8);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
|
|
|
|
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
|
|
val &= 0xffe3;
|
|
val |= 0x18;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
|
|
|
|
/* introduce tx clock delay */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
|
|
val |= 0x0100;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
mx6_rgmii_rework(phydev);
|
|
|
|
if (phydev->drv->config)
|
|
return phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const enet_pads[] = {
|
|
IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_GPIO_0__CCM_CLKO1 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(0x84)),
|
|
IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
|
|
MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
|
|
MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
|
|
MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
};
|
|
|
|
static int handle_mac_address(char *env_var, uint eeprom_bus)
|
|
{
|
|
unsigned char enetaddr[6];
|
|
int rc;
|
|
|
|
rc = eth_env_get_enetaddr(env_var, enetaddr);
|
|
if (rc)
|
|
return 0;
|
|
|
|
rc = cl_eeprom_read_mac_addr(enetaddr, eeprom_bus);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (!is_valid_ethaddr(enetaddr))
|
|
return -1;
|
|
|
|
return eth_env_set_enetaddr(env_var, enetaddr);
|
|
}
|
|
|
|
#define SB_FX6_I2C_EEPROM_BUS 0
|
|
#define NO_MAC_ADDR "No MAC address found for %s\n"
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int err;
|
|
|
|
if (handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS))
|
|
printf(NO_MAC_ADDR, "primary NIC");
|
|
|
|
if (handle_mac_address("eth1addr", SB_FX6_I2C_EEPROM_BUS))
|
|
printf(NO_MAC_ADDR, "secondary NIC");
|
|
|
|
SETUP_IOMUX_PADS(enet_pads);
|
|
/* phy reset */
|
|
err = gpio_request(CM_FX6_ENET_NRST, "enet_nrst");
|
|
if (err)
|
|
printf("Etnernet NRST gpio request failed: %d\n", err);
|
|
gpio_direction_output(CM_FX6_ENET_NRST, 0);
|
|
udelay(500);
|
|
gpio_set_value(CM_FX6_ENET_NRST, 1);
|
|
enable_enet_clk(1);
|
|
return cpu_eth_init(bis);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
static iomux_v3_cfg_t const nand_pads[] = {
|
|
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
static void cm_fx6_setup_gpmi_nand(void)
|
|
{
|
|
SETUP_IOMUX_PADS(nand_pads);
|
|
/* Enable clock roots */
|
|
enable_usdhc_clk(1, 3);
|
|
enable_usdhc_clk(1, 4);
|
|
|
|
setup_gpmi_io_clk(MXC_CCM_CS2CDR_ENFC_CLK_PODF(0xf) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED(1) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL(0));
|
|
}
|
|
#else
|
|
static void cm_fx6_setup_gpmi_nand(void) {}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MXC_SPI
|
|
int cm_fx6_setup_ecspi(void)
|
|
{
|
|
cm_fx6_set_ecspi_iomux();
|
|
return gpio_request(CM_FX6_ECSPI_BUS0_CS0, "ecspi_bus0_cs0");
|
|
}
|
|
#else
|
|
int cm_fx6_setup_ecspi(void) { return 0; }
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
#define USDHC3_PATH "/soc/aips-bus@02100000/usdhc@02198000/"
|
|
|
|
struct node_info nodes[] = {
|
|
/*
|
|
* Both entries target the same flash chip. The st,m25p compatible
|
|
* is used in the vendor device trees, while upstream uses (the
|
|
* documented) jedec,spi-nor compatible.
|
|
*/
|
|
{ "st,m25p", MTD_DEV_TYPE_NOR, },
|
|
{ "jedec,spi-nor", MTD_DEV_TYPE_NOR, },
|
|
};
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 baseboard_rev;
|
|
int nodeoffset;
|
|
uint8_t enetaddr[6];
|
|
char baseboard_name[16];
|
|
int err;
|
|
|
|
fdt_shrink_to_minimum(blob, 0); /* Make room for new properties */
|
|
|
|
/* MAC addr */
|
|
if (eth_env_get_enetaddr("ethaddr", enetaddr)) {
|
|
fdt_find_and_setprop(blob,
|
|
"/soc/aips-bus@02100000/ethernet@02188000",
|
|
"local-mac-address", enetaddr, 6, 1);
|
|
}
|
|
|
|
if (eth_env_get_enetaddr("eth1addr", enetaddr)) {
|
|
fdt_find_and_setprop(blob, "/eth@pcie", "local-mac-address",
|
|
enetaddr, 6, 1);
|
|
}
|
|
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
|
|
baseboard_rev = cl_eeprom_get_board_rev(0);
|
|
err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
|
|
if (err || baseboard_rev == 0)
|
|
return 0; /* Assume not an early revision SB-FX6m baseboard */
|
|
|
|
if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
|
|
nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
|
|
fdt_delprop(blob, nodeoffset, "cd-gpios");
|
|
fdt_find_and_setprop(blob, USDHC3_PATH, "broken-cd",
|
|
NULL, 0, 1);
|
|
fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
|
|
NULL, 0, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
int ret;
|
|
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
cm_fx6_setup_gpmi_nand();
|
|
|
|
ret = cm_fx6_setup_ecspi();
|
|
if (ret)
|
|
printf("Warning: ECSPI setup failed: %d\n", ret);
|
|
|
|
ret = cm_fx6_setup_usb_otg();
|
|
if (ret)
|
|
printf("Warning: USB OTG setup failed: %d\n", ret);
|
|
|
|
ret = cm_fx6_setup_usb_host();
|
|
if (ret)
|
|
printf("Warning: USB host setup failed: %d\n", ret);
|
|
|
|
/*
|
|
* cm-fx6 may have iSSD not assembled and in this case it has
|
|
* bypasses for a (m)SATA socket on the baseboard. The socketed
|
|
* device is not controlled by those GPIOs. So just print a warning
|
|
* if the setup fails.
