mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
- add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/ Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Tom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
388 lines
10 KiB
C
388 lines
10 KiB
C
/*
|
|
* Maintainer : Steve Sakoman <steve@sakoman.com>
|
|
*
|
|
* Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
* Sunil Kumar <sunilsaini05@gmail.com>
|
|
* Shashi Ranjan <shashiranjanmca05@gmail.com>
|
|
*
|
|
* (C) Copyright 2004-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <twl4030.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/omap_gpmc.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include "overo.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define TWL4030_I2C_BUS 0
|
|
#define EXPANSION_EEPROM_I2C_BUS 2
|
|
#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
|
|
|
|
#define GUMSTIX_SUMMIT 0x01000200
|
|
#define GUMSTIX_TOBI 0x02000200
|
|
#define GUMSTIX_TOBI_DUO 0x03000200
|
|
#define GUMSTIX_PALO35 0x04000200
|
|
#define GUMSTIX_PALO43 0x05000200
|
|
#define GUMSTIX_CHESTNUT43 0x06000200
|
|
#define GUMSTIX_PINTO 0x07000200
|
|
#define GUMSTIX_GALLOP43 0x08000200
|
|
|
|
#define ETTUS_USRP_E 0x01000300
|
|
|
|
#define GUMSTIX_NO_EEPROM 0xffffffff
|
|
|
|
static struct {
|
|
unsigned int device_vendor;
|
|
unsigned char revision;
|
|
unsigned char content;
|
|
char fab_revision[8];
|
|
char env_var[16];
|
|
char env_setting[64];
|
|
} expansion_config;
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
static void setup_net_chip(void);
|
|
#endif
|
|
|
|
/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
|
|
static const u32 gpmc_lan_config[] = {
|
|
NET_LAN9221_GPMC_CONFIG1,
|
|
NET_LAN9221_GPMC_CONFIG2,
|
|
NET_LAN9221_GPMC_CONFIG3,
|
|
NET_LAN9221_GPMC_CONFIG4,
|
|
NET_LAN9221_GPMC_CONFIG5,
|
|
NET_LAN9221_GPMC_CONFIG6,
|
|
/*CONFIG7- computed as params */
|
|
};
|
|
|
|
/*
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
|
/* board id for Linux */
|
|
gd->bd->bi_arch_number = MACH_TYPE_OVERO;
|
|
/* boot param addr */
|
|
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: get_board_revision
|
|
* Description: Returns the board revision
|
|
*/
|
|
int get_board_revision(void)
|
|
{
|
|
int revision;
|
|
|
|
#ifdef CONFIG_SYS_I2C_OMAP34XX
|
|
unsigned char data;
|
|
|
|
/* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
|
|
/* these boards should return a revision number of 0 */
|
|
/* the code below forces a 4030 RTC irq to ensure that gpio112 is low */
|
|
i2c_set_bus_num(TWL4030_I2C_BUS);
|
|
data = 0x01;
|
|
i2c_write(0x4B, 0x29, 1, &data, 1);
|
|
data = 0x0c;
|
|
i2c_write(0x4B, 0x2b, 1, &data, 1);
|
|
i2c_read(0x4B, 0x2a, 1, &data, 1);
|
|
#endif
|
|
|
|
if (!gpio_request(112, "") &&
|
|
!gpio_request(113, "") &&
|
|
!gpio_request(115, "")) {
|
|
|
|
gpio_direction_input(112);
|
|
gpio_direction_input(113);
|
|
gpio_direction_input(115);
|
|
|
|
revision = gpio_get_value(115) << 2 |
|
|
gpio_get_value(113) << 1 |
|
|
gpio_get_value(112);
|
|
} else {
|
|
puts("Error: unable to acquire board revision GPIOs\n");
|
|
revision = -1;
|
|
}
|
|
|
|
return revision;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/*
|
|
* Routine: get_board_mem_timings
|
|
* Description: If we use SPL then there is no x-loader nor config header
|
|
* so we have to setup the DDR timings ourself on both banks.
|
|
*/
|
|
void get_board_mem_timings(struct board_sdrc_timings *timings)
|
|
{
|
|
timings->mr = MICRON_V_MR_165;
|
|
switch (get_board_revision()) {
|
|
case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
|
|
timings->mcfg = MICRON_V_MCFG_165(128 << 20);
|
|
timings->ctrla = MICRON_V_ACTIMA_165;
|
|
timings->ctrlb = MICRON_V_ACTIMB_165;
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
|
|
break;
|
|
case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
|
|
timings->mcfg = MICRON_V_MCFG_200(256 << 20);
|
|
timings->ctrla = MICRON_V_ACTIMA_200;
|
|
timings->ctrlb = MICRON_V_ACTIMB_200;
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
|
|
break;
|
|
case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
|
|
timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
|
|
timings->ctrla = HYNIX_V_ACTIMA_200;
|
|
timings->ctrlb = HYNIX_V_ACTIMB_200;
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
|
|
break;
|
|
case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */
|
|
timings->mcfg = MCFG(512 << 20, 15);
|
|
timings->ctrla = MICRON_V_ACTIMA_200;
|
|
timings->ctrlb = MICRON_V_ACTIMB_200;
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
|
|
break;
|
|
default:
|
|
timings->mcfg = MICRON_V_MCFG_165(128 << 20);
|
|
timings->ctrla = MICRON_V_ACTIMA_165;
|
|
timings->ctrlb = MICRON_V_ACTIMB_165;
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Routine: get_sdio2_config
|
|
* Description: Return information about the wifi module connection
|
|
* Returns 0 if the module connects though a level translator
|
|
* Returns 1 if the module connects directly
|
|
*/
|
|
int get_sdio2_config(void)
|
|
{
|
|
int sdio_direct;
|
|
|
|
if (!gpio_request(130, "") && !gpio_request(139, "")) {
|
|
|
|
gpio_direction_output(130, 0);
|
|
gpio_direction_input(139);
|
|
|
|
sdio_direct = 1;
|
|
gpio_set_value(130, 0);
|
|
if (gpio_get_value(139) == 0) {
|
|
gpio_set_value(130, 1);
|
|
if (gpio_get_value(139) == 1)
|
|
sdio_direct = 0;
|
|
}
|
|
|
|
gpio_direction_input(130);
|
|
} else {
|
|
puts("Error: unable to acquire sdio2 clk GPIOs\n");
|
|
sdio_direct = -1;
|
|
}
|
|
|
|
return sdio_direct;
|
|
}
|
|
|
|
/*
|
|
* Routine: get_expansion_id
|
|
* Description: This function checks for expansion board by checking I2C
|
|
* bus 2 for the availability of an AT24C01B serial EEPROM.
