mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Suman Anna](/assets/img/avatar_default.png)
Commit 6ae4c3efbd
("ARM: DRA7: Add pinctrl register definitions")
has added new macros for pinmux configuration in line with the
kernel definitions. Fixup the current pinctrl data for the CompuLab
CL-SOM-AM57x board to use these new macros to facilitate the removal
of the old macros.
NOTE:
The PEN and PDIS macro values used previously were actually defined
inversely, a value of 1 in bit position 16 actually means that the
internal pullup/pulldown is disabled and not enabled as inferred by
PEN. So, previous pinmux config data such as (PDIS | PTU) is confusing
as it actually was meant for enabling internal pullup. The data is
fixed up only to be equivalent to the previous data.
Signed-off-by: Suman Anna <s-anna@ti.com>
125 lines
5.1 KiB
C
125 lines
5.1 KiB
C
/*
|
|
* Pinmux configuration for CompuLab CL-SOM-AM57x board
|
|
*
|
|
* (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
|
|
*
|
|
* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mux_dra7xx.h>
|
|
|
|
/* Serial console */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_console[] = {
|
|
{UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */
|
|
{UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */
|
|
};
|
|
|
|
/* PMIC I2C */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = {
|
|
{MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */
|
|
{MCASP1_FSR, (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */
|
|
};
|
|
|
|
/* Green GPIO led */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = {
|
|
{GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */
|
|
};
|
|
|
|
/* MMC/SD Card */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = {
|
|
{MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CLK */
|
|
{MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CMD */
|
|
{MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */
|
|
{MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */
|
|
{MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */
|
|
{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */
|
|
{MMC1_SDCD, (M14 | PIN_INPUT) }, /* MMC1_SDCD */
|
|
{MMC1_SDWP, (M14 | PIN_INPUT) }, /* MMC1_SDWP */
|
|
};
|
|
|
|
/* WiFi - must be in the safe mode on boot */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = {
|
|
{UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */
|
|
{UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */
|
|
{UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */
|
|
{UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */
|
|
{UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */
|
|
{UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */
|
|
};
|
|
|
|
/* QSPI */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = {
|
|
{GPMC_A13, (M1 | PIN_INPUT) }, /* GPMC_A13.QSPI1_RTCLK */
|
|
{GPMC_A18, (M1 | PIN_INPUT) }, /* GPMC_A18.QSPI1_SCLK */
|
|
{GPMC_A16, (M1 | PIN_INPUT) }, /* GPMC_A16.QSPI1_D0 */
|
|
{GPMC_A17, (M1 | PIN_INPUT) }, /* GPMC_A17.QSPI1_D1 */
|
|
{GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */
|
|
};
|
|
|
|
/* GPIO Expander I2C */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = {
|
|
{MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */
|
|
{MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */
|
|
};
|
|
|
|
/* eMMC internal storage */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = {
|
|
{GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */
|
|
{GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */
|
|
{GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */
|
|
{GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */
|
|
{GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */
|
|
{GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */
|
|
{GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */
|
|
{GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */
|
|
{GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */
|
|
{GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */
|
|
};
|
|
|
|
/* usb1_drvvbus */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = {
|
|
/* USB1_DRVVBUS.USB1_DRVVBUS */
|
|
{USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) },
|
|
};
|
|
|
|
/* Ethernet */
|
|
static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = {
|
|
/* MDIO bus */
|
|
{VIN2A_D10, (M3 | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK */
|
|
{VIN2A_D11, (M3 | PIN_INPUT_PULLUP) }, /* VIN2A_D11.MDIO_D */
|
|
/* EMAC Slave 1 at addr 0x1 - Default interface */
|
|
{VIN2A_D12, (M3 | PIN_OUTPUT) }, /* VIN2A_D12.RGMII1_TXC */
|
|
{VIN2A_D13, (M3 | PIN_OUTPUT) }, /* VIN2A_D13.RGMII1_TXCTL */
|
|
{VIN2A_D14, (M3 | PIN_OUTPUT) }, /* VIN2A_D14.RGMII1_TXD3 */
|
|
{VIN2A_D15, (M3 | PIN_OUTPUT) }, /* VIN2A_D15.RGMII1_TXD2 */
|
|
{VIN2A_D16, (M3 | PIN_OUTPUT) }, /* VIN2A_D16.RGMII1_TXD1 */
|
|
{VIN2A_D17, (M3 | PIN_OUTPUT) }, /* VIN2A_D17.RGMII1_TXD0 */
|
|
{VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */
|
|
{VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */
|
|
{VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */
|
|
{VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */
|
|
{VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */
|
|
{VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */
|
|
/* Eth PHY1 reset GPIOs*/
|
|
{VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */
|
|
};
|
|
|
|
#define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \
|
|
mux_array, ARRAY_SIZE(mux_array))
|
|
|
|
void set_muxconf_regs(void)
|
|
{
|
|
SET_MUX(cl_som_am57x_padconf_console);
|
|
SET_MUX(cl_som_am57x_padconf_pmic);
|
|
SET_MUX(cl_som_am57x_padconf_green_led);
|
|
SET_MUX(cl_som_am57x_padconf_sd_card);
|
|
SET_MUX(cl_som_am57x_padconf_wifi);
|
|
SET_MUX(cl_som_am57x_padconf_qspi);
|
|
SET_MUX(cl_som_am57x_padconf_i2c_gpio);
|
|
SET_MUX(cl_som_am57x_padconf_emmc);
|
|
SET_MUX(cl_som_am57x_padconf_usb);
|
|
SET_MUX(cl_som_am57x_padconf_ethernet);
|
|
}
|