|
|
*/
|
|
ret = cm_fx6_setup_issd();
|
|
if (ret)
|
|
printf("Warning: iSSD setup failed: %d\n", ret);
|
|
|
|
/* Warn on failure but do not abort boot */
|
|
ret = cm_fx6_setup_i2c();
|
|
if (ret)
|
|
printf("Warning: I2C setup failed: %d\n", ret);
|
|
|
|
cm_fx6_setup_display();
|
|
|
|
/* This should be done in the MMC driver when MX6 has a clock driver */
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
if (IS_ENABLED(CONFIG_BLK)) {
|
|
int i;
|
|
|
|
cm_fx6_set_usdhc_iomux();
|
|
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++)
|
|
enable_usdhc_clk(1, i);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: CM-FX6\n");
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
cl_print_pcb_info();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
|
|
switch (gd->ram_size) {
|
|
case 0x10000000: /* DDR_16BIT_256MB */
|
|
gd->bd->bi_dram[0].size = 0x10000000;
|
|
gd->bd->bi_dram[1].size = 0;
|
|
break;
|
|
case 0x20000000: /* DDR_32BIT_512MB */
|
|
gd->bd->bi_dram[0].size = 0x20000000;
|
|
gd->bd->bi_dram[1].size = 0;
|
|
break;
|
|
case 0x40000000:
|
|
if (is_cpu_type(MXC_CPU_MX6SOLO)) { /* DDR_32BIT_1GB */
|
|
gd->bd->bi_dram[0].size = 0x20000000;
|
|
gd->bd->bi_dram[1].size = 0x20000000;
|
|
} else { /* DDR_64BIT_1GB */
|
|
gd->bd->bi_dram[0].size = 0x40000000;
|
|
gd->bd->bi_dram[1].size = 0;
|
|
}
|
|
break;
|
|
case 0x80000000: /* DDR_64BIT_2GB */
|
|
gd->bd->bi_dram[0].size = 0x40000000;
|
|
gd->bd->bi_dram[1].size = 0x40000000;
|
|
break;
|
|
case 0xEFF00000: /* DDR_64BIT_4GB */
|
|
gd->bd->bi_dram[0].size = 0x70000000;
|
|
gd->bd->bi_dram[1].size = 0x7FF00000;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = imx_ddr_size();
|
|
switch (gd->ram_size) {
|
|
case 0x10000000:
|
|
case 0x20000000:
|
|
case 0x40000000:
|
|
case 0x80000000:
|
|
break;
|
|
case 0xF0000000:
|
|
gd->ram_size -= 0x100000;
|
|
break;
|
|
default:
|
|
printf("ERROR: Unsupported DRAM size 0x%lx\n", gd->ram_size);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS);
|
|
}
|
|
|
|
static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = {
|
|
.reg = (struct mxc_uart *)UART4_BASE,
|
|
};
|
|
|
|
U_BOOT_DEVICE(cm_fx6_serial) = {
|
|
.name = "serial_mxc",
|
|
.platdata = &cm_fx6_mxc_serial_plat,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(AHCI)
|
|
static int sata_imx_probe(struct udevice *dev)
|
|
{
|
|
int i, err;
|
|
|
|
/* Make sure this gpio has logical 0 value */
|
|
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0);
|
|
udelay(100);
|
|
cm_fx6_sata_power(1);
|
|
|
|
for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) {
|
|
err = setup_sata();
|
|
if (err) {
|
|
printf("SATA setup failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
err = dwc_ahsata_probe(dev);
|
|
if (!err)
|
|
break;
|
|
|
|
/* There is no device on the SATA port */
|
|
if (sata_dm_port_status(0, 0) == 0)
|
|
break;
|
|
|
|
/* There's a device, but link not established. Retry */
|
|
device_remove(dev, DM_REMOVE_NORMAL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sata_imx_remove(struct udevice *dev)
|
|
{
|
|
cm_fx6_sata_power(0);
|
|
mdelay(250);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct ahci_ops sata_imx_ops = {
|
|
.port_status = dwc_ahsata_port_status,
|
|
.reset = dwc_ahsata_bus_reset,
|
|
.scan = dwc_ahsata_scan,
|
|
};
|
|
|
|
static const struct udevice_id sata_imx_ids[] = {
|
|
{ .compatible = "fsl,imx6q-ahci" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sata_imx) = {
|
|
.name = "dwc_ahci",
|
|
.id = UCLASS_AHCI,
|
|
.of_match = sata_imx_ids,
|
|
.ops = &sata_imx_ops,
|
|
.probe = sata_imx_probe,
|
|
.remove = sata_imx_remove, /* reset bus to stop it */
|
|
};
|
|
#endif /* AHCI */
|