|
|
* returns the device_vendor field from the EEPROM
|
|
*/
|
|
unsigned int get_expansion_id(void)
|
|
{
|
|
i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
|
|
|
|
/* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
|
|
if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
|
|
i2c_set_bus_num(TWL4030_I2C_BUS);
|
|
return GUMSTIX_NO_EEPROM;
|
|
}
|
|
|
|
/* read configuration data */
|
|
i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
|
|
sizeof(expansion_config));
|
|
|
|
i2c_set_bus_num(TWL4030_I2C_BUS);
|
|
|
|
return expansion_config.device_vendor;
|
|
}
|
|
|
|
/*
|
|
* Routine: misc_init_r
|
|
* Description: Configure board specific parts
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
twl4030_power_init();
|
|
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
setup_net_chip();
|
|
#endif
|
|
|
|
printf("Board revision: %d\n", get_board_revision());
|
|
|
|
switch (get_sdio2_config()) {
|
|
case 0:
|
|
puts("Tranceiver detected on mmc2\n");
|
|
MUX_OVERO_SDIO2_TRANSCEIVER();
|
|
break;
|
|
case 1:
|
|
puts("Direct connection on mmc2\n");
|
|
MUX_OVERO_SDIO2_DIRECT();
|
|
break;
|
|
default:
|
|
puts("Unable to detect mmc2 connection type\n");
|
|
}
|
|
|
|
switch (get_expansion_id()) {
|
|
case GUMSTIX_SUMMIT:
|
|
printf("Recognized Summit expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "dvi");
|
|
break;
|
|
case GUMSTIX_TOBI:
|
|
printf("Recognized Tobi expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "dvi");
|
|
break;
|
|
case GUMSTIX_TOBI_DUO:
|
|
printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
/* second lan chip */
|
|
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
|
|
0x2B000000, GPMC_SIZE_16M);
|
|
break;
|
|
case GUMSTIX_PALO35:
|
|
printf("Recognized Palo35 expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "lcd35");
|
|
break;
|
|
case GUMSTIX_PALO43:
|
|
printf("Recognized Palo43 expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "lcd43");
|
|
break;
|
|
case GUMSTIX_CHESTNUT43:
|
|
printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "lcd43");
|
|
break;
|
|
case GUMSTIX_PINTO:
|
|
printf("Recognized Pinto expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
break;
|
|
case GUMSTIX_GALLOP43:
|
|
printf("Recognized Gallop43 expansion board (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
setenv("defaultdisplay", "lcd43");
|
|
break;
|
|
case ETTUS_USRP_E:
|
|
printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
|
|
expansion_config.revision,
|
|
expansion_config.fab_revision);
|
|
MUX_USRP_E();
|
|
setenv("defaultdisplay", "dvi");
|
|
break;
|
|
case GUMSTIX_NO_EEPROM:
|
|
puts("No EEPROM on expansion board\n");
|
|
break;
|
|
default:
|
|
puts("Unrecognized expansion board\n");
|
|
}
|
|
|
|
if (expansion_config.content == 1)
|
|
setenv(expansion_config.env_var, expansion_config.env_setting);
|
|
|
|
dieid_num_r();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers specific to the
|
|
* hardware. Many pins need to be moved from protect to primary
|
|
* mode.
|
|
*/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
MUX_OVERO();
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
/*
|
|
* Routine: setup_net_chip
|
|
* Description: Setting up the configuration GPMC registers specific to the
|
|
* Ethernet hardware.
|
|
*/
|
|
static void setup_net_chip(void)
|
|
{
|
|
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
|
|
/* first lan chip */
|
|
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
|
|
GPMC_SIZE_16M);
|
|
|
|
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
|
|
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
|
|
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
|
|
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
|
|
&ctrl_base->gpmc_nadv_ale);
|
|
|
|
/* Make GPIO 64 as output pin and send a magic pulse through it */
|
|
if (!gpio_request(64, "")) {
|
|
gpio_direction_output(64, 0);
|
|
gpio_set_value(64, 1);
|
|
udelay(1);
|
|
gpio_set_value(64, 0);
|
|
udelay(1);
|
|
gpio_set_value(64, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_SMC911X
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0, -1, -1);
|
|
}
|
|
#endif
|